{"title":"Antennas","description":"","products":[{"product_id":"surecall-cm130-m","title":"SureCall Trucker Mirror Mount Antenna (SC-130W)","description":"\u003cp\u003eThe SC-130W is an exterior antenna designed for mounting to a vehicle mirror. It is ideal for semi-trucks, RVs and boats. \u003c\/p\u003e\n\u003cp\u003eIt is a wideband omni-directional antenna that provides 3 dBi gain.\u003c\/p\u003e\n\u003cp\u003eThe SC-130W is a 30\" antenna with a FME-Female connector. A strong base and mirror mount will hold up in harsh outdoor conditions.\u003c\/p\u003e\n\u003cp\u003eIt includes a complete mounting kit for mirror installation.\u003c\/p\u003e","brand":"SureCall","offers":[{"title":"Default Title","offer_id":857909669,"sku":"SC-130W","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/CM-130M.jpeg?v=1419883338"},{"product_id":"surecall-cm222w","title":"SureCall Dome Antenna (SC-222W)","description":"\u003cp\u003eThe SureCall SC-222W Omni Dome Antenna is a multi-band omni-directional plastic dome antenna that gathers signals from all sides. It provides 2-5 dBi gain and is designed for central locations with 360º coverage. It covers 2G\/3G\/4G as well as WLAN systems for Cellular, PCS, AWS and LTE frequencies.\u003c\/p\u003e\n\u003cp\u003eThe range of the antenna is dependent on three factors: \u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ephysical obstructions;\u003c\/li\u003e\n\u003cli\u003epower generated by the booster;\u003c\/li\u003e\n\u003cli\u003ereception from outside signal received and distributed by the outside antenna\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eBesides the antenna itself, parts include mounting equipment to accommodate a ceiling mount or L-Bracket wall mount. It needs to be mounted to the ceiling for best results and you will need to run a cable to the back of the ceiling.\u003c\/p\u003e\n\u003cp\u003eFor proper installation you will need to drill a 35mm hole in the ceiling and screw the fixing nut to fasten the antenna on the ceiling. The ceiling's thickness must not be more than 20mm \/ 0.78 inches.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":857909769,"sku":"SC-222W","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-222W_web.jpg?v=1491930971"},{"product_id":"surecall-cm248w","title":"SureCall Panel Antenna (SC-248W)","description":"\u003cp\u003eThe SureCall SC-248W Panel antenna is a high gain directional antenna for indoor use. Panel antennas allow optimum reception to targeted areas. \u003cbr\u003e\u003cbr\u003e This SureCall Panel antenna is ideal for soft interior penetration or spot coverage. It offers up to 10dBi of gain across all wireless frequencies (Voice\/3G\/4G\/AWS\/WLAN) and can be mounted to either the wall or ceiling.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":857909777,"sku":"SC-248W","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SureCall_348_Panel_Antenna_7e0b7bdf-3be0-4af8-a0dc-bcaa9cd9289d.jpeg?v=1521057187"},{"product_id":"surecall-cm288w","title":"SureCall 50 Ohm Wide-band Omni-Directional Antenna (SC-288W)","description":"\u003cp\u003eThe SureCall 50 Ohm Wide-band Omni-directional Antenna (SC-288W) is designed for wall or roof mounting. It covers 2G\/3G\/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies, providing 3-4 dB gain. With no obstructions, the range of the SC-288W is up to 50 miles to and from cellular towers.\u003c\/p\u003e\n\u003cp\u003e This is a 50 ohm antenna suitable for use with 50 ohm signal booster kits. A 75 ohm version is also available, the \u003ca title=\"SureCall SC-288W 50 ohm outdoor omnidirectional antenna\" href=\"https:\/\/repeaterstore.myshopify.com\/products\/surecall-cm288w\" target=\"_blank\"\u003eSureCall 50 Ohm Omni-Directional Antenna (SC-288W)\u003c\/a\u003e, for use with 75 ohm signal booster kits like the \u003ca title=\"SureCall Fusion4Home signal booster kit\" href=\"https:\/\/repeaterstore.myshopify.com\/products\/surecall-fusion4home\" target=\"_blank\"\u003eSureCall Fusion4Home\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis omni-directional fiberglass antenna gathers signals from all sides and does not need to be pointed toward a cellular tower. It is ideal for buildings, RVs or marine installations. Includes mounting equipment for either a flat horizontal surface or a wall. For best results, mount the unit in an upright position.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":857909789,"sku":"SC288W","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-288W.jpg?v=1486591215"},{"product_id":"wilson-12-inch-magnetic-mount-antenna","title":"weBoost (Wilson) 12 inch Magnetic Mount Antenna (FME\/SMA-Male) (301103 or 311125)","description":"\u003cp\u003eThe weBoost (Wilson) Dual Band 12 inch Magnetic Mount Antenna is a 12.25 inch dual band omni-directional antenna with 5.12-6.12 dBi of gain. It is a 50 ohm antenna which allows for its use in any of the 50 ohm amplifiers on your site.\u003c\/p\u003e\n\u003cp\u003eThe antenna is made of stainless steel and is fully weather-proof. It comes with 12.5ft of RG174 coaxial cable, terminated by a choice of connectors (see below).\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation:\u003c\/h2\u003e\n\u003cp\u003eThe weBoost Magnetic Mount Antenna is an omni-directional antenna. Omni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.\u003c\/p\u003e\n\u003ch2\u003eMounting Details:\u003c\/h2\u003e\n\u003cp\u003eThe weBoost Magnetic Mount Antenna uses it's included rare earth magnet mount. Magnetic Mount Antennas are portable and improve signal on any vehicle with a steel exterior. They work well on automobiles, pickup trucks, vans, SUVs and can easily be moved from one vehicle to another.\u003c\/p\u003e\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eThere are 2 options for this antenna, differentiated by their connector type:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e301103\u003c\/strong\u003e FME-Female connector. This version has a FME-Female connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e311125\u003c\/strong\u003e SMA-Male connector and Polybag packaging. This version has an SMA-Male connector and is packaged in polybag packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note that the Wilson 12 inch Magnetic Mount Antenna (301103) is an updated version of the Wilson 12 inch Magnetic Mount Antenna (311103), with an identical form factor and performance.\u003c\/p\u003e","brand":"weBoost","offers":[{"title":"FME-Female Connector (301103)","offer_id":967453289,"sku":"301103","price":29.99,"currency_code":"USD","in_stock":true},{"title":"SMA-Male Connector and Polybag Packaging (311125)","offer_id":40170193354855,"sku":"311125","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/301103.png?v=1677617175"},{"product_id":"wilson-1900mhz-yagi-antenna-311124","title":"Wilson 1900MHz Yagi Antenna (311124)","description":"\u003cp\u003eThe Wilson 311124 1900MHz antenna is a 1900MHz directional antenna with 14 dB of gain. It can be used with the Wilson\/weBoost amplifiers on our site.\u003c\/p\u003e\n\u003cp\u003eThe antenna is made of aluminum and is fully weather-proof. It is a yagi antenna with 9 elements. It comes with a 12' RG-174 cable with an N-Female connector.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Wilson 311124 is a directional antenna. Directional antennas need to be pointed towards the nearest cell tower for the best results.\u003c\/p\u003e\n\u003ch2\u003eMounting Details\u003c\/h2\u003e\n\u003cp\u003eThe Wilson 311124 includes mounting equipment to attach to a pole 0.5in-1.5in in diameter. The pole is not included but can be \u003ca href=\"\/products\/wilson-pole-mount-accessory-kit-901117\" title=\"Wilson pole mount accessory kit\"\u003epurchased separately\u003c\/a\u003e.\u003c\/p\u003e","brand":"weBoost","offers":[{"title":"1900MHz yagi antenna (311124)","offer_id":967453377,"sku":"311124","price":69.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/301124_gtw_0.jpeg?v=1478301805"},{"product_id":"wilson-yagi-antenna-314411","title":"Wilson Wide-Band Directional Antenna (314411, 314475)","description":"\u003cp\u003eThe Wilson Electronics Wide-Band Directional Antennas (314411, 314475) are 11.4 inch Yagi antennas with 8-10 dBi of gain that support frequencies of 700MHz - 2700MHz. They are wide-band antennas, ideally suited for use with any of the weBoost and Wilson building amplifiers.\u003c\/p\u003e\n\u003cp\u003eThe higher gain of this directional antenna would greatly improve the performance of these amplifiers compared to other antennas. The sealed housing is UV stabilized ABS plastic and is fully weather-proof.\u003c\/p\u003e\n\u003cp\u003eThese two antennas are an updated version of the previously models which used part numbers 304411 (50 ohm - N-Female Connector) and 304475 (75 ohm - F-Female Connector).\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Wilson Electronics Wide-Band Directional Antennas (314411, 314475) are a directional antenna. Directional antennas need to be pointed towards the nearest cell tower for the best results. As this is a multi-band antenna you will need to confirm that all of the towers for the networks you wish to improve are in the same direction.\u003c\/p\u003e\n\u003ch2\u003eMounting Details\u003c\/h2\u003e\n\u003cp\u003eBoth antenna options include mounting equipment to attach to a pole up to 2in in diameter. The pole is not included.\u003c\/p\u003e\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eThere are 2 different versions of this antenna, depending on which system you currently have. If you are unsure which antenna is best suited for your system please contact us and we can help.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 ohm - N-Female Connector (314411). \u003cstrong\u003eFor 50 ohm systems only\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e75 ohm - F-Female Connector (314475). \u003cstrong\u003eFor 75 ohm systems only\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"weBoost","offers":[{"title":"50 ohm - N-Female Connector (314411)","offer_id":967453477,"sku":"314411","price":89.99,"currency_code":"USD","in_stock":true},{"title":"75 ohm - F-Female Connector (314475)","offer_id":40170193911911,"sku":"314475","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/304411_1_9184695c-e58c-4845-bc94-8ffc9a3a2c98.jpg?v=1521058138"},{"product_id":"wilson-desktop-antenna-301211","title":"weBoost (Wilson) Desktop Antenna (301211)","description":"\u003cp\u003eThe weBoost (Wilson) Desktop Antenna (301211) is a wide-band antenna with 2.4 dB of gain. It is an indoor antenna, and can be used as either a receiving antenna, or as a broadcast antenna (see below).\u003c\/p\u003e\n\u003cp\u003eThe antenna is wide-band, and so is suitable for any of the amplifiers on our site. The antenna is made of black ABS plastic and is suitable for indoor use only. It comes with 5ft of RG174 cable, ending in an SMA-Male coaxial connector.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eBroadcast Antenna\u003c\/h2\u003e\n\u003cp\u003eThe weBoost Desktop Antenna can be used as a broadcast antenna, transmitting the boosted signal from one of our cell phone amplifiers. It is an omni-directional antenna, and so the antenna needs to be installed in a vertical position in the center of the area to cover.\u003c\/p\u003e\n\u003ch2\u003eMounting Details:\u003c\/h2\u003e\n\u003cp\u003eThe weBoost Desktop Antenna is a freestanding antenna, which is designed to be placed indoors, on a table or other flat surface. It has a built-in ground plane, so does not need to be placed on a metal surface.\u003c\/p\u003e\n\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":967453533,"sku":"301211","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/301211_weboost.png?v=1678743444"},{"product_id":"surecall-patch-antenna-sc-110w","title":"SureCall Patch Antenna (SC-110W)","description":"\u003cp\u003eThe SureCall Patch Antenna (SC-110W) is a convenient, lightweight directional antenna designed for inside vehicle use.\u003c\/p\u003e\n\u003cp\u003eThe wide-band antenna amplifies 2G-4G LTE cell signals with SureCall signal boosters. It provides 3 dBi of gain and is equipped with a 3 m (9 ft. 10 in.) cable.\u003c\/p\u003e\n\u003cp\u003eThe patch antenna can support multiple users within a vehicle, sitting in the front and rear seats. It comes with Velcro®backing strips for installation.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":1010795577,"sku":"SC-110W","price":10.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-110W.jpg?v=1481135376"},{"product_id":"galtronics-panel-antenna","title":"Galtronics PEAR S5490i  Directional, Multi-Band Panel Antenna","description":"\u003cp\u003eThe Galtronics PEAR S5490i panel antenna is a directional multi-band antenna. Directional antennas allow optimum coverage to targeted areas.\u003c\/p\u003e\n\u003cp\u003eThe antenna is suitable for \u003cstrong\u003eindoor or outdoor use\u003c\/strong\u003e in applications such as passive \u003ca title=\"Explanation of Distributed Antenna Systems (DAS)\" href=\"\/pages\/das-distributed-antenna-systems\" target=\"_blank\"\u003eDistributed Antenna Systems (DAS)\u003c\/a\u003e. It operates in the 698-960 MHz and 1710-2700 MHz frequency bands and it offers up to 6-7dB of gain.\u003c\/p\u003e\n\u003cp\u003eIt will operate in temperatures from -40° to 158°F (-40° to +70°C).\u003c\/p\u003e\n\u003cp\u003eThe PEAR S5490i is tested and \u003cstrong\u003eapproved for use in plenum space\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe S5490i is a \u003cstrong\u003elow-PIM antenna\u003c\/strong\u003e. PIM, or passive intermodulation, is form of distortion that occurs in devices like antennas as a result of nonlinearities in the system. It can be caused by dissimilar materials, design flaws, or corrosion by weather or age. PIM can cause significant disruption to system performance. The S5490i has been designed with all these factors in mind to minimise PIM.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe antenna comes with a mounting plate to attach to a wall. After affixing the mounting plate to the wall, mount the antenna onto the mounting plate by sliding it into the slots and securing it with the provided fasteners.\u003c\/p\u003e\n\u003cp\u003eThere is an optional swivel mounting bracket available if you need to focus the antenna in a particular direction.\u003c\/p\u003e\n\u003ctable width=\"439\" height=\"58\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMechanical Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40° to 158 °F (-40° to +70°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntenna Weight\u003c\/td\u003e\n\u003ctd\u003e1.3 lbs (600g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRadome Dimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e10.2\" x 8.0\" x 2.5\" (259 x 203 x 65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability rating\u003c\/td\u003e\n\u003ctd\u003eUL 94-V0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoHS\u003c\/td\u003e\n\u003ctd\u003ecompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003ePlenum Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproved for use in plenum space\u003c\/td\u003e\n\u003ctd\u003eListed \u0026amp; tested by Intertek \/ ETL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n","brand":"Galtronics","offers":[{"title":"Default Title","offer_id":5414493889,"sku":"02121261-05490","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/FrontViewPanel_WEB_1024x1024_43a67cfc-a496-441f-907f-74a448c04fbb.jpg?v=1476475522"},{"product_id":"surecall-desktop-antenna","title":"SureCall Desktop Antenna","description":"\u003cp\u003eThe SureCall 302W Desktop Antenna is an indoor omnidirectional antenna that boosts 2G\/3G\/4G\/LTE voice and data across all US and Canadian carriers.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: This is an antenna only, it needs to be used with a booster like the \u003ca href=\"https:\/\/www.waveform.com\/products\/surecall-ez-4g\"\u003eSureCall EZ-4G\u003c\/a\u003e to be fully functional.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a compact and easy to install antenna designed to sit unobtrusively and attractively on your desktop. It offers 3\/5 dB of gain and needs to be positioned at least 20 feet away from the amplifier unit for maximum coverage.\u003c\/p\u003e","brand":"SureCall","offers":[{"title":"Default Title","offer_id":14983880583,"sku":"SC-302W","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/sc302w.jpg?v=1474020989"},{"product_id":"antenna-add-on-kit","title":"Antenna Add-On Kit","description":"\u003cp\u003eThis is an add-on antenna kit. An extra antenna will expand coverage to areas where signal previously could not reach. It is an add-on kit designed to complement a full signal booster kit.\u003c\/p\u003e\n\u003cp\u003eThe kit contains three items - an extra indoor antenna, a 50' or 100' coaxial cable, and a 2-way splitter used to evenly split cellular signal to the extra antenna.\u003c\/p\u003e\n\u003ch2\u003eAntenna\u003c\/h2\u003e\n\u003cp\u003eThere are three add-on antenna options:\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/galtronics-indoor-ultra-flat-dome-antenna-low-pim-multi-band\" target=\"_blank\" title=\"Galtronics indoor ultra flat dome antenna \" rel=\"noopener noreferrer\"\u003eGaltronics PEAR S5606i\u003c\/a\u003e is an ultra flat omnidirectional antenna which boosts 2G\/3G\/4G\/LTE voice and data on all US and Canadian carriers. It is a low-PIM antenna and includes mounting hardware to be mounted to the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/surecall-cm222w\" title=\"SureCall SC-222W indoor omni dome antenna\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSureCall indoor dome antenna SC-222W\u003c\/a\u003e is a multi-band omni-directional plastic dome antenna that gathers signals from all sides. It provides 2-5dB gain and is designed for central locations with 360° coverage. It boosts 2G\/3G\/4G\/LTE voice and data on all US and Canadian carriers.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/wilson-wide-band-panel-antenna-311135-311155?variant=967453465\" title=\"Wilson weBoost 311135 indoor panel antenna\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eWilson\/weBoost 311135 wide band panel antenna\u003c\/a\u003e is a dual band antenna with 7 \/ 10 dB of gain. The antenna is made of ABS plastic and designed to attach to an interior wall. It can also be attached to the ceiling and broadcast downwards.\u003c\/p\u003e\n\u003ch2\u003eSplitter\u003c\/h2\u003e\n\u003cp\u003eThere are two splitter options:\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/microlab-signal-splitters-low-pim-reactive\" title=\"Microlab 2-way signal splitter\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMicrolab D2-J12 2-way signal splitter\u003c\/a\u003e is used to evenly split high power cellular signal with minimal reflections or loss. It is a low-PIM splitter with excellent input VSWR.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/surecall-signal-splitter?variant=857910169\" target=\"_blank\" title=\"SureCall 2-way signal splitter\" rel=\"noopener noreferrer\"\u003eSureCall 2-way signal splitter SC-WS-2\u003c\/a\u003e. This cable splitter is used to expand signal coverage for an additional antenna unit.\u003c\/p\u003e\n\u003ch2\u003eCoaxial Cable\u003c\/h2\u003e\n\u003cp\u003eCable comes in a choice of \u003cstrong\u003e50' or 100'\u003c\/strong\u003e. There are six cable options:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/lmr-400-coax?variant=996760309\" target=\"_blank\" title=\"Times Microwave LMR400 coaxial cable\" rel=\"noopener noreferrer\"\u003eTimes Microwave LMR 400\u003c\/a\u003e is a braided, low loss 50 ohm rated coaxial cable equipped with N Male connectors.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/lmr-400-coax?variant=996760309\" target=\"_blank\" title=\"Times Microwave Plenum Rated LMR 400 coaxial cable\" rel=\"noopener noreferrer\"\u003eTimes Microwave Plenum Rated LMR 400\u003c\/a\u003e is a braided, low loss 50 ohm rated coaxial cable equipped with N Male connectors. This is a highly fire retardant cable intended for installation runs within return air handling plenum spaces such as dropped ceilings and raised floors.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/times-microwave-lmr600-series-coaxial-cable\" target=\"_blank\" title=\"Times Microwave LMR 600 coaxial cable\" rel=\"noopener noreferrer\"\u003eTimes Microwave LMR 600\u003c\/a\u003e is a low loss RF coaxial cable with N Male connectors designed for 20-year outdoor service. Beneficial for long cable runs exceeding 100 ft requiring minimal signal loss. LMR 600 has approximately half the loss compared to the standard 400 Series coaxial cables.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/times-microwave-plenum-rated-1-2-lmr-600-series-coaxial-cable\" target=\"_blank\" title=\"Times Microwave Plenum Rated LMR 600 coaxial cable\" rel=\"noopener noreferrer\"\u003eTimes Microwave Plenum Rated LMR 600\u003c\/a\u003e is a low loss RF coaxial cable with N Male connectors designed for 20-year outdoor service. Beneficial for long cable runs exceeding 100 ft requiring minimal signal loss. LMR 600 has approximately half the loss compared to the standard 400 Series coaxial cables. This is a highly fire retardant cable intended for installation runs within return air handling plenum spaces such as dropped ceilings and raised floors.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/wilson400-coaxial-cable?variant=967454517\" target=\"_blank\" title=\"Wilson weBoost LMR 400 coaxial cable\" rel=\"noopener noreferrer\"\u003eWilson 400 Ultra Low Loss Coax Cable\u003c\/a\u003e is a 400 type cable with N Male connectors. This 50 ohm cable is light, flexible and weatherproof.\u003c\/p\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/surecall-cm400-ultra-low-loss-coaxial-cable?variant=996870093\" target=\"_blank\" title=\"SureCall SC400 coaxial cable\" rel=\"noopener noreferrer\"\u003eSureCall SC400 Ultra Low Loss Coax Cable\u003c\/a\u003e is a very low-loss 50 ohm cable with N Male connectors. The cable comes in black and is light, flexible and weatherproof. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Waveform","offers":[{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 - $80","offer_id":19818058567,"sku":"ADDONANT-GLTRN-MRLB2WAY-50LMR400","price":336.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100'Times Microwave LMR400- $135","offer_id":40170206462055,"sku":"ADDONANT-GLTRN-MRLB2WAY-100LMR400","price":391.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170206494823,"sku":"ADDONANT-GLTRN-MRLB2WAY-50LMR400PLNM","price":576.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170206527591,"sku":"ADDONANT-GLTRN-MRLB2WAY-100LMR400PLNM","price":866.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 - $135","offer_id":40170206560359,"sku":"ADDONANT-GLTRN-MRLB2WAY-50LMR600","price":391.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 - $230","offer_id":40170206593127,"sku":"ADDONANT-GLTRN-MRLB2WAY-100LMR600","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170206625895,"sku":"ADDONANT-GLTRN-MRLB2WAY-50LMR600PLNM","price":901.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170206658663,"sku":"ADDONANT-GLTRN-MRLB2WAY-100LMR600PLNM","price":1501.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170206691431,"sku":"ADDONANT-GLTRN-MRLB2WAY-50WLSN400","price":323.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170206724199,"sku":"ADDONANT-GLTRN-MRLB2WAY-100WLSN400","price":368.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 50' SureCall SC400 - $59","offer_id":40170206756967,"sku":"ADDONANT-GLTRN-MRLB2WAY-50SC400","price":315.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ Microlab 2-way splitter - $129 \/ 100' SureCall SC400 - $99","offer_id":40170206789735,"sku":"ADDONANT-GLTRN-MRLB2WAY-100SC400","price":355.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 - $80","offer_id":40170206822503,"sku":"ADDONANT-GLTRN-SC2WAY-50LMR400","price":276.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100'Times Microwave LMR400- $135","offer_id":40170206855271,"sku":"ADDONANT-GLTRN-SC2WAY-100LMR400","price":331.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170206888039,"sku":"ADDONANT-GLTRN-SC2WAY-50LMR400PLNM","price":516.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170206920807,"sku":"ADDONANT-GLTRN-SC2WAY-100LMR400PLNM","price":806.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 - $135","offer_id":40170206953575,"sku":"ADDONANT-GLTRN-SC2WAY-50LMR600","price":331.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 - $230","offer_id":40170206986343,"sku":"ADDONANT-GLTRN-SC2WAY-100LMR600","price":426.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170207019111,"sku":"ADDONANT-GLTRN-SC2WAY-50LMR600PLNM","price":841.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170207051879,"sku":"ADDONANT-GLTRN-SC2WAY-100LMR600PLNM","price":1441.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170207084647,"sku":"ADDONANT-GLTRN-SC2WAY-50WLSN400","price":263.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170207117415,"sku":"ADDONANT-GLTRN-SC2WAY-100WLSN400","price":308.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 50' SureCall SC400 - $59","offer_id":40170207150183,"sku":"ADDONANT-GLTRN-SC2WAY-50SC400","price":255.0,"currency_code":"USD","in_stock":true},{"title":"Galtronics PEAR S5606i - $127 \/ SureCall 2-way splitter - $69 \/ 100' SureCall SC400 - $99","offer_id":40170207182951,"sku":"ADDONANT-GLTRN-SC2WAY-100SC400","price":295.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 - $80","offer_id":40170207215719,"sku":"ADDONANT-SC222W-MRLB2WAY-50LMR400","price":258.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100'Times Microwave LMR400- $135","offer_id":40170207248487,"sku":"ADDONANT-SC222W-MRLB2WAY-100LMR400","price":313.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170207281255,"sku":"ADDONANT-SC222W-MRLB2WAY-50LMR400PLNM","price":498.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170207314023,"sku":"ADDONANT-SC222W-MRLB2WAY-100LMR400PLNM","price":788.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 - $135","offer_id":40170207346791,"sku":"ADDONANT-SC222W-MRLB2WAY-50LMR600","price":313.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 - $230","offer_id":40170207379559,"sku":"ADDONANT-SC222W-MRLB2WAY-100LMR600","price":408.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170207412327,"sku":"ADDONANT-SC222W-MRLB2WAY-50LMR600PLNM","price":823.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170207445095,"sku":"ADDONANT-SC222W-MRLB2WAY-100LMR600PLNM","price":1423.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170207477863,"sku":"ADDONANT-SC222W-MRLB2WAY-50WLSN400","price":245.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170207510631,"sku":"ADDONANT-SC222W-MRLB2WAY-100WLSN400","price":290.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 50' SureCall SC400 - $59","offer_id":40170207543399,"sku":"ADDONANT-SC222W-MRLB2WAY-50SC400","price":237.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ Microlab 2-way splitter - $129 \/ 100' SureCall SC400 - $99","offer_id":40170207576167,"sku":"ADDONANT-SC222W-MRLB2WAY-100SC400","price":277.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 - $80","offer_id":40170207608935,"sku":"ADDONANT-SC222W-SC2WAY-50LMR400","price":198.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100'Times Microwave LMR400- $135","offer_id":40170207641703,"sku":"ADDONANT-SC222W-SC2WAY-100LMR400","price":253.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170207674471,"sku":"ADDONANT-SC222W-SC2WAY-50LMR400PLNM","price":438.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170207707239,"sku":"ADDONANT-SC222W-SC2WAY-100LMR400PLNM","price":728.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 - $135","offer_id":40170207740007,"sku":"ADDONANT-SC222W-SC2WAY-50LMR600","price":253.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 - $230","offer_id":40170207772775,"sku":"ADDONANT-SC222W-SC2WAY-100LMR600","price":348.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170207805543,"sku":"ADDONANT-SC222W-SC2WAY-50LMR600PLNM","price":763.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170207838311,"sku":"ADDONANT-SC222W-SC2WAY-100LMR600PLNM","price":1363.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170207871079,"sku":"ADDONANT-SC222W-SC2WAY-50WLSN400","price":185.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170207903847,"sku":"ADDONANT-SC222W-SC2WAY-100WLSN400","price":230.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 50' SureCall SC400 - $59","offer_id":40170207936615,"sku":"ADDONANT-SC222W-SC2WAY-50SC400","price":177.0,"currency_code":"USD","in_stock":true},{"title":"SureCall SC-222W - $49 \/ SureCall 2-way splitter - $69 \/ 100' SureCall SC400 - $99","offer_id":40170207969383,"sku":"ADDONANT-SC222W-SC2WAY-100SC400","price":217.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 - $80","offer_id":40170208002151,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50LMR400","price":279.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100'Times Microwave LMR400- $135","offer_id":40170208034919,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100LMR400","price":334.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170208067687,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50LMR400PLNM","price":519.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170208100455,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100LMR400PLNM","price":809.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 - $135","offer_id":40170208133223,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50LMR600","price":334.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 - $230","offer_id":40170208165991,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100LMR600","price":429.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170208198759,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50LMR600PLNM","price":844.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170208231527,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100LMR600PLNM","price":1444.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170208264295,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50WLSN400","price":266.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170208297063,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100WLSN400","price":311.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 50' SureCall SC400 - $59","offer_id":40170208329831,"sku":"ADDONANT-WLSN311135-MRLB2WAY-50SC400","price":258.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ Microlab 2-way splitter - $129 \/ 100' SureCall SC400 - $99","offer_id":40170208362599,"sku":"ADDONANT-WLSN311135-MRLB2WAY-100SC400","price":298.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 - $80","offer_id":40170208395367,"sku":"ADDONANT-WLSN311135-SC2WAY-50LMR400","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100'Times Microwave LMR400- $135","offer_id":40170208428135,"sku":"ADDONANT-WLSN311135-SC2WAY-100LMR400","price":274.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR400 Plenum Rated - $320","offer_id":40170208460903,"sku":"ADDONANT-WLSN311135-SC2WAY-50LMR400PLNM","price":459.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR400 Plenum Rated - $610","offer_id":40170208493671,"sku":"ADDONANT-WLSN311135-SC2WAY-100LMR400PLNM","price":749.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 - $135","offer_id":40170208526439,"sku":"ADDONANT-WLSN311135-SC2WAY-50LMR600","price":274.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 - $230","offer_id":40170208559207,"sku":"ADDONANT-WLSN311135-SC2WAY-100LMR600","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' Times Microwave LMR600 Plenum Rated - $645","offer_id":40170208591975,"sku":"ADDONANT-WLSN311135-SC2WAY-50LMR600PLNM","price":784.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100' Times Microwave LMR600 Plenum Rated - $1245","offer_id":40170208624743,"sku":"ADDONANT-WLSN311135-SC2WAY-100LMR600PLNM","price":1384.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' Wilson\/weBoost 400 - $67","offer_id":40170208657511,"sku":"ADDONANT-WLSN311135-SC2WAY-50WLSN400","price":206.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100' Wilson\/weBoost 400 - $112","offer_id":40170208690279,"sku":"ADDONANT-WLSN311135-SC2WAY-100WLSN400","price":251.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 50' SureCall SC400 - $59","offer_id":40170208723047,"sku":"ADDONANT-WLSN311135-SC2WAY-50SC400","price":198.0,"currency_code":"USD","in_stock":true},{"title":"Wilson\/weBoost 311135 panel antenna - $70 \/ SureCall 2-way splitter - $69 \/ 100' SureCall SC400 - $99","offer_id":40170208755815,"sku":"ADDONANT-WLSN311135-SC2WAY-100SC400","price":238.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Galtronics_S5606i_WEB_1024x1024_1024x1024_98133870-89c2-4e0c-a9f5-2b670af833f9.jpg?v=1476736395"},{"product_id":"surecall-sc-289w-omni-antenna","title":"SureCall 75 Ohm Omni-Directional Outdoor Antenna (SC-289W)","description":"\u003cp\u003eThe SureCall 75 Ohm Omni-Directional Outdoor Antenna (SC-289W) is designed for wall or roof mounting. It covers 2G\/3G\/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies, providing 3-4 dBi gain.\u003c\/p\u003e\n\u003cp\u003eThis is a 75 ohm antenna suitable for use with 75 ohm signal booster kits like the \u003ca href=\"\/products\/surecall-fusion4home\" title=\"SureCall Fusion4Home signal booster kit\" target=\"_blank\"\u003eSureCall Fusion4Home\u003c\/a\u003e. A 50 ohm version is also available, the \u003ca href=\"\/products\/surecall-cm288w\" title=\"SureCall SC-288W 50 ohm outdoor omnidirectional antenna\" target=\"_blank\"\u003eSureCall 50 Ohm Omni-Directional Antenna (SC-288W)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis omni-directional fiberglass antenna gathers signals from all sides and does not need to be pointed toward a cellular tower. Omni-directional antennas receive and send signals in a 360º radius.\u003c\/p\u003e\n\u003cp\u003eThey can receive signals from multiple cell towers and are best for boosting signal on many different carriers. They are excellent in most situations where the existing outside signal strength is moderate to strong.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe SC-289W is ideal for buildings, RVs or marine installations. Includes mounting equipment for either a flat horizontal surface or a wall. For best results, mount the unit in an upright position.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":25881234695,"sku":"SC-289W","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-289W.jpg?v=1486591238"},{"product_id":"surecall-sc-231w-yagi-antenna","title":"SureCall 75 Ohm Yagi Outdoor Antenna (SC-231W)","description":"\u003cp\u003eThe SureCall Yagi Outdoor Antenna (SC-231W) is a directional antenna with up to 10 dBi of gain across all wireless frequencies (Voice\/3G\/4G\/AWS\/WLAN). The SC-231W antenna measures 19.1 x 8.8 x 3.4 inches (l x w x h). It's very powerful at picking up weak signal in one particular direction. \u003c\/p\u003e\n\u003cp\u003eThis is a 75 ohm antenna, for use with 75 ohm signal booster kits like the SureCall \u003ca href=\"\/products\/surecall-fusion4home\" title=\"SureCall Fusion4Home signal booster kit\" target=\"_blank\"\u003eFusion4Home\u003c\/a\u003e. A 50 ohm version, the \u003ca href=\"\/products\/surecall-cm230-w\" title=\"SureCall 50 Ohm Yagi Outdoor Antenna (SC-230W)\" target=\"_blank\"\u003eSureCall 50 Ohm Yagi Outdoor Antenna (SC-230W)\u003c\/a\u003e, is also available.\u003c\/p\u003e\n\u003cp\u003eIt needs to be set up pointing in the direction of the cell tower, and because it is directional it will only pick up signal in that direction. We recommend it for situations where existing outside signal is weak, and you only want to boost coverage for one carrier (or if more than one carrier has a cell tower in that direction). \u003cbr\u003e\u003cbr\u003eIf you need to boost signal coming from different directions, it is possible to set up more than one yagi antenna. \u003ca href=\"\/pages\/contact-us\" title=\"RepeaterStore Contact Us page\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for more help with this.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eDirectional antennas must be mounted horizontally and be aimed at the desired cellular tower for best results. Any metallic rods must be at least three feet from the antenna. The antenna comes with mounting equipment to attach to a 1 to 2 inch diameter pole (not included, \u003ca href=\"\/products\/surecall-j-bar-cellular-antenna-mount\" title=\"SureCall J-pipe mount\" target=\"_blank\"\u003eavailable separately\u003c\/a\u003e). \u003cbr\u003e\u003cbr\u003eFor best results, the white fiberglass portion of the antenna should be mounted above the roof line and unobstructed in the direction of the tower.\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":25882958727,"sku":"SC-231W","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Yagi_on-a-mast_1024x1024_574b6aa1-68de-4b05-9937-a4ee8edf09f4.jpg?v=1522874964"},{"product_id":"pulse-larsen-clarity-ultra-thin-white-ceiling-mount-omni-antenna","title":"Pulse\/Larsen Clarity Ultra-Thin White Ceiling Mount Omni Antenna","description":"\n\u003cp\u003eThe Pulse\/Larsen Clarity Low Profile Series is a series of industry leading -155 dBc certified low PIM Distributed Antenna System (DAS) ceiling mount antennas. These ultra thin antennas boost signal on 2G, 3G and 4G LTE bands.\u003c\/p\u003e\n\u003cp\u003eThe Clarity series are \u003cstrong\u003eceiling-mount omnidirectional antennas\u003c\/strong\u003e. Omnidirectional antennas broadcast and receive signals from all sides.\u003c\/p\u003e\n\u003cp\u003eThe Clarity series is part of Pulse Electronics' \u003cstrong\u003ePIMinator\u003c\/strong\u003e™ series. PIM, or passive intermodulation, is form of distortion that occurs in devices like antennas as a result of nonlinearities in the system. It can be caused by dissimilar materials, design flaws, or corrosion by weather or age. PIM can cause significant disruption to system performance. The results of PIM in a network are more dropped calls, lower data rates, less capacity, high noise floor in the receive band, failed connect attempts, and premature handoffs. Low PIM antennas are key to system performance for both outdoor and indoor cellular networks.\u003c\/p\u003e\n\u003cp\u003eThe Clarity omni antenna is \u003cstrong\u003eultra-thin\u003c\/strong\u003e. It's ideal for luxury installations where attractive, unobtrusive design is paramount. The antenna has a low profile white design. It is also available as a \u003ca href=\"\/products\/pulse-larsen-clarity-ultra-thin-ceiling-mount-omni-antenna\" target=\"_blank\" title=\"Pulse \/ Larsen Clarity low profile ceiling mount antenna in clear \/ translucent\" rel=\"noopener noreferrer\"\u003eclear (translucent)\u003c\/a\u003e option. \u003c\/p\u003e\n\u003ch2\u003eEnergy Directive Reflector\u003c\/h2\u003e\n\u003cp\u003eThis antenna is available with and without an above-ceiling energy directive antenna reflector. The reflector is made of aluminum and enhances antenna gain.\u003c\/p\u003e","brand":"Pulse\/Larsen","offers":[{"title":"No Reflector","offer_id":26026165319,"sku":"DASUTWC500NF","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Energy Directive Reflector (+$36)","offer_id":40170225696871,"sku":"DASUTWCR500NF","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Pulse_Electronics_-_White_Front_Angle_Side_View_A_1024x1024_1024x1024_7e6ead1b-f89a-45cc-9d5b-626fcb7ed8a7.jpg?v=1480681074"},{"product_id":"wilson-wideband-outdoor-omni-antenna-304422","title":"weBoost (Wilson) Omni Plus Building Antenna (304422)","description":"\u003cp\u003eThe weBoost (Wilson) Wideband Omni Plus Building Antenna (304422) is a convenient and durable exterior antenna for residential outdoor installation.\u003c\/p\u003e\n\u003cp\u003eThe antenna is a wide band 50 ohm antenna with 2-5 dBi of gain and an N-Female connector. It is ideally suited for use with any 50 Ohm wide band amplifier on our site. The antenna is made of UV resistant PVC, and is fully weatherproof.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe  Omni Plus Building Antenna (304422) is an omni-directional antenna. Omni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.\u003c\/p\u003e\n\u003ch2\u003eMounting Details\u003c\/h2\u003e\n\u003cp\u003eThe  Omni Plus Building Antenna (304422) includes it's mounting hardware, the  Multi-Mount kit. This Multi-Mount kit contains a L-bracket for mast or wall use and two U-bolt \u0026amp; clamp assemblies for use with 1.5-2 inch (38 - 52 mm) masts. Pole mast is not included.\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n Omni Plus Building Antenna (304422)\n\u003c\/li\u003e\n\u003cli\u003eMulti-Mount Kit (L-Bracket, 2x U-Bolt \u0026amp; Clamp Assemblies)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":27901149255,"sku":"304422","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/4G_Omni_Enterprise_-_304422_1024x1024_9bae16af-5f2a-4c90-8c6f-726d9765e570.jpg?v=1523479942"},{"product_id":"cel-fi-mimo-panel-antenna","title":"Cel-Fi MIMO Panel Antenna","description":"\n\u003cp\u003eThe Cel-Fi MIMO Panel Antenna is a dual-polarization LTE MIMO antenna for wall, ceiling, or pole mount installations. It offers up to 6.5 - 9 dBi of gain. The Cel-Fi MIMO Panel Antenna is required for off-air installation of multiple \u003ca href=\"https:\/\/www.waveform.com\/products\/cel-fi-quatra-coverage-unit\"\u003eCel-Fi QUATRA 1000 Coverage Units\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe antenna connects to any MIMO-enabled Network Unit or Coverage Unit with QMA (quick connect) cables. \u003cbr\u003e\u003cbr\u003eThe 8-position dial base allows the antenna to be rotated in 45-degree increments for best performance, managed with real-time data from the Cel-Fi WAVE Platform Antenna Position Test.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":41248980810,"sku":"A52-x12-100","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/3D_Antenna-MIMO_7aa27f51-fa6c-4008-9634-49c3bc00d831.jpg?v=1493923544"},{"product_id":"pctel-gpsl1-tmg-spi-40ncb-gps-timing-antenna-40db-amplifier","title":"GPS Timing Antenna with Lightning Protection, 40dB Amplifier, 1.565-1.585 GHz","description":"\u003cp\u003eThe PCTEL GPS timing reference antenna is specifically designed for durable and reliable deployment in congested cell-site applications. It is a right-hand circularly polarized antenna that incorporates a 40 dB low noise amplifier.\u003cbr\u003e\u003cbr\u003eThe antenna is ideal for systems with signal loss from long cable runs. The 40 dB high gain amplifier is designed to address these attenuation issues. PCTEL's proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than a traditional patch antenna.\u003cbr\u003e\u003cbr\u003eThe GPSL1-TMG-SPI-40NCB's unique radome shape sheds water and ice and prevents bird perching. The antenna also features ESD, reverse polarity protection, and transit voltage suppression.\u003cbr\u003e\u003cbr\u003eCritically, the GPSL1-TMG-SPI-40N also provides integrated lightning protection. This removes the need for downstream, in-line surge suppressors.\u003cbr\u003e\u003cbr\u003eThis antenna does not include a mount. PCTEL's \u003ca href=\"https:\/\/www.waveform.com\/products\/mount-kit-for-gps-timing-antenna-medium-duty\"\u003eGPS-TMG-MMD Mount Kit\u003c\/a\u003e is the recommended mount and is sold separately.\u003cbr\u003e\u003c\/p\u003e","brand":"PCTEL","offers":[{"title":"Default Title","offer_id":42347972106,"sku":"GPSL1-TMG-SPI-40N","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/GPSL1-TMG-SPI-40NCB-1.jpg?v=1540405366"},{"product_id":"weboost-4g-marine-antenna","title":"weBoost (Wilson) Wide-Band Omni Marine Antenna (304420)","description":"\u003cp\u003eThe weBoost (Wilson) Wide-Band Omni Marine Antenna (304420) is a wideband antenna designed to be used as an outside antenna for boats.\u003c\/p\u003e\n\u003cp\u003eThe antenna is made of stainless steel and fiberglass. It is weather proof and salt-water resistant. It comes with 20ft of RG-58 cable attached and has an SMA-Male connector.\u003c\/p\u003e\n\u003cp\u003eThis marine grade antenna is omni-directional. It is designed to be mounted to the \u003ca href=\"https:\/\/www.waveform.com\/products\/wilson-marine-antenna-mount-901119\"\u003eweBoost (Wilson) Marine Antenna Mount (901119)\u003c\/a\u003e.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":46213454922,"sku":"304420","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/304420---4G-Marine-Antenna_400x400_large_c0024570-441a-4e43-867b-3ca1b1aa532d.jpg?v=1501791042"},{"product_id":"wilson-4g-low-profile-dome-antenna-with-reflector-314406-and-314407","title":"weBoost (Wilson) Low Profile Dome Antenna (314406, 314407)","description":"\u003cp\u003eThe weBoost (Wilson) Low Profile Dome Antenna (314406, 314407) is an ultra thin 50 ohm wideband indoor antenna. It is offered as either bundle with an above-ceiling reflector (314406) or as a standalone antenna (314407). \u003c\/p\u003e\n\u003cp\u003eWith the reflector, the weBoost (Wilson) Low Profile Dome Antenna offers a peak gain of 5-7 dBi. Without the reflector, the antenna offers 4-6 dBi of gain. \u003c\/p\u003e\n\u003cp\u003eThe antenna is made of white radome and it designed for discreet installations where antenna appearance and unobtrusiveness is a priority.\u003c\/p\u003e\n\u003cp\u003eIt has N-Female connectors and comes with 10 inch plenum rated pigtail cable attached.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Include Reflector (314406)","offer_id":2432894828573,"sku":"314406","price":179.99,"currency_code":"USD","in_stock":true},{"title":"No Reflector - Antenna Only (314407)","offer_id":40170189553767,"sku":"314407","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Kit_Assembled_FL.jpg?v=1519243395"},{"product_id":"surecall-sc-121w-wideband-indoor-whip-antenna","title":"SureCall Wideband Indoor Whip Antenna (SC-123W)","description":"\n\u003cp\u003eThe SureCall Wideband Indoor Whip Antenna (SC-123W) is a 50 Ohm wideband right-angle indoor whip antenna with 2-5 dBi of gain.\u003c\/p\u003e\n\u003cp\u003eIt is an omni-directional antenna that connects directly to the amplifier unit and has an N-Male connector.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: This antenna used to previously have part number SC-121W, but it was changed to SC-123W in August 2018.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":2883199434781,"sku":"SC-123W","price":10.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-121W_web-min.jpg?v=1508359005"},{"product_id":"cel-fi-wideband-omni-directional-mimo-antenna","title":"Cel-Fi Wideband Omni-Directional MIMO Antenna","description":"\u003cp\u003eThe Cel-Fi Wideband Omni-Directional MIMO Antenna is perfect for use as an outdoor cellular donor signal source for the QUATRA 2000 system. \u003c\/p\u003e\n\u003cp\u003eThe antenna has 2.5 to 5 dBi of gain. It comes with 2 x 6.5 foot lengths of cable attached with two N-type female connectors.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":5700334747677,"sku":"A11-V14-100","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/OmniAntenna.jpg?v=1519240103"},{"product_id":"wilson-electronics-4g-dome-ceiling-antenna-75-ohm-304419","title":"Wilson 75 Ohm Ceiling Mounted Dome Antenna (304419)","description":"\u003cp\u003eThe Wilson Electronics Indoor Ceiling Mounted Dome Antenna (304419) is an omni-directional wideband antenna that can provide up to 5.1 dBi of gain for 698-960MHz and 1710-2700 MHz. The antenna has 12 inch RG6 cable attached with an F-Female connector. \u003c\/p\u003e\n\u003cp\u003eOmni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.\u003c\/p\u003e\n\n\u003cp\u003eIt is a 75 ohm antenna that will rebroadcast boosted signal for every major cell carrier in the US and Canada. The antenna measures 7.3 x 3.3 inches and is made of white ABS plastic and is suitable for indoor use only.\u003c\/p\u003e\n\u003ch2\u003eMounting Details\u003c\/h2\u003e\n\u003cp\u003eThe antenna mounts to a ceiling using the included mounting hardware. The mounting hardware could be used to mount the antenna to a wall, but this isn't advised.\u003c\/p\u003e\n\n\n","brand":"Wilson","offers":[{"title":"Default Title","offer_id":5809998528541,"sku":"304419","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/304419_x500_e61e4b1a-28a9-4557-9926-f4a3f175f9da.jpg?v=1521663616"},{"product_id":"cel-fi-marine-antenna","title":"Cel-Fi Marine Antenna","description":"\n\u003cp\u003eThe Cel-Fi Marine Antenna is a high-performance wideband antenna designed to be used as an outside antenna for boats.\u003c\/p\u003e\n\u003cp\u003eThis marine-grade antenna is omni-directional and offers up to 4 dBi of gain. Includes 20 feet of RG58 coax with an SMA-Male connector.\u003c\/p\u003e\n\u003cp\u003eThe antenna collects the cell tower signal and sends it through the cable to the signal booster. The antenna is weather resistant with a threaded ferrule\/post for side or bottom cable exit. It measures 2.5 inch x 9.8 inch.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":5846764224541,"sku":"A11-V37-100","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/photo_Antenna-Marine.jpg?v=1520898176"},{"product_id":"cel-fi-wideband-panel-antenna","title":"Cel-Fi Wideband Panel Antenna","description":"\u003cp\u003eThe Cel-Fi Wideband Panel Antenna (A52-V32-100) is a directional antenna suitable for both indoor and outdoor use and offers up to 6.5 - 9.0 dBi of gain.\u003c\/p\u003e\n\u003cp\u003ePanel antennas allow optimum reception to targeted areas. As a directional antenna, outside it needs to be set up pointing in the direction of the cell tower. Placement is made simple with the Cel-Fi WAVE Antenna positioning app.\u003c\/p\u003e\n\u003cp\u003eIf used indoors, the Wideband Panel Antenna can be mounted to either the wall or ceiling. The unit includes a standard wall mount.\u003c\/p\u003e\n\u003cp\u003eThe antenna is weather resistant and built with UV stabilized ABS plastic. It has a SMA-Male connector and 6.5 ft (2m) coaxial cable attached.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":6018394587165,"sku":"591NA52280A06V32","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/3D_Antenna-Panel-600x784.jpg?v=1522786855"},{"product_id":"rsrf-dome-antenna","title":"Dome Antenna with N-Female Connector, 600 - 6000 MHz","description":"\u003cp\u003eThe Waveform Dome Antenna is a wideband omni-directional ceiling antenna. It offers 3.0 - 5.5 dBi of gain and covers frequencies from 600 MHz up to 6000 MHz. \u003cbr\u003e\u003cbr\u003eFurther testing revealed this antenna provides an impressive gain of up to 5.0 dBi all the way to 6000 MHz, exceeding it's original specification of up to only 2700 MHz! \u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003eOmni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm antenna that will rebroadcast boosted signal for every major cell network in the US and Canada. The antenna is made of white UV-protected ABS plastic and is suitable for indoor use only.\u003c\/p\u003e\n\u003cp\u003eThe antenna has N-Female connectors. \u003c\/p\u003e\n\n\u003cp\u003eThe antenna needs to be mounted to the ceiling for best results and you will need to run a cable to the back of the ceiling. Ceiling mount equipment is included.  You will need to drill a hole of 35mm in the ceiling and screw the fixing nut to fasten the antenna on the ceiling. The ceiling's thickness should be no more than 20mm \/ 0.78 inches.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":8183009050727,"sku":"ANT627NF-DOME","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00246.jpg?v=1539190434"},{"product_id":"rsrf-panel-antenna","title":"Panel Antenna with N-Female Connector, 600 - 6000 MHz","description":"\u003cp\u003eThe Waveform Panel Antenna is a high gain wideband directional antenna for indoor use. It offers up to 7 - 8 dBi of gain across all wireless frequencies (Voice\/3G\/4G\/AWS\/WLAN).\u003c\/p\u003e\n\u003cp\u003eThe antenna is made of white ABS plastic. It has 30mm attached cable with N-Female connectors.  \u003c\/p\u003e\n\u003cp\u003ePanel antennas allow optimum reception to targeted areas. A wall mounted antenna projects signal in front of it, and so should be placed facing the area where you wish to increase signal.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":8183077044327,"sku":"ANT627NF-PANEL7","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00280.jpg?v=1529189043"},{"product_id":"cel-fi-lpda-antenna","title":"Cel-Fi LPDA Antenna","description":"\u003cp\u003eThe Cel-Fi LPDA Antenna is a wideband directional antenna offering 12-14 dBi of gain across all North American cellular frequencies.\u003c\/p\u003e\n\u003cp\u003eA log-periodic dipole array (LPDA) antenna is a powerful directional antenna. It's very powerful at picking up weak signal in one particular direction and it needs to be set up pointing in the direction of the cell tower. The LPDA antenna reduces signal noise, improving SINR and overall signal quality.\u003c\/p\u003e\n\u003ch2\u003eWhat is an LPDA Antenna?\u003c\/h2\u003e\n\u003cp\u003eA log-periodic dipole array (LPDA) antenna is a type of directional antenna. Some other manufacturers call these antennas \"yagi\" antennas, although technically yagi and LPDA antennas are slightly different.\u003c\/p\u003e\n\u003cp\u003eDirectional antennas need to be focused at the nearest cell tower. They are very powerful at picking up signal in one narrow direction. They are formed of a long central \"boom\" with attached metal rods called \"dipole elements\". The frequencies the antenna picks up depends on the length of the dipole elements.\u003c\/p\u003e\n\u003cp\u003eA \"yagi\" antenna has dipole elements all of the same size. This means that it will only transmit and receive signals on a very narrow frequency range. Since modern cell networks use a very wide range of frequencies, this means that yagi antennas are usually only suitable for certain public safety situations, or when only one specific network needs to be boosted.\u003c\/p\u003e\n\u003cp\u003eMost directional antennas on this site are log-periodic dipole array antennas. LPDA antennas have a wide range of dipole elements. The elements are spaced at intervals following a logarithmic function of the frequency, known as Σ or sigma. The different length of the dipole elements means that LPDA antennas transmit and receive signals on a wide range of cellular frequencies. The elements taper into a triangle shape (as seen in the image of the Cel-Fi LPDA antenna on this page). The relationship between the lengths is a function known as tau. They are wideband directional antennas that will boost signal on most North American cell carriers and so are well-suited to most cellular booster installations.\u003c\/p\u003e\n\u003cp\u003eThe Cel-Fi LPDA antenna leaves the central boom and dipole arrays uncovered, but some other kinds of LPDA antennas have ABS plastic coverings.\u003c\/p\u003e\n\u003ch2\u003eWhy Use an LPDA Antenna?\u003c\/h2\u003e\n\u003cp\u003eLPDA antennas are ideal for use in situations with low SINR. SINR, or Signal to Interference Plus Noise Ratio, is a measure of an LTE signal's quality. Clear signal has a SINR of over 10 dB, while low quality signal has a SINR of under 5 dB. SINR and signal quality is different to RSRP, or signal strength. RSRP measures signal strength and is boosted by a cellular repeater system's gain. Strong signal power is important for good coverage but despite the importance attached to dB and signal strength bars, low SINR is just as important for clear calls and reliable coverage.\u003c\/p\u003e\n\u003cp\u003eLow SINR results in low throughput, poor sensitivity, poor sound quality, and a generally bad user experience. Managing SINR is vital to a good cellular booster design. High signal power (gain) is not enough to boost signal as signal quality will be poor if the noise level is too high.\u003c\/p\u003e\n\u003cp\u003eA directional LPDA antenna is a great choice if signal quality is strong but noisy (low SINR). Noisy donor signal is usually caused by inter-cell interference from multiple nearby cell towers using the same frequencies. Focussing and amplifying just one of the cell towers will reduce noise and improve signal quality.\u003c\/p\u003e\n\u003ch2\u003eMounting\u003c\/h2\u003e\n\u003cp\u003eThe antenna can be mounted to a flat surface or to a pole. It features a mast down-tilt bracket and U-Bolts. The antenna is designed to be mounted at a 45° tilt. It comes with a specially designed mount attachment that enables the antenna to be mounted at a tilt, for optimal matching of macro donor signals. Macro antennas are cross-polarized and Cel-Fi have found considerably better results in the field when tilting the LPDA antenna 45° to match the cross-polarized donor signal.\u003c\/p\u003e\n\u003cp\u003eIdeally the antenna should be pole-mounted at a tilt and aimed to the nearest cell tower. Although it can be a little time-consuming, finding the right antenna location and directionwill greatly improve booster system performance. Cel-Fi products, including the Quatra and GO X, are make aiming a directional antenna as easy as possible. The devices will give you a signal reading that includes both RSRP (signal strength) and SINR (signal quality), on the WAVE app, making it easier to try different antenna locations and directions and find the best signal.\u003c\/p\u003e\n\u003cp\u003eThe antenna includes a 10 inch (32') RG58 pigtail with an N-type Female connector. It is compatible with all N-Female booster kits on our site.\u003c\/p\u003e","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":12856338743399,"sku":"A62-V44-100","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/image_2.jpg?v=1539768450"},{"product_id":"cel-fi-whip-antenna","title":"Cel-Fi Whip Antenna","description":"\n\u003cp\u003eThe Cel-Fi Whip Antenna is a wideband antenna with 3-5 dBi of gain. It is an indoor antenna is designed to attach directly to the amplifier unit and broadcast the boosted cellular signal. \u003c\/p\u003e\n\u003cp\u003eThe whip antenna has an SMA Male connector. It has a paddle or blade style dipole that measures 172mm (6.7\") and a right-angle pivoting knuckle joint.\u003c\/p\u003e\n\u003cp\u003eThe Cel-Fi Whip Antenna is compatible with the \u003ca href=\"\/products\/cel-fi-go-x\" target=\"_blank\" title=\"Cel-Fi GO X signal booster\" rel=\"noopener noreferrer\"\u003eCel-Fi GO\u003c\/a\u003e, \u003ca href=\"\/products\/cel-fi-pro-for-at-t\" target=\"_blank\" title=\"Cel-Fi PRO for AT\u0026amp;T signal booster system\" rel=\"noopener noreferrer\"\u003ePRO\u003c\/a\u003e, or \u003ca href=\"\/products\/cel-fi-duo-for-t-mobile\" target=\"_blank\" title=\"Cel-Fi DUO for T-Mobile\" rel=\"noopener noreferrer\"\u003eDUO\u003c\/a\u003e.\u003c\/p\u003e","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":15842540781671,"sku":"A21-V33-100","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/whipantenna.jpg?v=1544131402"},{"product_id":"weboost-4g-slim-low-profile-antenna-314401","title":"weBoost Slim Low-Profile Antenna (314401)","description":"\u003cp\u003eThe weBoost Slim Low-Profile Antenna (314401) is a mobile antenna designed for use inside cars and trucks.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm wideband antenna with up to 5 dBi of gain. It measures at 3.2 x 1.4 x 0.5 inches and has an attached 10 ft LMR100 cable with an SMA-Male connector.\u003c\/p\u003e\n\u003cp\u003eIt has a simple, compact design which makes installation very straightforward. The antenna can be placed vertically or horizontally.\u003c\/p\u003e\n\u003cp\u003eThe Slim Low Profile Antenna (314401) will work with any weBoost multi-user vehicle boosters, including the weBoost Drive 4G-X, Drive 4G-X Fleet, Drive 4G-X OTR, and Drive 4G-M. \u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":19512146559079,"sku":"314401","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/314401-ISO.jpg?v=1547675172"},{"product_id":"rsrf-4-3-10-dome-antenna","title":"Dome Antenna with 4.3-10-Female Connector, 698 - 2700 MHz","description":"\n\u003cp\u003eThe Waveform 4.3-10 Dome Antenna is a wideband omni-directional ceiling antenna. It offers 3 - 5 dBi of gain.\u003c\/p\u003e\n\u003cp\u003eOmni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal.\u003c\/p\u003e\n\u003cp\u003eThe antenna has 4.3-10-Female low PIM connectors.\u003c\/p\u003e\n\u003cp\u003eKey specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.3-10-Female 50 Ohm Mini-DIN connector\u003c\/li\u003e\n\u003cli\u003e\nFreq. Supported: 600 - 2700 MHz\u003c\/li\u003e\n\u003cli\u003e-153 dBc low PIM\u003c\/li\u003e\n\u003cli\u003e3 - 5 dBi gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":19879508410471,"sku":"ANT727-4310-DOME-LP","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/4310dome.jpg?v=1557946951"},{"product_id":"rsrf-4-3-10-panel-antenna","title":"Panel Antenna with 4.3-10-Female Connector, 698 - 2700 MHz","description":"\n\u003cp\u003eThe Waveform 4.3-10 Panel Antenna is a high gain wideband directional antenna for indoor use. It offers up to 5-8 dBi of gain across all wireless frequencies (Voice\/3G\/4G\/AWS\/WLAN).\u003c\/p\u003e\n\n\u003cp\u003ePanel antennas allow optimum reception to targeted areas. A wall mounted antenna projects signal in front of it, and so should be placed facing the area where you wish to increase signal.\u003c\/p\u003e\n\u003cp\u003eThe antenna is made of white ABS plastic. It has 4.3-10 Female low PIM connectors. It has a 120mm pigtail antenna attached.\u003c\/p\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":19879682801767,"sku":"ANT727-4310-PANEL7-LP","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/4310femalepanel.jpg?v=1557946922"},{"product_id":"wideband-parabolic-grid-antenna","title":"Griddy: The Grid Parabolic Antenna, 600 - 6500 MHz","description":"\u003cp\u003eGriddy is an ultra-wideband parabolic grid antenna that's ready to help you get the most out of your LTE modem, booster, or WiFi device!\u003c\/p\u003e\n\u003cp\u003eHave line of sight to your nearest cell tower or a distant WiFi access point? Great! Simply aim Griddy in that exact direction, and you're all set!\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eHigh Gain and Highly Directional\u003c\/h2\u003e\n\u003cp\u003eGriddy adds up to 26 dBi of gain to your wireless connection, making weak signals considerably stronger and clearer\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12-17 dBi at 600-960 MHz\u003c\/li\u003e\n\u003cli\u003e20-23 dBi at 1700-2700 MHz \u003c\/li\u003e\n\u003cli\u003e23-26 dBi at 3000-6500 MHz \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou need line of sight to the cell tower or WiFi access point for Griddy to work well. Griddy's super high gain means that any signal dispersion or reflection from trees or buildings will make Griddy much less effective.\u003c\/p\u003e\n\u003ch2\u003eInstalling Griddy\u003c\/h2\u003e\n\u003cp\u003eAs long as you're handy, professional installation isn't required. This antenna isn't any more involved than any other kind of rooftop antenna to mount, but will take a bit of careful aiming to get dialed in.\u003c\/p\u003e\n\u003cp\u003eWe cannot state this enough, Griddy has a very, very narrow beam width. It only \"sees\" a very narrow horizontal and vertical aperture. To get the best results, you'll want to move slowly to find the exact right direction. Even a 1-2 degree variance can make a huge difference.\u003c\/p\u003e\n\u003cp\u003eInstallation requires two 10mm wrench, socket or nutdrivers, or alternatively an adjustable wrench and\/or pliers.\u003c\/p\u003e\n\u003cp\u003eThe Griddy has N-Female connectors, measures 24 x 39 x 16 inches and is made of UV resistant ASA plastic and aluminum. It is IP 65 rated, and rated to a wind velocity of 130 mph.\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cp\u003eWe've packaged Griddy in two different options: the Antenna Only, and a Complete Kit.\u003c\/p\u003e\n\u003ch3\u003eAntenna Only Option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x Halves of the Grid Reflector\u003c\/li\u003e\n\u003cli\u003e1x Feedhorn\u003c\/li\u003e\n\u003cli\u003e1x Rotational L-Bracket\u003c\/li\u003e\n\u003cli\u003eAssorted bolts, washers, and clamps\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/griddy-manual\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComplete Kit Option\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x Halves of the Grid Reflector\u003c\/li\u003e\n\u003cli\u003e1x Feedhorn\u003c\/li\u003e\n\u003cli\u003e1x Rotational L-Bracket\n\u003c\/li\u003e\n\u003cli\u003eAssorted bolts, washers, and clamps\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-rs400-custom-cut-coaxial-cable?variant=40170185752679\"\u003e30 ft RS400 coaxial cable\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-ts9-male-to-n-female-pigtail-adapter\"\u003eTS9\u003c\/a\u003e, 1x \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-sma-male-to-n-female-adapter\"\u003eSMA\u003c\/a\u003e \u0026amp; 1x \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-u-fl-male-to-n-female-pigtail-adapter\"\u003eU.FL\u003c\/a\u003e pigtail adapter\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/griddy-manual\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Antenna Only","offer_id":39372843483239,"sku":"ANT66NF-GP-ANT","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Complete Kit","offer_id":40170193322087,"sku":"ANT66NF-GP-KIT","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/WideBand-Grid-Cell-Antenna_1200x1200_e06581c7-f47e-455f-8ddd-3cb5a9fc1332.jpg?v=1624306608"},{"product_id":"surecall-sc-208w-magnetic-mount-vehicle-antenna","title":"SureCall Magnetic Mount Vehicle Antenna (SC-208W)","description":"\u003cp\u003eThe SureCall Magnetic Mount Vehicle Antenna (SC-208W) is a 3.8 inch wideband omni-directional exterior vehicle antenna. It is a 50 ohm antenna with up to 2.5 dBi of gain.\u003c\/p\u003e\n\u003cp\u003eThe SC-208W is a magnetic mount antenna. It is designed to easily attach to any vehicle, and has a strong magnetic base that will hold up in the harshest of conditions. \u003c\/p\u003e\n\n\u003cp\u003eOmni-directional antennas receive signal from all directions. The antenna does not need to be pointed in the direction of a cell tower, but it must be installed in a vertical position.\u003c\/p\u003e\n\u003cp\u003eThe SC-208W comes with 12.5ft of SC-174 cable with an FME-Female connector. \u003c\/p\u003e\n\n\n","brand":"SureCall","offers":[{"title":"Default Title","offer_id":20821606662247,"sku":"SC-208W","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/SC-208W_Antenna_web-min.jpg?v=1558554921"},{"product_id":"nextivity-cel-fi-go-m-indoor-mobile-server-antenna-adhesive-black","title":"Cel-Fi GO-M Mobile Server Antenna - Adhesive","description":"\n\u003cp\u003eThe Cel-Fi Mobile Server Antenna is a cellular \/ LTE patch antenna. It provides 2.5 dBi of gain. \u003c\/p\u003e\n\u003cp\u003eThe antenna has an adhesive mount for ease of installation. It has 4m of RG-147 cable attached. It has an SMA-Male connector.\u003c\/p\u003e\n\u003cp\u003eIt measures 4mm x 22mm × 115mm.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":30061044465767,"sku":"A41-V30-100","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/antenna_mobile_server_brief_edit_1024x_f4fb0773-6990-4402-9a8c-e49e602387d2.png?v=1676668762"},{"product_id":"cel-fi-mobile-donor-antenna","title":"Cel-Fi GO-M Mobile Donor Antenna","description":"\u003cp\u003eThe Cel-Fi Mobile donor antenna is an outdoor wideband cellular omnidirectional antenna. It offers 2 to 4 dB gain across bands B2, B4, B5, B12, B13, B28.\u003c\/p\u003e\n\u003cp\u003eIt has a weather-resistant IP67 plastic casing. Attached is 3m of low-loss high-performance cable with an SMA-Male connector. \u003c\/p\u003e\n\u003cp\u003eThe antenna measures 54mm x 80mm (2.1 inches x 3.1 inches) and is available with a magnetic mount or a screw mount for different application.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Magnetic Mount","offer_id":40008511389799,"sku":"A41-V21-100","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount","offer_id":40170201219175,"sku":"A41-V36-200","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Mobile-Donor-Antenna_1.png?v=1673910512"},{"product_id":"weboost-home-outside-directional-antenna-314445","title":"weBoost Home Outside Directional Antenna (314445)","description":"\u003cp\u003eThe weBoost Home Outside Directional Antenna (314445) is a powerful directional (yagi) style antenna. It is a wideband antenna that offers up to 7-9 dBi of gain for 698-2700 MHz.\u003c\/p\u003e\n\u003cp\u003eIt is 75 ohm impedance with F-Female connectors. The antenna measures 11.375 x 8.5 x 2.625 inches (288.9 x 215.9 x 66.6 mm). The sealed housing is UV stabilized plastic and is fully weather-proof.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe weBoost Home Outside Directional Antenna (314445) is a directional antenna. Directional antennas need to be pointed towards the nearest cell tower for the best results. As this is a multi-band antenna you will need to confirm that all of the towers for the networks you wish to improve are in the same direction.\u003c\/p\u003e\n\u003cp\u003eThe included tilt-swivel mounting bracket can be used to secure attach the antenna to exterior walls. It can also be mounted to poles or rooftop vent pipes from 1.25-2.0 inches wide.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":31144512094311,"sku":"314445","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Product_Images-home-complete-antenna-mount-2.jpg?v=1573048726"},{"product_id":"weboost-home-inside-antenna-standard-314444","title":"weBoost Home Inside Antenna (Standard) (314444)","description":"\u003cp\u003eThe weBoost Home Inside Antenna (Standard) (314444) is a directional wideband indoor panel antenna boasting 5.7-7.6 dBi of gain for it's a supported frequency range of 698-2700 MHz.\u003c\/p\u003e\n\u003cp\u003eIt is a 75 ohm impedance antenna with F-Female connectors. The antenna measures 8.875 x 7.125 x 2.625 inches (225.4 x 180.9 x 66.6 mm) and has an exterior white plastic cover which allows for quick cleaning and maintenance.\u003c\/p\u003e\n\n\u003cp\u003eThe Home Inside Antenna (Standard) is a directional panel antenna. Panel antennas allow optimum reception to targeted areas. It includes a mounting bracket with 3M Command Strips, allowing it to be secure mounted vertically or horizontally on interior walls, and a built-in kickstand for shelf placement.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":31144690909287,"sku":"314444","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Product_Images-314444_Plastic_Inside_Antenna_Left_Angle.jpg?v=1680278053"},{"product_id":"weboost-home-inside-antenna-314440","title":"weBoost Home Inside Antenna (314440, 314441)","description":"\u003cp\u003eThe weBoost Home Inside Antenna (314440, 314441) is a directional wideband indoor panel antenna boasting 5.7-7.6 dBi of gain for it's a supported frequency range of 698-2700 MHz.\u003c\/p\u003e\n\u003cp\u003eThis antenna comes in two variants - a 75 ohm version with an F-Female connector (314440) and a 50 ohm version with an N-Female connector (314441). The antenna has an exterior fabric cover and measures 8.875 x 7.125 x 2.625 inches (225.4 x 180.9 x 66.6 mm).\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Home Inside Antenna is a directional panel antenna. Panel antennas allow optimum reception to targeted areas. It includes a mounting bracket with 3M Command Strips, allowing it to be secure mounted vertically or horizontally on interior walls, and a built-in kickstand for shelf placement.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"75 ohm - F-Female Connector (314440)","offer_id":39397917491303,"sku":"314440","price":99.99,"currency_code":"USD","in_stock":true},{"title":"50 ohm - N-Female Connector (314441)","offer_id":40170200432743,"sku":"314441","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Product_Images-home-complete-lifestyle-4.jpg?v=1573051408"},{"product_id":"cel-fi-lpda-r-antenna","title":"Cel-Fi LPDA-R Antenna","description":"\u003cp\u003eThe Cel-Fi LPDA-R Antenna is a wideband directional antenna offering 12-14 dBi of gain across all North American cellular frequencies.\u003c\/p\u003e\n\u003cp\u003eA log-periodic dipole array (LPDA) antenna is a powerful directional antenna. It's very powerful at picking up weak signal in one particular direction and it needs to be set up pointing in the direction of the cell tower. The LPDA-R antenna reduces signal noise, improving SINR and overall signal quality.\u003c\/p\u003e\n\u003ch2\u003eResistor\u003c\/h2\u003e\n\u003cp\u003eThe LPDA-R antenna features a 10K ohm resistor that allows the antenna connection to be validated by Cel-Fi Network Units equipped with the capability.\u003c\/p\u003e\n\u003ch2\u003eWhat is an LPDA Antenna?\u003c\/h2\u003e\n\u003cp\u003eA log-periodic dipole array (LPDA) antenna is a type of directional antenna. Some other manufacturers call these antennas \"yagi\" antennas, although technically yagi and LPDA antennas are slightly different.\u003c\/p\u003e\n\u003cp\u003eDirectional antennas need to be focused at the nearest cell tower. They are very powerful at picking up signal in one narrow direction. They are formed of a long central \"boom\" with attached metal rods called \"dipole elements\". The frequencies the antenna picks up depends on the length of the dipole elements.\u003c\/p\u003e\n\u003cp\u003eA \"yagi\" antenna has dipole elements all of the same size. This means that it will only transmit and receive signals on a very narrow frequency range. Since modern cell networks use a very wide range of frequencies, this means that yagi antennas are usually only suitable for certain public safety situations, or when only one specific network needs to be boosted.\u003c\/p\u003e\n\u003cp\u003eMost directional antennas on this site are log-periodic dipole array antennas. LPDA antennas have a wide range of dipole elements. The elements are spaced at intervals following a logarithmic function of the frequency, known as Σ or sigma. The different length of the dipole elements means that LPDA antennas transmit and receive signals on a wide range of cellular frequencies. The elements taper into a triangle shape (as seen in the image of the Cel-Fi LPDA antenna on this page). The relationship between the lengths is a function known as tau. They are wideband directional antennas that will boost signal on most North American cell carriers and so are well-suited to most cellular booster installations.\u003c\/p\u003e\n\u003cp\u003eThe Cel-Fi LPDA antenna leaves the central boom and dipole arrays uncovered, but some other kinds of LPDA antennas have ABS plastic coverings.\u003c\/p\u003e\n\u003ch2\u003eWhy Use an LPDA Antenna?\u003c\/h2\u003e\n\u003cp\u003eLPDA antennas are ideal for use in situations with low SINR. SINR, or Signal to Interference Plus Noise Ratio, is a measure of an LTE signal's quality. Clear signal has a SINR of over 10 dB, while low quality signal has a SINR of under 5 dB. SINR and signal quality is different to RSRP, or signal strength. RSRP measures signal strength and is boosted by a cellular repeater system's gain. Strong signal power is important for good coverage but despite the importance attached to dB and signal strength bars, low SINR is just as important for clear calls and reliable coverage.\u003c\/p\u003e\n\u003cp\u003eLow SINR results in low throughput, poor sensitivity, poor sound quality, and a generally bad user experience. Managing SINR is vital to a good cellular booster design. High signal power (gain) is not enough to boost signal as signal quality will be poor if the noise level is too high.\u003c\/p\u003e\n\u003cp\u003eA directional LPDA antenna is a great choice if signal quality is strong but noisy (low SINR). Noisy donor signal is usually caused by inter-cell interference from multiple nearby cell towers using the same frequencies. Focussing and amplifying just one of the cell towers will reduce noise and improve signal quality.\u003c\/p\u003e\n\u003ch2\u003eMounting\u003c\/h2\u003e\n\u003cp\u003eThe antenna can be mounted to a flat surface or to a pole. It features a mast down-tilt bracket and U-Bolts. The antenna is designed to be mounted at a 45° tilt. It comes with a specially designed mount attachment that enables the antenna to be mounted at a tilt, for optimal matching of macro donor signals. Macro antennas are cross-polarized and Cel-Fi have found considerably better results in the field when tilting the LPDA antenna 45° to match the cross-polarized donor signal.\u003c\/p\u003e\n\u003cp\u003eIdeally the antenna should be pole-mounted at a tilt and aimed to the nearest cell tower. Although it can be a little time-consuming, finding the right antenna location and direction will greatly improve booster system performance. Cel-Fi products, including the QUATRA and GO X, are make aiming a directional antenna as easy as possible. The devices will give you a signal reading that includes both RSRP (signal strength) and SINR (signal quality), on the WAVE app, making it easier to try different antenna locations and directions and find the best signal.\u003c\/p\u003e\n\u003cp\u003eThe antenna includes a 10 inch (25 cm) RG58 pigtail with an N-type Female connector.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":31470208417895,"sku":"A62-V44-201","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/lpdar.jpg?v=1575051036"},{"product_id":"cel-fi-lp-siso-indoor-omni-antenna","title":"Cel-Fi LP SISO Indoor Omni Antenna","description":"\u003cp\u003eThe Cel-Fi LP SISO Indoor Omni Antenna is an attractive, low-profile ceiling antenna. It is a SISO (Single-Input-Single-Output) antenna. In a SISO unit one antenna is used to transmit and one antenna is used to receive. \u003c\/p\u003e\n\u003cp\u003eIt provides a 360 degree horizontal coverage pattern and up to 3-5 dBi of gain.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm antenna with an N-Female connector. It is 17.9mm in diameter. It is made of white ABS plastic.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":31470344634471,"sku":"A11-H43-201","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/LP_Omni_Antenna.jpg?v=1575051001"},{"product_id":"wilson-high-gain-lpda-antenna","title":"weBoost (Wilson) High Gain LPDA Antenna (311228)","description":"\n\u003cp\u003eThe weBoost (Wilson) High Gain LPDA Antenna (311228) is a wideband log-periodic dipole array antenna offering 11-13 dBi of gain across all North American cellular frequencies.\u003c\/p\u003e\n\u003cp\u003eThe LPDA Antenna is a powerful directional antenna. It's very powerful at picking up weak signal in one particular direction and it needs to be set up pointing in the direction of the cell tower. The LPDA antenna reduces signal noise, improving SINR and overall signal quality.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorks on all worldwide cellular bands for voice and data: LTE\/CDMA\/GSM\/UMTS\/AWS\u003c\/li\u003e\n\u003cli\u003e High gain antenna for WilsonPRO cellular repeater\/boosters \u003c\/li\u003e\n\u003cli\u003eDesigned for building exterior installation; direct at cell tower for best signal \u003c\/li\u003e\n\u003cli\u003eRugged and waterproof for all weather operation \u003c\/li\u003e\n\u003cli\u003eSimple install kit with tilt\/swivel bracket for 1.5-2 inch diameter pipe\/mast\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is an LPDA antenna?\u003c\/h3\u003e\n\u003cp\u003eA log-periodic dipole array (LPDA) antenna is a type of directional antenna. Some manufacturers call these antennas \"yagi\" antennas, although technically yagi and LPDA antennas are slightly different.\u003c\/p\u003e\n\u003cp\u003eDirectional antennas need to be focused at the nearest cell tower. They are very powerful at picking up signal in one narrow direction. They are formed of a long central \"boom\" with attached metal rods called \"dipole elements\". The frequencies the antenna picks up depends on the length of the dipole elements.\u003c\/p\u003e\n\u003cp\u003eA \"yagi\" antenna has dipole elements all of the same size. This means that it will only transmit and receive signals on a very narrow frequency range. Since modern cell networks use a very wide range of frequencies, this means that yagi antennas are usually only suitable for certain public safety situations, or when only one specific network needs to be boosted.\u003c\/p\u003e\n\u003cp\u003eMost directional antennas on this site are log-periodic dipole array antennas. LPDA antennas have a wide range of dipole elements. The elements are spaced at intervals following a logarithmic function of the frequency, known as Σ or sigma. The different length of the dipole elements means that LPDA antennas transmit and receive signals on a wide range of cellular frequencies. The elements taper into a triangle shape. The relationship between the lengths is a function known as tau. They are wideband directional antennas that will boost signal on most North American cell carriers and so are well-suited to most cellular booster installations.\u003c\/p\u003e\n\u003cp\u003eThis LPDA antenna leaves the central boom and dipole arrays uncovered, but some other kinds of LPDA antennas have ABS plastic coverings.\u003c\/p\u003e\n\u003ch3\u003eWhy use an LPDA antenna?\u003c\/h3\u003e\n\u003cp\u003eLPDA antennas are ideal for use in situations with low SINR. SINR, or Signal to Interference Plus Noise Ratio, is a measure of an LTE signal's quality. Clear signal has a SINR of over 10 dB, while low quality signal has a SINR of under 5 dB. SINR and signal quality is different to RSRP, or signal strength. RSRP measures signal strength and is boosted by a cellular repeater system's gain. Strong signal power is important for good coverage but despite the importance attached to dB and signal strength bars, low SINR is just as important for clear calls and reliable coverage.\u003c\/p\u003e\n\u003cp\u003eLow SINR results in low throughput, poor sensitivity, poor sound quality, and a generally bad user experience. Managing SINR is vital to a good cellular booster design. High signal power (gain) is not enough to boost signal as signal quality will be poor if the noise level is too high.\u003c\/p\u003e\n\u003cp\u003eA directional LPDA antenna is a great choice if signal quality is strong but noisy (low SINR). Noisy donor signal is usually caused by inter-cell interference from multiple nearby cell towers using the same frequencies. Focussing and amplifying just one of the cell towers will reduce noise and improve signal quality.\u003c\/p\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":32000986710119,"sku":"311228","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Product_Images-LPDAAntennaPole.jpg?v=1582920414"},{"product_id":"cel-fi-trucker-antenna","title":"Cel-Fi Trucker Antenna","description":"\u003cp\u003eThe Cel-Fi Trucker Antenna (A21-V31-100) is a high-performance wideband antenna option for over-the-road (OTR) users. It is designed to be used as an outside (donor) antenna on trucks, semis, RVs, and any other large vehicles.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm impedance antenna with up to 4 dBi of gain. It comes with 4 meters of cable attached. It has SMA-Male connectors.\u003c\/p\u003e\n\u003cp\u003eThe trucker antenna has a heavy-duty spring base and includes a mirror-mount for easy installation.\u003c\/p\u003e\n\n","brand":"Cel-Fi","offers":[{"title":"Default Title","offer_id":32161459142759,"sku":"A21-V31-100","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/trucker_web_500_1.jpg?v=1587581153"},{"product_id":"mimo-log-periodic-hotspot-external-antennas","title":"MIMO 2x2 Log Periodic External Antenna Kit for 4G LTE\/5G Hotspots \u0026 Routers","description":"\u003cp\u003eIf you're looking to get the absolute \u003ca href=\"https:\/\/www.waveform.com\/blogs\/main\/4g-lte-speeds-home\"\u003ebest data rates for your LTE or 5G hotspot\u003c\/a\u003e, using cross-polarized MIMO external antennas is often the best option.\u003c\/p\u003e\n\u003cp\u003eOur MIMO Log Periodic 11 dBi Hotspot\/Router External Antenna kit for \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/\"\u003e4G LTE\/5G Hotspots \u0026amp; Routers\u003c\/a\u003e includes everything you need, including the adapters necessary to connect the MIMO antennas to your hotspot or LTE router.\u003c\/p\u003e\n\u003cp\u003eOur Log Periodic antennas offer up to 11 dBi gain between 1710 and 6000 MHz, and 10 dBi gain between 600 MHz and 900 MHz.\u003c\/p\u003e\n\u003cp\u003eThese antennas are also sometimes referred to as \"yagi antennas\" by they are technically called log periodic antennas.\u003c\/p\u003e\n\u003ch3\u003eIncluding our Ultra-Flexible Twin-RS240 Cables\u003c\/h3\u003e\n\u003cp\u003eOur Twin-RS240 30ft cables make it easier than ever to connect your 2x2 MIMO Antenna to your LTE router, hotspot, or signal booster system. This cable assembly has two strands of low-loss RS240 coaxial cable glued together, with SMA-Male connectors on the \"indoor\" end, to minimize the bulk of running multiple cables and make installation easier than ever.\u003c\/p\u003e\n\u003cp\u003eAlso included in the bundle are two SMA-Female to TS9-Male pigtail adapters, two SMA-Female to U.FL pigtail connectors, and two SMA-Male to N-Male connectors, to ensure you have everything you might need to connect almost any device.\u003c\/p\u003e\n\u003cp\u003eLooking to extend your cables for a longer cable run? You can rely on our \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-rs240-custom-cut-n-male-coaxial-cable?variant=39699910623335\" target=\"_blank\"\u003ecustom-cut SMA extension cables\u003c\/a\u003e, available in various lengths to suit your needs. Please note that these cables are sold individually, so ensure that you purchase two cables to complete your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCheck out our \u003ca href=\"products\/mimo-log-periodic-external-antennas-v2\"\u003enew upgraded kit\u003c\/a\u003e with the ultra-flexible 20 ft UltraFlex Twin Cable, for a simplified installation. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eDetailed Guides for your 4G LTE\/5G Router\u003c\/h2\u003e\n\u003cp\u003eEvery hotspot and router is different, so we've written up \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/\"\u003edetailed guides for some of the most common devices here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdapters and Connectors\u003c\/h3\u003e\n\u003cp\u003eOur Twin RS240 coax cables have SMA-Male connectors on the \"indoor\" end. These are able to connect directly to LTE routers, like the devices by \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/cradlepoint-cor-ibr900\"\u003eCradlepoint\u003c\/a\u003e, \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/mofi4500-4gxelte\"\u003eMoFi\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/pepwave-max-br1\"\u003ePepwave\u003c\/a\u003e, which typically make use of SMA connectors.\u003c\/p\u003e\n\u003cp\u003eBattery-powered hotspots like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/jetpack-8800L\"\u003eVerizon MiFi Jetpack\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/netgear-nighthawk-m1\"\u003eNetgear Nighthawk M1 MR1100\u003c\/a\u003e may have TS9 connectors. Some devices without external antenna ports like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/t-mobile-5g-gateway\"\u003eT-Mobile High Speed 5G Internet Gateway\u003c\/a\u003e may have internal U.FL connectors.\u003c\/p\u003e\n\u003cp\u003eWe include both TS9-Male to SMA-Female and U.FL to SMA-Female adapters, which allow our MIMO antennas to be connected to almost any hotspot or LTE router.\u003c\/p\u003e\n\u003cp\u003eIf you're unsure of which adapter you need, how to connect it, or where to begin, we suggest reading our guide for your router, or referring to your user manual. We know, there's a lot of information out there and this can get very technical.\u003c\/p\u003e\n\u003cp\u003eDon't be afraid to reach out to us for support!\u003c\/p\u003e\n\u003ch2\u003eFrequency Bands Support\u003c\/h2\u003e\n\u003cp\u003eOur wideband log-periodic antennas support almost every 3G, 4G LTE, and low\/mid-band 5G service in use in the US and across the world today:\u003c\/p\u003e\n\u003ch3\u003eSupports all 4G LTE and 5G bands between 600 and 6000 MHz, including:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT\u0026amp;T: \u003c\/strong\u003eB2\/n2, B4, B5\/n5, B12, B17, B29, B30, B46, B66\/n66, n77\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerizon: \u003c\/strong\u003eB2\/n2, B4, B5\/n5, B13, B46, B48\/n48, B66\/n66, n77\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Mobile:\u003c\/strong\u003e B2, B4, B5, B12, B25, B26, B41\/n41, B46, B66, B71\/n71, n77\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrivate 4G LTE and 5G: \u003c\/strong\u003eCBRS, B48\/n48\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported US Frequency Bands:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBand 2 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 4 (1700\/2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 5 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 12 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 13 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 14 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 17 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 25 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 26 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 29 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 30 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 46 (5200 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 48 (3500 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 66 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 71 (600 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 77 (3700 MHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported LTE Bands:\u003c\/strong\u003e B1, B2, B3, B4, B5, B7, B8, B11, B12, B13, B14, B17, B18, B19, B20, B21, B22, B25, B26, B28, B29, B30, B32, B34, B37, B38, B39, B40, B41, B42, B43, B46, B47, B48, B50, B51, B53, B65, B66, B67, B69, B70, B71, B74, B75, B76, B85, B103, B106\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported 5G Bands: \u003c\/strong\u003en1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n34, n38, n39, n40, n41, n46, n47, n48, n50, n51, n53, n65, n66, n67, n70, n71, n74, n75, n76, n77, n78, n79, n80, n81, n82, n83, n84, n85, n86, n89, n90, n91, n92, n93, n94, n95, n96, n97, n98, n99, n100, n101, n102, n105\u003c\/p\u003e\n\u003ch2\u003ePicking the Right Kit\u003c\/h2\u003e\n\u003ch3\u003eMIMO Log Periodic vs MIMO Panel\u003c\/h3\u003e\n\u003cp\u003eWe also sell a \u003ca href=\"https:\/\/www.waveform.com\/products\/2x2-mimo-panel-kit\"\u003eMIMO Panel Antenna Kit for Hotspots\/Routers\u003c\/a\u003e that is very similar to this kit but uses a single MIMO Panel Antenna that makes installation easier, but has less gain. We recommend using the MIMO Log Periodic Antennas if you have line-of-sight to your nearest cell towers. If you're surrounded by trees, buildings, or hills, the MIMO Panel Antenna Kit will likely perform somewhat better than the configuration on this page.\u003c\/p\u003e\n\u003ch3\u003e2x2 MIMO vs 4x4 MIMO\u003c\/h3\u003e\n\u003cp\u003eInstalling external MIMO antennas is all about maximizing your data speeds. Different routers and hotspots have different configurations for external antenna ports.\u003c\/p\u003e\n\u003cp\u003eMost hotspots, like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/netgear-nighthawk-m1\"\u003eNetgear Nighthawk M1\u003c\/a\u003e and \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/jetpack-8800L\"\u003eVerizon Jetpack 8800L\u003c\/a\u003e will have two antenna ports, while some of the more advanced routers like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/t-mobile-5g-gateway\"\u003eT-Mobile 5G Gateway\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/mofi5500-5gxelte\"\u003eMoFi 5500\u003c\/a\u003e often have four ports.\u003c\/p\u003e\n\u003cp\u003eOur MIMO External Antenna Kits are available in both 2x2 MIMO and 4x4 MIMO configurations, with 2 and 4 antenna elements respectively.\u003c\/p\u003e\n\u003cp\u003eWhich one you should pick depends entirely on the device you have. If you've got two antenna ports, then you need the\u003ca href=\"https:\/\/www.waveform.com\/products\/mimo-log-periodic-hotspot-external-antennas\"\u003e 2x2 MIMO Antenna Kit\u003c\/a\u003e, while if you're working with four external antenna ports, it's usually best to go with a \u003ca href=\"https:\/\/www.waveform.com\/products\/4x4-mimo-log-periodic-kit\"\u003e4x4 MIMO Antenna kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/repeaterstore.myshopify.com\/products\/rsrf-600-6000-mhz-log-periodic-outdoor-antenna\"\u003eWideband Log Periodic Antenna\u003c\/a\u003e including pole-mount hardware\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-twin-rs240-30ft-bundle\"\u003eTwin-RS240 N-Male to SMA-Male Cable bundle\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-30ft-twin-rs240-n-male-to-sma-male-coaxial-cable\"\u003e15ft or 30ftTwin RS240 N-Male to SMA-Male Coaxial Cable\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-sma-female-to-ts9-male-pigtail-adapter\"\u003eTS9-Male to SMA-Female Adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/sma-female-to-u-fl-pigtail-adapter\" target=\"_blank\"\u003eU.FL to SMA-Female Pigtail Adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-n-male-to-sma-male-adapter\"\u003eN-Male to SMA-Male Barrel Adapters\u003c\/a\u003e (for setup and testing only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e1x Universal J-Mount Antenna Mount\u003c\/li\u003e\n\u003cli\u003eOptional: 2x \u003ca href=\"https:\/\/www.waveform.com\/products\/50-ohm-surge-protector\"\u003eLightning Surge Protector Kit\u003c\/a\u003e including 5 ft RS240 cable and 5 ft grounding cable\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/2x2-mimo-manual\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Lightning Surge Protectors\u003c\/h3\u003e\n\u003cp\u003eWe highly recommend using our \u003ca href=\"https:\/\/www.waveform.com\/products\/50-ohm-surge-protector\"\u003eWaveform Lightning Surge Protector Kits\u003c\/a\u003e to protect your hotspot or 4G LTE\/5G router from electrical surges due to lightning. Our Lightning Surge Protector Kits include a 5 ft RS240 Jumper cable and a short length of grounding cable.\u003c\/p\u003e\n\u003cp\u003eThe surge protectors should be installed just before the coaxial cable enters the building. If you're unsure about grounding your outdoor antenna, We've got a guide on \u003ca href=\"https:\/\/www.waveform.com\/pages\/signal-booster-antenna-grounding\"\u003ehow to ground a rooftop antenna\u003c\/a\u003e.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"None \/ 30 ft","offer_id":39937463910503,"sku":"MIMO-LP-KIT","price":199.99,"currency_code":"USD","in_stock":false},{"title":"None \/ 15 ft","offer_id":40170205872231,"sku":"MIMO-LP-KIT-15","price":179.99,"currency_code":"USD","in_stock":false},{"title":"2x Lightning Surge Protector Kits \/ 30 ft","offer_id":40170205937767,"sku":"MIMO-LP-KIT-LSP","price":239.99,"currency_code":"USD","in_stock":false},{"title":"2x Lightning Surge Protector Kits \/ 15 ft","offer_id":40170205970535,"sku":"MIMO-LP-KIT-15-LSP","price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/MIMOLPDAAntennakitHeroImageV2.png?v=1679946432"},{"product_id":"2x2-mimo-panel-kit","title":"MIMO 2x2 Panel External Antenna Kit for 4G LTE\/5G Hotspots \u0026 Routers","description":"\u003cp\u003eIf you're looking to get the absolute \u003ca href=\"https:\/\/www.waveform.com\/blogs\/main\/4g-lte-speeds-home\"\u003ebest data rates for your LTE or 5G hotspot\u003c\/a\u003e, using cross-polarized MIMO external antennas is often the best option.\u003c\/p\u003e\n\u003cp\u003eOur MIMO Panel External Antenna Kit for \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/\"\u003e4G LTE\/5G Hotspots \u0026amp; Routers\u003c\/a\u003e includes everything you need to mount your external antennas, as well as the adapters necessary to connect the MIMO antenna to your hotspot or LTE router.\u003c\/p\u003e\n\u003cp\u003eOur MIMO Panel antenna offers up to 9 dBi gain between 1710 and 2700 MHz, and 6 dBi gain between 600 MHz and 900 MHz.\u003c\/p\u003e\n\u003ch3\u003eIncluding our Ultra-Flexible Twin-RS240 Cables\u003c\/h3\u003e\n\u003cp\u003eOur Twin-RS240 30ft cables make it easier than ever to connect your 2x2 MIMO Antenna to your LTE router, hotspot, or signal booster system. This cable assembly has two strands of low-loss RS240 coaxial cable glued together, with SMA-Male connectors on the \"indoor\" end, to minimize the bulk of running multiple cables and make installation easier than ever.\u003c\/p\u003e\n\u003cp\u003eAlso included in the bundle are two SMA-Female to TS9-Male pigtail adapters, two SMA-Female to U.FL pigtail connectors, and two SMA-Male to N-Male connectors, to ensure you have everything you might need to connect almost any device.\u003c\/p\u003e\n\u003cp\u003eLooking to extend your cables for a longer cable run? You can rely on our \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-rs240-custom-cut-n-male-coaxial-cable?variant=39699910623335\" target=\"_blank\"\u003ecustom-cut SMA extension cables\u003c\/a\u003e, available in various lengths to suit your needs. Please note that these cables are sold individually, so ensure that you purchase two cables to complete your setup.\u003c\/p\u003e\n\u003ch2\u003eDetailed Guides for your 4G LTE\/5G Router\u003c\/h2\u003e\n\u003cp\u003eEvery hotspot and router is different, so we've written up \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/\"\u003edetailed guides for some of the most common devices here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdapters and Connectors\u003c\/h3\u003e\n\u003cp\u003eOur Twin RS240 coax cables have SMA-Male connectors on the \"indoor\" end. These are able to connect directly to LTE routers, like the devices by \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/cradlepoint-cor-ibr900\"\u003eCradlepoint\u003c\/a\u003e, \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/mofi4500-4gxelte\"\u003eMoFi\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/pepwave-max-br1\"\u003ePepwave\u003c\/a\u003e, which typically make use of SMA connectors.\u003c\/p\u003e\n\u003cp\u003eBattery-powered hotspots like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/jetpack-8800L\"\u003eVerizon MiFi Jetpack\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/netgear-nighthawk-m1\"\u003eNetgear Nighthawk M1 MR1100\u003c\/a\u003e may have TS9 connectors. Some devices without external antenna ports like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/t-mobile-5g-gateway\"\u003eT-Mobile High Speed 5G Internet Gateway\u003c\/a\u003e may have internal U.FL connectors.\u003c\/p\u003e\n\u003cp\u003eWe include both TS9-Male to SMA-Female and U.FL to SMA-Female adapters, which allow our MIMO antennas to be connected to almost any hotspot or LTE router.\u003c\/p\u003e\n\u003cp\u003eIf you're unsure of which adapter you need, how to connect it, or where to begin, we suggest reading our guide for your router, or referring to your user manual. We know, there's a lot of information out there and this can get very technical.\u003c\/p\u003e\n\u003cp\u003eDon't be afraid to reach out to us for support!\u003c\/p\u003e\n\u003ch2\u003eFrequency Bands Support\u003c\/h2\u003e\n\u003cp\u003eOur wideband MIMO panel antennas support almost every 3G, 4G LTE, and low\/mid-band 5G service in use in the US and across the world today:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports all 4G LTE and 5G bands between 600 and 2700 MHz, including: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT\u0026amp;T: \u003c\/strong\u003eB2, B4, B5, B12, B17, B29, B30, B66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerizon: \u003c\/strong\u003eB2, B4, B5, B13, B66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Mobile:\u003c\/strong\u003e B2, B4, B5, B12, B66, B71\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported US Frequency Bands:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBand 2 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 4 (1700\/2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 5 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 12 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 13 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 14 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 17 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 25 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 26 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 30 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 66 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 71 (600 MHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported LTE Bands:\u003c\/strong\u003e Band 1-10, Band 12-20, Band 23, Band 25-30, Band 33-41, Band 65-71, B85\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported 5G Bands: \u003c\/strong\u003en1, n2, n3, n5, n7, n8, n12, n14, n18, n20, n25, n26, n28, n29, n30 n34, n38, n39, n40, n41, n65, n66, n70, n71, n80, n81, n82, n83, n84, n86, n89, n90, n95\u003c\/p\u003e\n\u003ch2\u003ePicking the Right Kit\u003c\/h2\u003e\n\u003ch3\u003eMIMO Panel vs MIMO Log Periodic\u003c\/h3\u003e\n\u003cp\u003eWe also sell a \u003ca href=\"https:\/\/www.waveform.com\/products\/mimo-log-periodic-hotspot-external-antennas\"\u003eMIMO 2x2 Log Periodic Antenna Kit for Hotspots\/Routers\u003c\/a\u003e that is very similar to this kit but with slightly higher gain and slightly narrower directionality. We recommend using the MIMO Log Periodic Antennas if you have line-of-sight to your nearest cell towers. If you're surrounded by trees, buildings, or hills, this MIMO Panel Antenna Kit will likely perform somewhat better than the Log Periodic Antenna Kit.\u003c\/p\u003e\n\u003ch3\u003e2x2 MIMO vs 4x4 MIMO\u003c\/h3\u003e\n\u003cp\u003eInstalling external MIMO antennas is all about maximizing your data speeds. Different routers and hotspots have different configurations for external antenna ports.\u003c\/p\u003e\n\u003cp\u003eMost hotspots, like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/netgear-nighthawk-m1\"\u003eNetgear Nighthawk M1\u003c\/a\u003e and \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/jetpack-8800L\"\u003eVerizon Jetpack 8800L\u003c\/a\u003e will have two antenna ports, while some of the more advanced routers like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/t-mobile-5g-gateway\"\u003eT-Mobile 5G Gateway\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/mofi5500-5gxelte\"\u003eMoFi 5500\u003c\/a\u003e often have four ports.\u003c\/p\u003e\n\u003cp\u003eWhich kit you need depends entirely on the device you have. If you've got two antenna ports, then you need the \u003ca href=\"https:\/\/www.waveform.com\/products\/2x2-mimo-panel-kit\"\u003e2x2 MIMO Antenna Kit\u003c\/a\u003e, while if you're working with four external antenna ports, it's usually best to go with a 4x4 MIMO Antenna kit like the \u003ca rel=\"noopener\" title=\"Waveform QuadPro antenna kit\" href=\"https:\/\/www.waveform.com\/products\/quadpro\" target=\"_blank\"\u003eWaveform QuadPro 4x4.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/2x2-mimo-outdoor-panel-antenna\"\u003eWideband MIMO 2x2 Panel Antenna\u003c\/a\u003e including pole-mount hardware\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-twin-rs240-bundle\"\u003eTwin\u003c\/a\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-twin-rs240-bundle\"\u003e-RS240 N-Male to SMA-Male Cable bundle\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-30ft-twin-rs240-n-male-to-sma-male-coaxial-cable\"\u003e15ft or 30ftTwin RS240 N-Male to SMA-Male Coaxial Cable\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-sma-female-to-ts9-male-pigtail-adapter\"\u003eTS9-Male to SMA-Female Adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/sma-female-to-u-fl-pigtail-adapter\" target=\"_blank\"\u003eU.FL to SMA-Female Pigtail Adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-n-male-to-sma-male-adapter\"\u003eN-Male to SMA-Male Barrel Adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e1x Universal J-Mount Antenna Mount\u003c\/li\u003e\n\u003cli\u003eOptional: 2x \u003ca href=\"https:\/\/www.waveform.com\/products\/50-ohm-surge-protector\"\u003eLightning Surge Protector Kit\u003c\/a\u003e including 5 ft RS240 cable and grounding cable\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/2x2-mimo-manual\"\u003eUser manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Lightning Surge Protectors\u003c\/h3\u003e\n\u003cp\u003eWe highly recommend using our \u003ca href=\"https:\/\/www.waveform.com\/products\/50-ohm-surge-protector\"\u003eWaveform Lightning Surge Protector Kits\u003c\/a\u003e to protect your hotspot or 4G LTE\/5G router from electrical surges due to lightning. Our Lightning Surge Protector Kits include a 5 ft RS240 Jumper cable and a short length of grounding cable.\u003c\/p\u003e\n\u003cp\u003eThe surge protectors should be installed just before the coaxial cable enters the building. If you're unsure about grounding your outdoor antenna, We've got a guide on \u003ca href=\"https:\/\/www.waveform.com\/pages\/signal-booster-antenna-grounding\"\u003ehow to ground a rooftop antenna\u003c\/a\u003e.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"None \/ 30 ft","offer_id":39937457291367,"sku":"MIMO-PA-KIT","price":179.99,"currency_code":"USD","in_stock":false},{"title":"None \/ 15 ft","offer_id":40170213343335,"sku":"MIMO-PA-KIT-15","price":169.99,"currency_code":"USD","in_stock":false},{"title":"2x Lightning Surge Protector Kits \/ 30 ft","offer_id":40170213441639,"sku":"MIMO-PA-KIT-LSP","price":239.99,"currency_code":"USD","in_stock":false},{"title":"2x Lightning Surge Protector Kits \/ 15 ft","offer_id":40170213474407,"sku":"MIMO-PA-KIT-15-LSP","price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/MIMOPanelAntennakitHeroImageV2.png?v=1679947527"},{"product_id":"2x2-mimo-outdoor-panel-antenna","title":"2x2 Cross-Polarized MIMO Outdoor Panel Antenna, 600 - 2700 MHz","description":"\u003cp\u003eOur +\/- 45 degree cross-polarized MIMO panel antenna covers the most common 4G LTE bands in use today, as well as low-band and mid-band 5G frequencies. The antenna has two short pigtails with N-female connectors\u003c\/p\u003e\n\u003cp\u003eThis cross-polarized antenna is also available as part of a kit including coax cables, surge protectors, adapters, and an antenna mount here: \u003ca href=\"\/products\/mimo-panel-kit-for-hotspots-routers\"\u003eMIMO Panel Antenna Kit for 4G LTE Routers\/Hotspots\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe mounting equipment included with this antenna is intended for use against a pole and is not suitable for indoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: This antenna is pictured with, but does not include, our \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-universal-j-mount-antenna-mount\"\u003eUniversal J-Mount\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 9 dBi gain between 1710 and 2700 MHz, and 6 dBi gain between 600 MHz and 900 MHz.\u003c\/li\u003e\n\u003cli\u003e+\/- 45 degree cross-polarization.\u003c\/li\u003e\n\u003cli\u003e2x N-Type Female connectors\u003c\/li\u003e\n\u003cli\u003eIncludes pole-mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequency Bands Support\u003c\/h2\u003e\n\n\u003cp\u003eOur wideband cross-polarized panel antennas support almost every 3G, 4G LTE, and low\/mid-band 5G service in use in the US and across the world today:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUS 4G LTE Bands: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT\u0026amp;T: \u003c\/strong\u003eB2, B4, B5, B12, B17, B29, B30, B66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerizon: \u003c\/strong\u003eB2, B4, B5, B13, B66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Mobile:\u003c\/strong\u003e B2, B4, B5, B12, B66, B71\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprint: \u003c\/strong\u003eB25 B26, B41\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported US Frequency Bands:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBand 2 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 4 (1700\/2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 5 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 12 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 13 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 14 (700 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 17 (700 MHz)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBand 25 (1900 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 26 (850 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 30 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 66 (2100 MHz)\u003c\/li\u003e\n\u003cli\u003eBand 71 (600 MHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAll supported LTE Bands:\u003c\/strong\u003e Band 1-10, Band 12-20, Band 23, Band 25-30, Band 33-41, Band 65-71, B85\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported 5G Bands in use today:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAT\u0026amp;T: \u003c\/strong\u003en5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Mobile: \u003c\/strong\u003en71, n41\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll supported 5G Bands: \u003c\/strong\u003en1, n2, n3, n5, n7, n8, n12, n14, n18, n20, n25, n26, n28, n29, n30 n34, n38, n39, n40, n41, n65, n66, n70, n71, n80, n81, n82, n83, n84, n86, n89, n90, n95\u003cbr\u003e\u003c\/p\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":32563421675623,"sku":"MIMO-PA-ANT","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/jpg-antenna-2_c8cc98e4-acb5-4c11-bf27-e90a92a72d25.jpg?v=1687557150"},{"product_id":"weboost-drive-magnetic-outside-antenna-311215-311216","title":"weBoost Drive Magnetic Outside Antenna 311216","description":"\u003cp\u003eThe weBoost Drive Magnetic Outside Antenna is an wideband omnidirectional outdoor antenna with a 3.4 inch sharkfin design and built for in-vehicle signal booster kits. It offers up to 0.41 - 1.1 dBi of gain.\u003c\/p\u003e\n\u003cp\u003eThis antenna features a strong magnetic base for easy and secure attachment to the outside of your vehicle. It is suitable for all weather conditions. The base has four built-in cable exit points. It comes with 10 ft of coax cable.\u003c\/p\u003e\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e311216\u003c\/strong\u003e antenna unit has an \u003cstrong\u003eSMA\u003c\/strong\u003e connector and is used in the \u003ca title=\"weBoost Drive X vehicle signal booster kit\" href=\"https:\/\/www.waveform.com\/products\/weboost-drive-x-475021\" target=\"_blank\"\u003eweBoost Drive X\u003c\/a\u003e vehicle kit as well as the newer models of the \u003ca title=\"weBoost Drive Reach vehicle signal booster kit\" href=\"https:\/\/www.waveform.com\/products\/weboost-drive-reach-470154\" target=\"_blank\"\u003eweBoost Drive Reach\u003c\/a\u003e vehicle kit.\u003c\/p\u003e\n\u003cp\u003eIf you are unsure which weBoost Drive Magnetic Outside Antenna is right for you, please feel free to \u003ca href=\"https:\/\/www.waveform.com\/pages\/contact-us\"\u003econtact us\u003c\/a\u003e!\u003c\/p\u003e","brand":"weBoost","offers":[{"title":"Default Title","offer_id":40170205839463,"sku":"311216","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/ProductImages-MiniMagAntennaAngle_5aceeaaf-d3cb-44fe-9ad2-5345a6d594db.jpg?v=1593085710"},{"product_id":"rsrf-add-on-antenna-kit","title":"Add-On Antenna Kit","description":"\u003cp\u003eWaveform Add-On Antenna Kits are 50 ohm expansion kits suitable for use with many different signal booster systems on our site.\u003c\/p\u003e\n\u003cp\u003eIn many signal situations, maximum signal booster coverage can only be achieved by using additional antennas. These expansion kits are designed to slot into any 50 ohm (N-type connectors) booster kit and spread signal coverage to additional parts of your building.\u003c\/p\u003e\n\u003cp\u003eWe offer one, two, or three additional antennas. There is a choice of either panel or dome antennas. Each kit comes with a signal splitter, a 1ft jumper cable, and 30ft of Waveform 400-type cable (one 30ft length per additional antenna).\u003c\/p\u003e\n\u003ch2\u003eAntennas\u003c\/h2\u003e\n\u003cp\u003eThe add-on kit offers a choice of either the Waveform Panel Antenna or the Waveform Dome Antenna.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-panel-antenna\" title=\"rsrf panel antenna\"\u003eWaveform Panel Antenna\u003c\/a\u003e is a high gain wideband directional antenna offering up to 7 - 8 dBi of gain. Panel antennas allow optimum reception to targeted areas. A wall mounted antenna projects signal in front of it. This antenna has 260mm attached cable with N-type connectors.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-dome-antenna\" title=\"rsrf dome antenna\" target=\"_blank\"\u003eWaveform Dome Antenna\u003c\/a\u003e is a wideband omni-directional ceiling antenna with 3 - 5 dBi of gain. Omni-directional antennas receive signal from all directions, and so the antenna needs to be installed in a vertical position in the area of strongest signal. For best results, the antenna needs to be mounted to the ceiling.\u003c\/p\u003e\n\u003ch3\u003eSplitter\u003c\/h3\u003e\n\u003cp\u003eEach kit includes the required 2-way\/3-way\/4-way splitter. Waveform N-Female signal splitters are low-loss, high-performance 50 ohm splitters.\u003c\/p\u003e\n\u003ch3\u003eCable\u003c\/h3\u003e\n\u003cp\u003eEach kit uses Waveform's RS400 Ultra Low Loss Coax Cable. This is a 400-type cable with N-Male connectors. It is a flexible, weatherproof, very low loss, high-performance cable. \u003c\/p\u003e\n\u003cp\u003eA 1ft RS200 jumper cable is included to connect the signal splitter. A 30ft length of RS400 is also included for each antenna ordered.\u003c\/p\u003e\n\n\n","brand":"Waveform","offers":[{"title":"1 Antenna \/ Panel Antenna","offer_id":32685256081511,"sku":"ANT-ADDON-1PANEL","price":149.0,"currency_code":"USD","in_stock":false},{"title":"1 Antenna \/ Dome Antenna","offer_id":40170212753511,"sku":"ANT-ADDON-1DOME","price":149.0,"currency_code":"USD","in_stock":true},{"title":"2 Antennas \/ Panel Antenna","offer_id":40170212786279,"sku":"ANT-ADDON-2PANEL","price":199.99,"currency_code":"USD","in_stock":true},{"title":"2 Antennas \/ Dome Antenna","offer_id":40170212819047,"sku":"ANT-ADDON-2DOME","price":199.99,"currency_code":"USD","in_stock":true},{"title":"3 Antennas \/ Panel Antenna","offer_id":40170212851815,"sku":"ANT-ADDON-3PANEL","price":249.99,"currency_code":"USD","in_stock":true},{"title":"3 Antennas \/ Dome Antenna","offer_id":40170212884583,"sku":"ANT-ADDON-3DOME","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/RSRFAdd-OnAntennaKit-1dome.jpg?v=1602263994"},{"product_id":"weboost-home-multiroom-add-on-antenna-kit","title":"weBoost Home Multiroom Add-On Antenna Kit","description":"\n\u003cp\u003eThe weBoost Home Multiroom Add-On Antenna Kit is a single panel antenna add-on kit for the weBoost \u003ca title=\"weBost Home Multiroom signal booster kit\" href=\"https:\/\/www.waveform.com\/products\/weboost-home-multiroom-470144\" target=\"_blank\"\u003eHome Multiroom\u003c\/a\u003e signal booster system.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for use with 75 ohm signal booster systems. 75 ohm signal boosters and cables use F-type connectors. This product is designed for the weBoost Home Multiroom but it is compatible with all other 75 ohm systems.\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/weboost-home-inside-antenna-314440?variant=39397917491303\"\u003eInside Fabric Panel Antenna (314440)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/wilson-wide-band-splitters?variant=967453845\"\u003e2-Way Splitter - 75 ohm F-Female Connectors (850034)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e2 ft RG6 Coax Jumper Cable (950602)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/wilson-rg6-coaxial-cable?variant=967454589\"\u003e30ft White RG6 Low-Loss Coax Cable (950630)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"weBoost","offers":[{"title":"Default Title","offer_id":32685307527271,"sku":"314440 + 850034 + 950602 + 950630","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/HomeMultiroomAdd-On_8ebfed58-f4f2-46c8-80f4-e45df6b0d56b.png?v=1680280389"},{"product_id":"rsrf-siso-dome-antenna","title":"Dome Antenna with 4.3-10-Female Connector, 600 - 6000 MHz","description":"\u003cp\u003eThe Waveform 4.3-10 Dome Antenna is a 5G-Ready, 600 to 6000 MHz, low PIM (-153 dBc) omnidirectional ceiling antenna for use in \u003ca href=\"https:\/\/www.waveform.com\/pages\/das-distributed-antenna-systems\"\u003edistributed antenna systems\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eKey specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.3-10-Female 50 Ohm Mini-DIN connector\u003c\/li\u003e\n\u003cli\u003e\nWideband 5G-ready: 600 - 6000 MHz\u003c\/li\u003e\n\u003cli\u003e-153 dBc low PIM\u003c\/li\u003e\n\u003cli\u003e2.5 - 5.5 dBi gain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":32832165609575,"sku":"ANT660-4310-DOME-LP","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/ANT660-4310-DOME-LP-01.jpg?v=1605032649"}],"url":"https:\/\/www.waveform.com\/collections\/antennas\/5g-antennas+das-antennas.oembed","provider":"Waveform","version":"1.0","type":"link"}