{"title":"Connectors and Adapters","description":"","products":[{"product_id":"wilson-coaxial-cable-connectors","title":"weBoost (Wilson) Coaxial Cable Connectors","description":"\u003cp\u003eweBoost (Wilson) makes a wide range of connectors for connecting amplifiers, cables and antennas. The connectors manufactured by Wilson here in the USA are of very high quality, resulting in very little signal loss to the system. The typical signal loss through one of these connectors is around 0.1dB.\u003c\/p\u003e\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eHere are a list of all the connectors available. If you are looking for barrel connectors (connectors where both sides are the same), then please see our barrel connector product page.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e971136: FME-Female to SMA-Female Connector\u003c\/li\u003e\n\u003cli\u003e971126: FME-Female to SMA-Female with 6 inch RG 174 Cable\u003c\/li\u003e\n\u003cli\u003e971125: FME-Female to SMA-Male with 6 inch RG 174 Cable\u003c\/li\u003e\n\u003cli\u003e971106: FME-Male to TNC-Male Barrel Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e971119: FME-Male to SMA-Male Connector\u003c\/li\u003e\n\u003cli\u003e971117: N-Female to N-Female Connector\u003c\/li\u003e\n\u003cli\u003e971107: N-Female to FME-Female Connector\u003c\/li\u003e\n\u003cli\u003e971108: N-Female to FME-Male Connector\u003c\/li\u003e\n\u003cli\u003e971128: N-Male to F-Female Connector\u003c\/li\u003e\n\u003cli\u003e971148: N-Male to N-Male Connector\u003c\/li\u003e\n\u003cli\u003e971151: F-Male to N-Female Connector\u003c\/li\u003e\n\u003cli\u003e971132: SMA-Male to N-Male Connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"weBoost","offers":[{"title":"FME-Female to SMA-Female (971136)","offer_id":1045045245,"sku":"971136","price":7.99,"currency_code":"USD","in_stock":true},{"title":"FME-Female to SMA-Female with 6 inch RG 174 Cable (971126)","offer_id":40170196959335,"sku":"971126","price":19.99,"currency_code":"USD","in_stock":true},{"title":"FME-Male to TNC-Male (971106)","offer_id":40170197024871,"sku":"971106","price":7.99,"currency_code":"USD","in_stock":true},{"title":"FME-Male to SMA-Male (971119)","offer_id":40170197090407,"sku":"971119","price":7.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to N-Female (971117)","offer_id":40170197123175,"sku":"971117","price":17.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to FME-Female (971107)","offer_id":40170197155943,"sku":"971107","price":7.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to FME-Male (971108)","offer_id":40170197188711,"sku":"971108","price":7.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to F-Female (971128)","offer_id":40170197221479,"sku":"971128","price":7.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to N-Male (971148)","offer_id":40170197254247,"sku":"971148","price":20.99,"currency_code":"USD","in_stock":true},{"title":"F-Male to N-Female (971151)","offer_id":40170197287015,"sku":"971151","price":17.99,"currency_code":"USD","in_stock":true},{"title":"SMA-Male to N-Male (971132)","offer_id":40170197319783,"sku":"971132","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/971151.jpg?v=1547674057"},{"product_id":"times-microwave-lmr-coaxial-cable-crimps","title":"Times Microwave LMR Coaxial Cable N-Type Crimps","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eWe also sell a lower-cost \u003ca href=\"\/products\/n-type-male-rsrf-coax-cable-crimps-for-rsrf-rs400-cable\"\u003eRSRF brand crimp for LMR 400 cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTimes Microwave offers a variety of crimp sizes. Coaxial crimps are ideal if you wish to make your own custom cable lengths. This can be useful if you need to reduce the length of an existing cable to reduce the signal loss in the system. \u003cbr\u003e\u003cbr\u003eAlternatively, you may have purchased a spool or long length of coaxial cable without connectors to assemble into multiple length cables. Cable crimps require a special crimp tool, which are available in our tools \u0026amp; accessories section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to install EZ-NMH-400 X connectors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; height: auto; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/a0nQFL3f22k\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eHere are a list of all the cable crimps available. Please make sure you have the correct crimp tool for your cable\/connector type. If you have any questions please contact us and we'll be happy to help.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEZ-400-NMH-X: N-Male Crimp for LMR400 Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEZ-600-NMH-X: N-Male Crimp for LMR600 Cable\u003c\/li\u003e\n\u003cli\u003eEZ-400-NMH-PL-X: N-Male Crimp for Plenum Rated LMR400 Cable\u003c\/li\u003e\n\u003cli\u003eEZ-600-NMH-PL-X: N-Male Crimp for Plenum Rated LMR600 Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEZ-240-NMH-X: N-Male Crimp for LMR240 Cable\u003c\/li\u003e\n\u003cli\u003eEZ-240-NF-X: N-Female Crimp for LMR240 Cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"Times Microwave","offers":[{"title":"N-Male Crimp for 400 Series Cable","offer_id":994370729,"sku":"EZ-400-NMH-X","price":23.0,"currency_code":"USD","in_stock":true},{"title":"N-Male Crimp for 600 Series Cable","offer_id":40170195386471,"sku":"EZ-600-NMH-X","price":27.0,"currency_code":"USD","in_stock":true},{"title":"N-Male Crimp for Plenum Rated 400 Series Cable","offer_id":40170195419239,"sku":"EZ-400-NMH-PL-X","price":20.0,"currency_code":"USD","in_stock":true},{"title":"N-Male Crimp for Plenum Rated 600 Series Cable","offer_id":40170195452007,"sku":"EZ-600-NMH-PL-X","price":32.0,"currency_code":"USD","in_stock":true},{"title":"N-Male Crimp for 240 Series Cable","offer_id":40170195484775,"sku":"EZ-240-NMH-X","price":19.0,"currency_code":"USD","in_stock":true},{"title":"N-Female Crimp for 240 Series Cable","offer_id":40170195517543,"sku":"EZ-240-NF-X","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Crimps.jpg?v=1476813238"},{"product_id":"surecall-coaxial-cable-connectors","title":"SureCall Coaxial Cable Connectors","description":"\u003cp\u003eSureCall makes a variety of connectors for connecting amplifiers, cables and antennas. The connectors manufactured by SureCall and are of very high quality, resulting in very little signal loss to the system. The typical signal loss through one of the connectors is around 0.1dB.\u003c\/p\u003e\n\u003ch2\u003eProduct Options\u003c\/h2\u003e\n\u003cp\u003eHere are a list of all the connectors available.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSC-CN-01: N-Female to N-Female Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-02: N-Male to SMA-Female Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-03: N-Male to FME-Female Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-04: N-Male to FME-Male Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-05: N-Male to SMA-Male Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-06: SMA-Male to FME-Male Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-07: N-Female to SMA-Male Cable Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-08: SMA-Male to FME-Female Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-09: N-Male Cable Crimp for SC400 Cable\u003c\/li\u003e\n\u003cli\u003eSC-CN-10: N-Female to FME-Female Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-11: N-Female to FME-Male Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-12: N-Male to N-Male Adapter\u003c\/li\u003e\n\u003cli\u003eSC-CN-13: FME-Female to SC240 Cable Crimp\u003c\/li\u003e\n\u003cli\u003eSC-CN-14: FME-Male to SC240 Cable Crimp\u003c\/li\u003e\n\u003cli\u003eSC-CN-15: N-Male to SC240 Cable Crimp\u003c\/li\u003e\n\u003cli\u003eSC-CN-16: N-Male Connector, 600 Cable\u003c\/li\u003e\n\u003cli\u003eSC-CN-17: FME-Female to SMA-Female Connector\u003c\/li\u003e\n\u003cli\u003eSC-CN-18: N-Male to F-Male Connector\u003c\/li\u003e\n\u003cli\u003eSC-CN-19: F-Female to F-Female Connector\u003c\/li\u003e\n\u003cli\u003eSC-CN-20: N-Male to F-Female Connector\u003c\/li\u003e\n\u003cli\u003eSC-CN-21: SMA-Male to MMCX-Male Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"SureCall","offers":[{"title":"N-Female to N-Female Connector","offer_id":1050627065,"sku":"SC-CN-01","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to SMA-Female Connector","offer_id":40170200465511,"sku":"SC-CN-02","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to FME-Female Connector","offer_id":40170200498279,"sku":"SC-CN-03","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to FME-Male Connector","offer_id":40170200531047,"sku":"SC-CN-04","price":12.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to SMA-Male Connector","offer_id":40170200563815,"sku":"SC-CN-05","price":9.99,"currency_code":"USD","in_stock":true},{"title":"SMA-Male to FME-Male Connector","offer_id":40170200596583,"sku":"SC-CN-06","price":8.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to SMA-Male Pigtail Cable","offer_id":40170200629351,"sku":"SC-CN-07","price":12.99,"currency_code":"USD","in_stock":true},{"title":"SMA-Male to FME-Female Connector","offer_id":40170200662119,"sku":"SC-CN-08","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Male Cable Crimp for SC400 Cable","offer_id":40170200694887,"sku":"SC-CN-09","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to FME-Female Connector","offer_id":40170200727655,"sku":"SC-CN-10","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Female to FME-Male Connector","offer_id":40170200760423,"sku":"SC-CN-11","price":9.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to N-Male Connector","offer_id":40170200793191,"sku":"SC-CN-12","price":9.99,"currency_code":"USD","in_stock":true},{"title":"FME Female to SC240 Cable Crimp","offer_id":40170200825959,"sku":"SC-CN-13","price":12.99,"currency_code":"USD","in_stock":true},{"title":"FME-Male to SC240 Cable Crimp","offer_id":40170200858727,"sku":"SC-CN-14","price":12.99,"currency_code":"USD","in_stock":true},{"title":"N-Male to SC240 Cable Crimp","offer_id":40170200891495,"sku":"SC-CN-15","price":12.99,"currency_code":"USD","in_stock":true},{"title":"N Male Connector, 600 Cable","offer_id":40170200924263,"sku":"SC-CN-16","price":12.99,"currency_code":"USD","in_stock":true},{"title":"FME Female to SMA Female Connector","offer_id":40170200957031,"sku":"SC-CN-17","price":11.99,"currency_code":"USD","in_stock":true},{"title":"N Male to F Male Connector","offer_id":40170200989799,"sku":"SC-CN-18","price":12.99,"currency_code":"USD","in_stock":true},{"title":"F Female to F Female Connector","offer_id":40170201022567,"sku":"SC-CN-19","price":12.99,"currency_code":"USD","in_stock":true},{"title":"N Male to F Female Connector","offer_id":40170201055335,"sku":"SC-CN-20","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/sc-cn-01.jpg?v=1525812065"},{"product_id":"commscope-cable-connectors","title":"CommScope N-Male Positive-Stop Connectors for 1\/2\" HELIAX Cables (L4TNM-PSA)","description":"\u003cp\u003eEase connector attachment issues and ensure excellent RF transmission line performance with these CommScope N-Male Positive-Stop connector for CommScope's 1\/2\" LDF4-50A, HL4RPV-50, and AL4RPV-50 cables.\u003c\/p\u003e\n\u003cp\u003eThese connectors are for HELIAX corrugated coaxial cables. They require \u003cstrong\u003eno special tools\u003c\/strong\u003e or torque wrenches, eliminating both guess work and time consuming measurements.\u003c\/p\u003e\n\u003cp\u003eUsing standard wrenches and in less than one rotation, they give the installer a \u003cstrong\u003eclear visual and mechanical verification of a correct fit\u003c\/strong\u003e, sealing out water and sealing in excellent electrical performance. \u003c\/p\u003e\n\u003cp\u003eCommScope Positive-Stop Connectors are \u003cstrong\u003ewaterproof\u003c\/strong\u003e, even unmated.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cp\u003eThe easy verification eliminates the need to control torque levels and provides consistent attachment integrity and electrical performance.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo special tools required\u003c\/li\u003e\n\u003cli\u003eFull tightens in less than one rotation\u003c\/li\u003e\n\u003cli\u003eVisual and mechanical fit verification\u003c\/li\u003e\n\u003cli\u003eIntegrated sealing mechanism\u003c\/li\u003e\n\u003cli\u003eFaster, easier installation\u003c\/li\u003e\n\u003cli\u003eExcellent electrical performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CommScope","offers":[{"title":"Default Title","offer_id":4488038721,"sku":"L4TNM-PSA","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Connector_I_1024x1024_6702f18f-4974-4f2a-ac07-20dcfb501d1a.jpg?v=1476730758"},{"product_id":"n-style-plug-hex-head-for-tws-400-cable","title":"Waveform N-Style Plug Hex Head for TWS-400 Cable","description":"\n\u003cp\u003eThis is an N-Style Plug (Male) Connector from Ventev TerraWave Solutions. It is designed for use with Ventev TWS 400 Series Plenum Cable.\u003c\/p\u003e\n\u003cp\u003eThe connector has a Hex Head Style and a captivated center pin. No soldering is required.\u003c\/p\u003e","brand":"Ventev Terrawave","offers":[{"title":"Default Title","offer_id":32158337354,"sku":"CON-07-400-CP-HEX","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/348407_CON-07-400-EZ-HEXl.jpg?v=1476302469"},{"product_id":"n-female-to-qma-female-adapter","title":"Waveform N-Female to QMA-Female Adapter","description":"\u003cp\u003eThis nickel-plated coaxial adapter has an QMA-Female connector opposite a N-Female connector.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":43927708810,"sku":"ADT-NF-QMAF","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/3805_1.jpg?v=1550091600"},{"product_id":"rsrf-sma-male-to-n-female-adapter","title":"Waveform SMA-Male to N-Female Pigtail Adapter","description":"\u003cp\u003eWe tried a lot of different pigtail adapters before deciding that none of them were good enough and started making our own instead. \u003c\/p\u003e\n\u003cp\u003eThese SMA-Male to N-Female adapters use high-quality semi-flexible cable that is durable and strong, with minimal insertion loss. Unlike most other adapters, our pigtail adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eWe tested both harder and softer cable and decided our RG142 cable achieved the right balance of durability but also flexibility, for SMA connectors.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSMA-Male to N-Female connector\u003c\/li\u003e\n\u003cli\u003e20 cm (8 inch) RG142 cable with 1.8mm cable diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated solid brass center conductor, PTFE dielectric, and an copper-colored FEP jacket\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 88 dB shielding\u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.2 for use at frequencies of up to 6 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":46085742346,"sku":"PTA-SMAM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/RSPT-SMAM-NF-Jumper.jpg?v=1597794051"},{"product_id":"2watt-n-male-50-ohm-termination-load","title":"Bird Technologies 2 Watt N-Male 50 Ohm Termination Load","description":"\u003cp\u003eTermination load - rated for 2W from 0 to 4 GHz frequencies.\u003c\/p\u003e\n\n\u003ctable class=\"specTable\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"specHead\"\u003e\n\u003cth colspan=\"2\"\u003eTermination\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"a\"\u003e\n\u003ctd class=\"code\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd class=\"value\"\u003eN-Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"b\"\u003e\n\u003ctd class=\"code\"\u003eDimensions\u003c\/td\u003e\n\u003ctd class=\"value\"\u003e1.26\" (L) x 0.48\" (Dia)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"specHead\"\u003e\n\u003cth colspan=\"2\"\u003eTermination Spec Info 1\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"a\"\u003e\n\u003ctd class=\"code\"\u003eFrequency vs. VSWR\u003c\/td\u003e\n\u003ctd class=\"value\"\u003eDC - 1 GHz @ 1.10:1 max ~ 1 GHz - 6 GHz @ 1.25:1 max (N-Type), 1 GHz - 4 GHz @ 1.25:1 max (BNC \u0026amp; TNC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"b\"\u003e\n\u003ctd class=\"code\"\u003eWarranty\u003c\/td\u003e\n\u003ctd class=\"value\"\u003e1 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"specHead\"\u003e\n\u003cth colspan=\"2\"\u003eTermination Spec Info 2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"a\"\u003e\n\u003ctd class=\"code\"\u003eImpedance\u003c\/td\u003e\n\u003ctd class=\"value\"\u003e50 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"b\"\u003e\n\u003ctd class=\"code\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"value\"\u003e0.12 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eBird's Calibrated Mismatch Loads are recognized for their high-quality, robust construction and conservative power ratings. The use of non-magnetic materials and plating provide safety when used in high magnetic fields.\u003c\/p\u003e","brand":"Bird Technologies","offers":[{"title":"Default Title","offer_id":4951039311901,"sku":"2-T-MN","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/2-t.jpg?v=1539191644"},{"product_id":"n-type-male-rsrf-coax-cable-crimps-for-rsrf-rs400-cable","title":"Waveform N-Male RS400 Coax Cable Crimps","description":"\u003cp\u003eThis N-Type Plug Male Connector from Waveform is a drop-in replacement for the Times Microwave \u003ca href=\"\/products\/times-microwave-lmr-coaxial-cable-crimps\"\u003eEZ-400-NMH-X\u003c\/a\u003e and \u003ca href=\"\/products\/times-microwave-lmr-coaxial-cable-crimps?variant=994426877\"\u003eEZ-400-NMH-PL-X\u003c\/a\u003e crimps. It is designed for use with all types of 400 Series Coaxial Cable, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rsrf-rs400-coaxial-cable-500-ft-reel\"\u003eRSRF RS400 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/surecall-cm400-ultra-low-loss-coaxial-cable\"\u003eSurecall SC400 cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wilson400-coaxial-cable\"\u003eWilson400 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/times-microwave-3-8-lmr-400-series-coaxial-cable\"\u003eTimes Microwave LMR-400 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lmr-400-coax\"\u003eTimes Microwave Plenum LMR-400 LMR-400LL-PL Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ventev-tws-400-p-plenum-coaxial-cable\"\u003eVentev Terrawave Plenum 400 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe connector has a captivated center pin, making installation extra-simple. No soldering is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend the following tools for use with these RS400 crimps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rsrf-lmr-400-crimp-tool\"\u003eRSRF 400 Crimp Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/times-microwave-all-in-one-combination-coaxial-prep-tools\"\u003eTimes Microwave 400 Prep Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":5373997121565,"sku":"RS400-NM-CRIMP","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00195-2.jpg?v=1678287282"},{"product_id":"rsrf-n-male-to-n-male-connector","title":"Waveform N-Male to N-Male \"Barrel\" Adapter","description":"\u003cp\u003eThese N-Male to N-Male barrel adapters use high-quality brass and bronze alloys, making them durable and strong, with minimal insertion loss.\u003c\/p\u003e\n\u003cp\u003eThis adapter is often used for connecting antennas to LTE routers in a temporary setup while testing our legacy 2x2 MIMO \u003ca href=\"http:\/\/waveform.com\/2x2-panel-kit\" data-mce-href=\"http:\/\/waveform.com\/2x2-panel-kit\"\u003ePanel\u003c\/a\u003e\/\u003ca href=\"http:\/\/waveform.com\/2x2-LP-kit\" data-mce-href=\"http:\/\/waveform.com\/2x2-LP-kit\"\u003eLog Periodic\u003c\/a\u003e and legacy 4x4 MIMO \u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"http:\/\/waveform.com\/4x4-panel-kit\"\u003ePanel\u003c\/a\u003e\/\u003ca href=\"http:\/\/waveform.com\/4x4-LP-kit\" data-mce-href=\"http:\/\/waveform.com\/4x4-LP-kit\"\u003eLog Periodic\u003c\/a\u003e Antenna Kits.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Male to N-Male connector\u003c\/li\u003e\n\u003cli\u003e32 mm (1.25 inch) long with 20 mm (0.78 inch) diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a plated brass body\u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.3 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":12893850206311,"sku":"ADT-NM-NM","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/MG_7976-17.jpg?v=1641826913"},{"product_id":"rsrf-n-female-to-n-female-connector","title":"Waveform N-Female to N-Female \"Bullet\" Adapter","description":"\u003cp\u003eThis is a high-quality alloy N-Female to N-Female 50 ohm bullet adapter.\u003c\/p\u003e\n\u003cp\u003e\n  This adapter is useful for joining two N-Male cables together. If you wish to\n  extend a cable run with N-Male cables, the N-Female bullet adapter can be used\n  to attach them.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  These N-Female to N-Female bullet adapters use high-quality brass and bronze\n  alloys, making them durable and strong, with minimal insertion loss.\n\u003c\/p\u003e\n\u003cp\u003e\n  This adapter is often used for joining two cables, or extending existing\n  N-type cable runs.\n\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eN-Female to N-Female connector\u003c\/li\u003e\n  \u003cli\u003e32 mm (1.25 inch) long with 20 mm (0.78 inch) diameter\u003c\/li\u003e\n  \u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n  \u003cli\u003e\n    Gold-plated bronze center conductor, PTFE dielectric, and a plated brass\n    body\n  \u003c\/li\u003e\n  \u003cli\u003eVSWR rated below 1.3 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":12893852794983,"sku":"ADT-NF-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00222.jpg?v=1540492633"},{"product_id":"rsrf-3db-hybrid-coupler-2x2","title":"Waveform N-Female 2x2 Hybrid Coupler (3 dB), 698 - 2700 MHz","description":"\u003cp\u003eThe Waveform 2x2 N-Female Hybrid Coupler is a low PIM, low VSWR coupler. It works on a wideband 698 - 2700 MHz frequency range.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm coupler with N-Female connectors.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":15401236430951,"sku":"HYCPL727NF-3","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/HYCPL727NF-3-01.jpg?v=1605118354"},{"product_id":"rsrf-qma-m-to-n-f-adapter","title":"Waveform QMA-M to N-F Adapter","description":"This is a QMA-Male to N-Female pigtail adapter.","brand":"Waveform","offers":[{"title":"Default Title","offer_id":19841098448999,"sku":"PTA-QMAM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00353x1024.jpg?v=1552397695"},{"product_id":"rsrf-right-angle-qma-m-to-n-f-adapter","title":"Waveform Right Angle QMA-Male to N-Female Pigtail Adapter","description":"\u003cp\u003eThis is a right-angle QMA-Male to N-Female pigtail adapter.\u003c\/p\u003e\n\u003cp\u003eThese adapters use high-quality RG142 cable that is durable and strong, and unlike most other adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eThis is a 50 Ohm impedance adapter (both N-type and QMA connectors are 50-ohm connectors). \u003c\/p\u003e\n\u003cp\u003eThe RG142 cable we use is double-shielded with silver-plated copper braid for maximum protection and performance. The 0.037 inch inner conductor is made of copper-clad steel with silver plating, and the inner dielectric is made from PTFE, while the jacket is a tan-colored fluorinated ethylene propylene (FEP).\u003c\/p\u003e\n\u003cp\u003eThe high quality materials allow for greater than 88 dB shielding, and this high quality adapter is rated for use at frequencies of up to 6GHz.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":19841134526567,"sku":"PTA-RAQMAM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00576x1024.jpg?v=1552398554"},{"product_id":"rsrf-n-male-to-n-female-right-angle-connector","title":"Waveform Right Angle N-Male to N-Female Adapter","description":"\u003cp\u003eThis adapter is useful for alleviating sharp bends at connections in N-type cable paths. If you wish to reduce the bending stress on a cable run with N-type cables, the Right Angle N-Male to N-Female Adapter can be used.\u003cbr\u003e\u003cbr\u003eThese Right Angle N-Male to N-Female Adapters use high-quality brass and bronze alloys, making them durable and strong, with minimal insertion loss. The angle is 90°. It has an impedance of 50 ohm.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":20324265689191,"sku":"ADT-RA-NM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/MG_7979-20.jpg?v=1556133272"},{"product_id":"l4hm-d-4-3-10-male-connector","title":"CommScope L4HM-D 4.3-10 Male Connector","description":"\u003cp\u003eThis is a 4.3-10 Male wireless connector. It is a 50 ohm connector that operates on all cellular frequencies from 0 - 8800 MHz.\u003c\/p\u003e\n\u003cp\u003eThe L4HM-D fits 0.5 inch AL4RPV-50, LDF4-50A, HL4RPV-50 cable. The maximum VSWR is 1.11:1. The outer contact plating is trimetal and the inner contact plating is silver. \u003c\/p\u003e","brand":"CommScope","offers":[{"title":"Default Title","offer_id":20599386701927,"sku":"L4HM-D","price":25.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/l4hm-d.jpg?v=1556138232"},{"product_id":"l4tnf-psa-n-female-positive-stop","title":"CommScope N-Female Positive-Stop Connectors for 1\/2\" HELIAX Cables (L4TNF-PSA)","description":"\n\u003cp\u003eEase connector attachment issues and ensure excellent RF transmission line performance with these CommScope N-Female Positive-Stop connector for  CommScope's 1\/2\" LDF4-50A, HL4RPV-50, and AL4RPV-50 cables.\u003c\/p\u003e\n\u003cp\u003eIt is a straight connector with 50 ohm impedance. It has a ring flare attachment with self captivated silver plated center pin and a tri-metal plated body. It operates on frequency bands from 0 - 8800 MHz.\u003c\/p\u003e\n\u003cp\u003eThese connectors are for HELIAX corrugated coaxial cables. They require \u003cstrong\u003eno special tools\u003c\/strong\u003e or torque wrenches, eliminating both guess work and time consuming measurements.\u003c\/p\u003e\n\u003cp\u003eUsing standard wrenches and in less than one rotation, they give the installer a \u003cstrong\u003eclear visual and mechanical verification of a correct fit\u003c\/strong\u003e, sealing out water and sealing in excellent electrical performance.\u003c\/p\u003e\n\u003cp\u003eCommScope Positive-Stop Connectors are \u003cstrong\u003ewaterproof\u003c\/strong\u003e, even unmated. It is 2.9\" long and 0.88\" in diameter.\u003c\/p\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cp\u003eThe easy verification eliminates the need to control torque levels and provides consistent attachment integrity and electrical performance.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo special tools required\u003c\/li\u003e\n\u003cli\u003eFull tightens in less than one rotation\u003c\/li\u003e\n\u003cli\u003eVisual and mechanical fit verification\u003c\/li\u003e\n\u003cli\u003eIntegrated sealing mechanism\u003c\/li\u003e\n\u003cli\u003eFaster, easier installation\u003c\/li\u003e\n\u003cli\u003eExcellent electrical performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CommScope","offers":[{"title":"Default Title","offer_id":20661180924007,"sku":"L4TNF-PSA","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/L4TNF-PSA1.jpg?v=1556824846"},{"product_id":"microlab-ja-10mx-jumper-cable-0-141-length-1-0-m-coaxial-pim-158-dbc-straight-4-3-10-male-to-straight-4-3-10-male","title":"Microlab Plenum Low-PIM 4.3-10-Male Jumper Cable (JA-10MX)","description":"\u003cp\u003eThe Microlab JA-10MX Jumper Cable is a .141 Rigid Type, 4.3-10-Male to 4.3-10-Male, PIM Jumper Cable. It is 1 meter in length.\u003c\/p\u003e\n\u003cp\u003eThe Microlab JA series Coaxial Jumper Cables are built for reliability and low-PIM performance. PIM, or passive intermodulation, is a form of distortion that occurs in devices like antennas as a result of nonlinearities in the system. \u003cbr\u003e\u003cbr\u003eHigher PIM can be caused by dissimilar materials, design flaws, or corrosion by weather or age. PIM can cause significant disruption to system performance. The JA-10MX ensures good intermodulation performance via a combination of controlled manufacture, low PIM cable, and tri-metal plated connectors.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-Low PIM \u0026lt;-158 dBc\u003c\/li\u003e\n\u003cli\u003eHigh Average Power Rating\u003c\/li\u003e\n\u003cli\u003eMinimal RF Insertion Loss\u003c\/li\u003e\n\u003cli\u003eExcellent VSWR\u003c\/li\u003e\n\u003cli\u003eRugged, High Reliability\u003c\/li\u003e\n\u003cli\u003e4.3-10-Male Connectors\u003c\/li\u003e\n\u003cli\u003ePlenum-rated Class CMP RoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Microlab","offers":[{"title":"Default Title","offer_id":20894540267623,"sku":"JA-10MX","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/ja-10mz_base_1024x1024_6ca989b6-2e40-4c48-80a9-06aae7173fc0.jpg?v=1585511458"},{"product_id":"microlab-3x3-hybrid-couple-cm-80n","title":"Microlab 3x3 Hybrid Coupler (CM-80N)","description":"\n\u003cp\u003eThe Microlab CM-80N is a 3x3 hybrid coupler with N female connectors. The coupler connects 3 inputs to 3 outputs with minimal interaction and PIM (intermodulation).\u003c\/p\u003e\n\u003cp\u003eHybrid couplers are used to combine wireless carriers in the band to a single antenna feed or distribution cable. In DAS applications, all three outputs may be used to feed different cables, essentially providing lossless combining. Any unused ports must be terminated in 50Ω and results in a 4.8 dB loss in each signal. \u003c\/p\u003e\n\u003cp\u003eThis is a low PIM coupler \u0026lt;-150 dBc (2 x +43 dBm tones). It has N-female connectors.\u003c\/p\u003e\n\n","brand":"Microlab","offers":[{"title":"Default Title","offer_id":29498497925223,"sku":"CM-80N","price":594.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Microlab-CM-81N.jpg?v=1569358492"},{"product_id":"rsrf-sma-male-to-n-male-pigtail-adapter","title":"Waveform SMA-Male to N-Male Pigtail Adapter","description":"\u003cp\u003eWe tried a lot of different SMA-Male to N-Male adapters before deciding that none of them were good enough and started making our own instead. These adapters use high-quality RG142 cable that is durable and strong, and unlike most other adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eThis is a 50 Ohm impedance adapter (both N-type and SMA connectors are 50-ohm connectors). \u003c\/p\u003e\n\u003cp\u003eThe RG142 cable we use is double-shielded with silver-plated copper braid for maximum protection and performance. The 0.037 inch inner conductor is made of copper-clad steel with silver plating, and the inner dielectric is made from PTFE, while the jacket is a tan-colored fluorinated ethylene propylene (FEP).\u003c\/p\u003e\n\u003cp\u003eThe high quality materials allow for greater than 88 dB shielding, and this high quality adapter is rated for use at frequencies of up to 6GHz.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":30214015713383,"sku":"PTA-SMAM-NM","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/PTA-SMAM-NM-SMA-to-N-Male-Pigtail-Adapter_ALT_1024x1024_521a6d13-7774-416c-aba8-1b338fe696f0.png?v=1666127853"},{"product_id":"rsrf-ts9-male-to-n-female-pigtail-adapter","title":"Waveform TS9-Male to N-Female Pigtail Adapter","description":"\u003cp\u003eWe tried a lot of different pigtail adapters before landing on this design for our TS9 adapters. \u003c\/p\u003e\n\u003cp\u003eThese TS9-Male to N-Female adapters use high-quality RS100 semi-flexible cable that is durable and strong, with minimal insertion loss. Unlike most other adapters, our pigtail adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eWe tested both harder and softer cable and decided our RS100 cable achieved the right balance of durability but also flexibility, for TS9 connectors.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Female to TS9-Male connector\u003c\/li\u003e\n\u003cli\u003e30 cm (12 inch) LMR100 cable with 2.8mm cable diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a black PE jacket.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 90 dB shielding, \u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.25 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Note About TS9 Connectors:\u003c\/h2\u003e\n\u003cp\u003eTS9 is unfortunately not a standardized connector. TS9 ports on different routers are all slightly different lengths. They also don't have any physical \"coupling\", so it can be difficult to get a good fit. We tested a lot of designs to find one that worked well with every device. Unfortunately, it's not perfect for any one device. If yours become a bit loose, simply squeeze them lightly with your fingers and they will grip more firmly.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":30214074335335,"sku":"PTA-100-TS9M-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/ts9_pigtail_coiled_1024x1024_46568b34-e813-414a-8159-82214172f095.png?v=1626296779"},{"product_id":"ventev-n-male-plug-for-240-cable","title":"Ventev N Male\/Plug for 240 Cable","description":"\u003cp\u003eThe Ventev N Male\/Plug for 240 Cable is a straight-style connector. It is compatible with all 240-type cable. \u003c\/p\u003e\n\u003cp\u003eIt has 50 ohm impedance and N-Male connectors.\u003c\/p\u003e","brand":"Ventev Terrawave","offers":[{"title":"Default Title","offer_id":31164851388519,"sku":"373491","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/308605.jpg?v=1573169682"},{"product_id":"rsrf-6db-hybrid-coupler-4x4","title":"Waveform N-Female 4x4 Hybrid Coupler (6 dB), 698 - 2700 MHz","description":"\u003cp\u003eThe Waveform 4x4 N-Female Hybrid Coupler is a low PIM, low VSWR coupler. It works on a wideband 698-2700MHz frequency range.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 ohm coupler with N-Female connectors.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":32832190414951,"sku":"HYCPL727NF-4x4","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/HYCPL727NF-4-01.jpg?v=1605118532"},{"product_id":"right-angle-sma-male-to-n-female-pigtail-adapter","title":"Waveform Right Angle SMA-Male to N-Female Pigtail Adapter","description":"\n\u003cp\u003eAfter we had tried many different pigtail adapters from other companies and  found that none of them were able to meet our standards, we decided to make our very own pigtail adapters!\u003c\/p\u003e\n\u003cp\u003eUnlike most other adapters, these Right Angle SMA-Male to N-Female adapters use high-quality semi-flexible cable that is durable and strong, with minimal insertion loss. Our pigtail adapters won't fall apart during installation. \u003c\/p\u003e\n\u003cp\u003eWe tested both harder and softer cable and decided our RG142 cable achieved the right balance of durability but also flexibility for SMA connectors.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRight Angle SMA-Male to N-Female connector\u003c\/li\u003e\n\u003cli\u003e20 cm (8 inch) RG142 cable with 1.8mm cable diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated solid brass center conductor, PTFE dielectric, and an copper-colored FEP jacket.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 88 dB shielding, \u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.2 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39303210336359,"sku":"PTA-RASMAM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC02294_edit_1024x_2f4d4620-4d0c-4146-8bcc-e59e08218019.png?v=1660746883"},{"product_id":"rsrf-u-fl-male-to-n-female-pigtail-adapter","title":"Waveform U.FL to N-Female Pigtail Adapter","description":"\u003cp\u003eWe've tried a lot of different pigtail adapters before deciding that none of them were good enough and started making our own instead. \u003c\/p\u003e\n\u003cp\u003eThese U.FL to N-Female adapters use high-quality RG178 semi-flexible cable that is durable and strong, with minimal insertion loss. Unlike most other adapters, our pigtail adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eWe tested both harder and softer cable and decided our RG178 cable achieved the right balance of durability but also flexibility, for U.FL connectors.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Female to U.FL-Female connector\u003c\/li\u003e\n\u003cli\u003e30 cm (12 inch) RG178 cable with 1.8mm cable diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and an orange PE jacket.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 40 dB shielding\u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.30 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eU.FL is also referred to as IPEX MHF1, IPX, AMC, or UMCC.\u003c\/em\u003e\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39342753054823,"sku":"PTA-UFLM-NF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC02567-Edit_1024x_69f5d101-b0a4-4964-9096-1f7c66f2d6c0.jpg?v=1680193163"},{"product_id":"rsrf-n-male-to-f-female-adapter","title":"Waveform N-Male to F-Female Adapter","description":"\u003cp\u003eThis is a high-quality alloy, 50 Ohm N-Male to 75 Ohm F-Female barrel style adapter. Made using high-grade nickel-plated brass, with a gold-plated center conductor.\u003c\/p\u003e\n\u003cp\u003eThis adapter is useful when combining 50 Ohm and 75 Ohm hardware in a signal booster system.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39354024099943,"sku":"ADT-NM-FF","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/ADT-NM-FF_-_F-female_side_1_1024x1024_cac65916-25b0-4311-ab7b-879d74a22691.png?v=1622059040"},{"product_id":"waveform-n-male-to-sma-male-adapter","title":"Waveform N-Male to SMA-Male Adapter","description":"\u003cp\u003eThese N-Male to SMA-Male barrel adapters use high-quality brass and bronze alloys, making them durable and strong, with minimal insertion loss.\u003c\/p\u003e\n\u003cp\u003eThis adapter is often used for connecting antennas directly to LTE routers in a temporary setup while testing \u003cmeta charset=\"utf-8\"\u003eour legacy 2x2 MIMO \u003ca href=\"http:\/\/waveform.com\/2x2-panel-kit\" data-mce-href=\"http:\/\/waveform.com\/2x2-panel-kit\"\u003ePanel\u003c\/a\u003e\/\u003ca href=\"http:\/\/waveform.com\/2x2-LP-kit\" data-mce-href=\"http:\/\/waveform.com\/2x2-LP-kit\"\u003eLog Periodic\u003c\/a\u003e and legacy 4x4 MIMO \u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"http:\/\/waveform.com\/4x4-panel-kit\"\u003ePanel\u003c\/a\u003e\/\u003ca href=\"http:\/\/waveform.com\/4x4-LP-kit\" data-mce-href=\"http:\/\/waveform.com\/4x4-LP-kit\"\u003eLog Periodic\u003c\/a\u003e Antenna Kits.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Male to SMA-Male connector\u003c\/li\u003e\n\u003cli\u003e32 mm (1.25 inch) long with 20 mm (0.78 inch) diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a plated brass body\u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.3 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39612007841895,"sku":"ADT-NM-SMAM","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Fullview.png?v=1643064225"},{"product_id":"waveform-sma-female-to-ts9-male-pigtail-adapter","title":"Waveform SMA-Female to TS9-Male Pigtail Adapter","description":"\u003cp\u003eWe've tried a lot of different pigtail adapters before deciding that none of them were good enough and started making our own instead. \u003c\/p\u003e\n\u003cp\u003eThese TS9-Male to SMA-Female adapters use high-quality RS100 semi-flexible cable that is durable and strong, with minimal insertion loss. Unlike most other adapters, our pigtail adapters won't fall apart during installation.\u003c\/p\u003e\n\u003cp\u003eWe tested both harder and softer cable and decided our RS100 cable achieved the right balance of durability but also flexibility, for TS9 connectors.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSMA-Female to TS9-Male connector\u003c\/li\u003e\n\u003cli\u003e30 cm (12 inch) LMR100 cable with 2.8mm cable diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a black PE jacket.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 90 dB shielding, \u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.25 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Note About TS9 Connectors:\u003c\/h2\u003e\n\u003cp\u003eTS9 is unfortunately not a standardized connector. TS9 ports on different routers are all slightly different lengths. They also don't have any physical \"coupling\", so it can be difficult to get a good fit. We tested a lot of designs to find one that worked well with every device. Unfortunately, it's not perfect for any one device. If yours become a bit loose, simply squeeze them lightly with your fingers and they will grip more firmly.\u003c\/p\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39612010135655,"sku":"PTA-SMAF-TS9M","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/IMG_0660-removebg.png?v=1677878625"},{"product_id":"n-female-to-sma-female-adapter","title":"Waveform N-Female to SMA-Female Adapter","description":"\u003cp\u003eThis N-Female to SMA-Female adapter uses high-quality brass and bronze alloys, making it durable and strong, with minimal insertion loss.\u003c\/p\u003e\n\u003cp\u003eThis adapter is often placed between an N-Male cable and SMA-Male cable to connect and extend an existing cable path.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Female to SMA-Female connector\u003c\/li\u003e\n\u003cli\u003e29.6 mm (1.16 inch) long with 15.7 mm (0.62 inch) diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a plated brass body \u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.3 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39979690950759,"sku":"ADT-NF-SMAF","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Profileview.png?v=1671479620"},{"product_id":"sma-female-to-u-fl-pigtail-adapter-v2","title":"Waveform SMA-Female to U.FL Pigtail Adapter (4-pack)","description":"\u003cp\u003eThe Waveform U.FL to SMA-Female Pigtail adapter uses a high-quality 1.13mm flexible cable that is both durable and strong, while providing minimal insertion loss.\u003c\/p\u003e\n\u003cp\u003eThis Waveform U.FL to SMA-Female Pigtail adapter replaces our earlier \u003ca href=\"https:\/\/www.waveform.com\/products\/waveform-sma-female-to-u-fl-pigtail-adapter\"\u003eSMA-Female to U.FL Pigtail Adapter\u003c\/a\u003e. It's thinner 1.13 cable and improved U.FL connector allows for easier overall installation experience.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSMA-Female to U.FL-Female connectors\u003c\/li\u003e\n\u003cli\u003e30 cm (12 inch) cable with 1.13mm diameter cable type\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eGold-plated brass connectors, PTFE cable dielectric, and an black FEP cable jacket.\u003c\/li\u003e\n\u003cli\u003eVSWR rated below 1.25 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eU.FL is also referred to as IPEX MHF1, IPX, AMC, or UMCC.\u003c\/em\u003e\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44448480886887,"sku":"PTA-SMAF-UFL-V2-4","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/IMG_3430-Edit.jpg?v=1679936926"},{"product_id":"hybrid-coupler-640","title":"Waveform N-Female Hybrid Couplers (2x2, 3x3 and 4x4), 600 - 4200 MHz","description":"\u003cp\u003eThe Waveform Hybrid Couplers are a low PIM, low VSWR coupler. It works on a wideband 600-4200 MHz frequency range.\u003c\/p\u003e\n\u003cp\u003eIt is a 50 Ohm coupler with N-Female connectors.\u003c\/p\u003e\n\u003cp\u003eThe Waveform Hybrid Couplers are most frequently used to connect a single set of indoor antennas to multiple independent cell phone signal boosters.\u003c\/p\u003e\n\u003cp\u003eThe most common use case we see is using multiple \u003ca href=\"https:\/\/www.waveform.com\/products\/cel-fi-go-x\"\u003eCel-Fi GO X\u003c\/a\u003e boosters (a single-carrier cell phone booster) to provide coverage for multiple carriers over a single set of indoor antennas. This way each antenna broadcasts each carrier, for maximum coverage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: If any ports on a hybrid coupler are left unused, we offer the \u003ca href=\"https:\/\/www.waveform.com\/products\/2watt-n-male-50-ohm-termination-load\" target=\"_blank\"\u003eN-Male 50 Ohm Termination Load\u003c\/a\u003e to cover the unused ports and reduce signal interference.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e600 - 4200 MHz Frequency Range\u003c\/li\u003e\n\u003cli\u003e50 Ohm Impedance\u003c\/li\u003e\n\u003cli\u003eN-Female Connectors\u003c\/li\u003e\n\u003cli\u003eMore than 20 dB Isolation\u003c\/li\u003e\n\u003cli\u003eUltra-low PIM at ≤ -153 dBc\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"2x2 Hybrid Coupler (3 dB)","offer_id":41226064265319,"sku":"HYCPL640NF-2x2","price":198.0,"currency_code":"USD","in_stock":true},{"title":"3x3 Hybrid Coupler (4.8 dB)","offer_id":41226064298087,"sku":"HYCPL640NF-3x3","price":349.99,"currency_code":"USD","in_stock":true},{"title":"4x4 Hybrid Coupler (6 dB)","offer_id":41332766802023,"sku":"HYCPL640NF-4x4","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/2x2-Hybrid-Coupler_8ca21a36-3e5f-48d3-823b-48d2d66c2a29.png?v=1755880060"},{"product_id":"n-male-rs600-coax-cable-crimps","title":"Waveform N-Male RS600\/LMR-600 Coax Cable Crimps","description":"This N-Type Plug Male Connector from Waveform is a drop-in replacement for the Times Microwave \u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-lmr-coaxial-cable-crimps?variant=994370737\" target=\"_blank\"\u003eEZ-600-NMH-X\u003c\/a\u003e and \u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-lmr-coaxial-cable-crimps?variant=994429341\" target=\"_blank\"\u003eEZ-600-NMH-PL-X\u003c\/a\u003e crimps. It is designed for use with all types of 600 Series Coaxial Cable, including:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/rsrf-rs600-coaxial-cable-500ft-reel\" target=\"_blank\"\u003eRSRF RS600 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-lmr600-series-coaxial-cable\" target=\"_blank\"\u003eTimes Microwave LMR-600 Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-plenum-rated-1-2-lmr-600-series-coaxial-cable\" target=\"_blank\"\u003eTimes Microwave Plenum LMR-600LL-PL Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe connector has a captivated center pin, making installation extra simple. No soldering is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend the following tools for use with these RS600 crimps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-crimp-tool-for-lmr600-connectors\" target=\"_blank\"\u003eTimes Microwave 600 Crimp Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/products\/times-microwave-all-in-one-combination-coaxial-prep-tools?variant=996693741\" target=\"_blank\"\u003eTimes Microwave 600 Prep Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40109909999719,"sku":"RS600-NM-CRIMP","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/DSC00195-2.png?v=1684450454"},{"product_id":"low-pim-4-3-10-jumper","title":"Waveform Low-PIM 4.3-10 Jumper Cable","description":"\u003cp\u003eWaveform’s Low-PIM 4.3-10-Male Jumper Cable is a plenum-rated, high-performance cable designed for RF applications up to 6 GHz.\u003c\/p\u003e\n\u003cp\u003eWith precision-engineered 0.141-type cable and 4.3-10-Male connectors, this 1-meter (3.3 ft) cable delivers ultra-low PIM (≤ -160 dBc) and excellent RF performance to ensure reliable signal quality and minimal interference.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis cable is ideal for Distributed Antenna Systems (DAS), 4G LTE, and 5G installations, offering low insertion loss, excellent shielding, and high durability. Its IP67-rated construction is suitable for both indoor and outdoor use, with a flexible, easy-to-install design.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnectors: 4.3-10-Male to 4.3-10-Male\u003c\/li\u003e\n\u003cli\u003eLength: 1.0 m (3.3 ft)\u003c\/li\u003e\n\u003cli\u003ePIM (IM3): ≤ -160 dBc @ +43 dBm\u003c\/li\u003e\n\u003cli\u003eVSWR: ≤ 1.15 (0–3 GHz), ≤ 1.30 (3–6 GHz)\u003c\/li\u003e\n\u003cli\u003eInsertion Loss: 0.36 dB @ 600 MHz, 1.30 dB @ 6 GHz\u003c\/li\u003e\n\u003cli\u003eBend Radius: 40 mm (1.6 in) [Repeat], 8 mm (0.3 in) [Install]\u003c\/li\u003e\n\u003cli\u003ePower Handling: 100W (Average), 2.5kW (Peak)\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS, NFPA 262 (UL 910), UL 2043\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWaveform’s Low-PIM 4.3-10-Male Jumper Cable is a trusted choice for high-performance RF applications, offering industry-leading PIM suppression and reliable, high-quality connections for critical network deployments.\u003c\/p\u003e\n\u003ch2\u003eWhat is PIM?\u003c\/h2\u003e\n\u003cp\u003ePassive Intermodulation (PIM) is a type of distortion that occurs in RF systems when non-linearities—caused by factors such as dissimilar materials, poor connections, or corrosion—generate unwanted signals.\u003c\/p\u003e\n\u003cp\u003eThese signals can interfere with communication networks, degrading performance and reducing efficiency. Waveform’s Low PIM jumper cables are meticulously designed to reduce PIM, delivering clean and reliable signal transmission for even the most demanding applications.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40186977353831,"sku":"RS141-4M-4M-3","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/Low-PIM_4.3-10_Jumper_Cable_-_Profile.jpg?v=1736966841"},{"product_id":"4_3-10-male-connector-crimp-for-1_2_inch-coax","title":"4.3-10-Male Connector Crimp for 1\/2\" CommScope Cables","description":"\u003cp\u003eEase connector attachment issues and ensure excellent RF transmission line performance with these Waveform 4.3-10-Male Connector Crimps for CommScope's corrugated 1\/2\" LDF4-50, HL4RPV-50, and AL4RPV-50 coaxial cables.\u003c\/p\u003e\n\u003cp\u003eThe Waveform 4.3-10-Male Connector Crimps for CommScope's corrugated 1\/2\" coaxial cables is a drop-in non-plenum replacement for the CommScope L4HM-D 4.3-10-Male Connector Crimp, with very similar and often even better RF properties.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\nUltra-Low PIM ≤ -160 dBc\n\u003c\/li\u003e\n\u003cli\u003e4.3-10-Male Connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC - 3000 MHz Frequency Support\u003c\/li\u003e\n\u003cli\u003e50 Ohm Impedance\u003c\/li\u003e\n\u003cli\u003eMinimal RF Insertion Loss\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent VSWR\u003c\/li\u003e\n\u003cli\u003eRoHS compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40188825665639,"sku":"RS-AL4RPV-50-4310M-CRIMP","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/4.3-10-CrimpProfile.png?v=1692643059"},{"product_id":"right-angle-sma-male-to-sma-female-adapter","title":"Waveform Right-Angle SMA-Male to SMA-Female Adapter","description":"\u003cp\u003eOur Right-Angle SMA-Male to SMA-Female adapters use high-quality gold-plated brass and bronze alloys, making them durable and strong, with minimal insertion loss.\u003c\/p\u003e\n\u003cp\u003eUseful for routing cables to right-angled ports or where space might be limited, this adapter makes connecting our \u003ca href=\"https:\/\/www.waveform.com\/products\/quadpro\" target=\"_blank\" rel=\"noopener\"\u003eMIMO antenna kits\u003c\/a\u003e to routers like the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/t-mobile-5g-gateway-arcadyan-tmo-g4ar\" target=\"_blank\"\u003eT-Mobile Arcadyan G4AR\u003c\/a\u003e, or the \u003ca href=\"https:\/\/www.waveform.com\/a\/b\/guides\/hotspots\/gl-inet-spitz-ax-gl-x3000nr\" target=\"_blank\"\u003eGL-iNet 5G Spitz AX\u003c\/a\u003e a breeze!\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Angle SMA-Male to SMA-Female connector,\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance,\u003c\/li\u003e\n\u003cli\u003eGold-plated bronze center conductor, PTFE dielectric, and a gold-plated brass body,\u003c\/li\u003e\n\u003cli\u003eVSWR rated to below 1.2 for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"1 Adapter","offer_id":40338959237223,"sku":"ADT-RA-SM-SF","price":9.99,"currency_code":"USD","in_stock":true},{"title":"4 Adapters","offer_id":40338959269991,"sku":"ADT-RA-SM-SF-4","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/ADT-RA-SM-SF2.jpg?v=1702917335"},{"product_id":"twin-window-entry-cable-v1","title":"Waveform Coax Twin Window Entry Cable: Low-Loss, Ultra-Flat Passthrough Cable","description":"","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40365889978471,"sku":"WF-113WP-SFM-2","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/TwinWindowEntryCable.jpg?v=1710435737"},{"product_id":"ts9-sma-adapter","title":"Waveform TS9-Male to SMA-Female Adapters","description":"\u003cp\u003eOur TS9-Male to SMA-Female adapters are the perfect adapters for connecting our \u003ca href=\"https:\/\/www.waveform.com\/products\/quadmini\" rel=\"noopener\" target=\"_blank\"\u003eQuadMini\u003c\/a\u003e and \u003ca href=\"https:\/\/www.waveform.com\/products\/quadpro\" rel=\"noopener\" target=\"_blank\"\u003eQuadPro\u003c\/a\u003e antenna kits to any hotspot or gateway using TS9 connectors.\u003c\/p\u003e\n\u003cp\u003eWe've tested dozens of different adapters, but none of them were good enough. So we sweated the details to make sure these provide a secure grip and excellent RF performance. They include a unique lip and sleeve around the TS9 connector that ensures they will never fall out of your ports.\u003c\/p\u003e\n\u003cp\u003eThey're constructed of gold-plated bronze and a PTFE dielectric to minimize insertion loss and ensure a VSWR below 1.25 for optimal performance up to 6 GHz.\u003c\/p\u003e\n\u003ch2\u003eA Note About TS9 Connectors\u003c\/h2\u003e\n\u003cp\u003eDue to the lack of standardization in TS9 connectors, the exact dimensions of TS9 ports can vary between devices, and it's common to have adapters become loose, and fall out of their ports.\u003c\/p\u003e\n\u003cp\u003eOur adapters are specifically designed to address these issues, ensuring a reliably snug fit for nearly every device.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"2 Pack","offer_id":40701949608039,"sku":"ADT-SF-TM-2","price":9.99,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":40701949640807,"sku":"ADT-SF-TM-4","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/Two-SMA-TS9-Profile.jpg?v=1714141703"},{"product_id":"fakra-z-sma-female","title":"Waveform FAKRA Z to SMA-Female Pigtail Adapter (2-Pack)","description":"\u003cp\u003eOur FAKRA Z to SMA-Female Pigtail Adapters are the perfect adapters for connecting antennas like our QuadMini and QuadPro to any device using FAKRA connectors.\u003c\/p\u003e\n\u003cp\u003eWe tested dozens of FAKRA adapters and found none of them met our standards. So we built this specific design for its secure fit and reliable latch, to ensure top-notch performance and ease of use with all FAKRA devices.\u003c\/p\u003e\n\u003cp\u003eThe cable is a low-loss, highly flexible RG174 to minimize signal loss while providing robust durability. The SMA-Female connector is constructed of gold-plated copper, and the FAKRA connector is made of brass, with a PA66 body, and delivers a VSWR below 1.5 for optimal performance up to 6 GHz.\u003c\/p\u003e\n\u003ch2\u003eUniversal FAKRA Compatibility\u003c\/h2\u003e\n\u003cp\u003eUsing a female (jack) FAKRA Z connector means this adapter connects perfectly to any device that uses FAKRA connectors. FAKRA Z is universally compatible with all FAKRA standards, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFAKRA A (Black) - AM\/FM Radio\u003c\/li\u003e\n\u003cli\u003eFAKRA B (White) - DAB Radio\u003c\/li\u003e\n\u003cli\u003eFAKRA C (Signal Blue) - GPS\u003c\/li\u003e\n\u003cli\u003eFAKRA D (Claret Violet) - Mobile Phones\u003c\/li\u003e\n\u003cli\u003eFAKRA E (Leaf Green) - TV\u003c\/li\u003e\n\u003cli\u003eFAKRA F (Brown) - TV, SiriusXM\u003c\/li\u003e\n\u003cli\u003eFAKRA G (Grey) - SDARS Terrestrial\u003c\/li\u003e\n\u003cli\u003eFAKRA H (Heather Violet) - GPS\u003c\/li\u003e\n\u003cli\u003eFAKRA I (Beige) - Bluetooth\u003c\/li\u003e\n\u003cli\u003eFAKRA K (Curry) - SDARS Satellite\u003c\/li\u003e\n\u003cli\u003eFAKRA L (Red) - VPM\u003c\/li\u003e\n\u003cli\u003eFAKRA M (orange) - TPMS\u003c\/li\u003e\n\u003cli\u003eFAKRA N (Pastel Green)- VPM\u003c\/li\u003e\n\u003cli\u003eFAKRA Z (Water Blue) - Neutral, fits all\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40771935043687,"sku":"PTA-SMAF-FZF-2","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/PTA-SMAF-FZF_Full.jpg?v=1717172692"},{"product_id":"ethernet-window-entry-cable","title":"Waveform Ethernet Window Entry Cable: Ultra-Flat, High-Performance Passthrough Cable","description":"","brand":"Waveform","offers":[{"title":"Default Title","offer_id":40945414504551,"sku":"CAT6WP-RJFF","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/EthernetWEC-01HeroImage_60f8b185-f7a7-4e67-884c-84e237395f24.jpg?v=1738275082"},{"product_id":"sma-lightning-arrestor","title":"SMA Lightning Arrestor Kit","description":"\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_EzwUtf\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"false\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv id=\"product-tab-2-body\" class=\"px-4 py-6 sm:px-6 sm:py-8 sm:hidden tw-hidden !block\" data-testid=\"product-accordion-body\" :id=\"$id('product-tab') + '-body'\" x-collapse=\"\" x-show.important=\"isOpen\" x-ref=\"body\" :class=\"{ '!block': isOpen }\"\u003e\n\u003cdiv class=\"w-full md:w-3\/4\"\u003e\n\u003cdiv class=\"mb-6 sm:mb-10 last-of-type:mb-0\"\u003e\n\u003cdiv class=\"rte-v2\" x-ignore=\"\"\u003e\n\u003cp\u003eGrounding your outdoor antennas is essential to safeguard your home and devices from power surges caused by lightning strikes. To simplify this process, we’ve designed a comprehensive lightning arrester kit tailored for our external MIMO antennas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Design:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur SMA-Female to SMA-Male connectors make it seamless to add surge protection anywhere along your cable path between your external antenna and device. It’s a perfect drop-in solution, enhancing your system’s protection without any hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Protection:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRated for up to 20 KA (2000 J), our lightning arrester provides top-tier protection for your sensitive equipment against powerful electrical surges and lightning strikes. With a wide frequency range of 0-6000 MHz and an ultra-low insertion loss of ≤ 0.25 dB, it ensures minimal signal interference, maintaining optimal performance for even the most sensitive RF applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Grounding Options:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eChoose how you ground your system - either connect to your antenna mast using the terminal lug and the included ground wire, or to a ground bar with the integrated bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof and Reliable:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur kit includes high-quality silicone weatherproofing tape, making it easy to protect your outdoor connections from the elements. Plus, if you're using a Waveform antenna, the extended stalk on the SMA-Female connector allows the weatherproofing boot to slip right over, ensuring a snug, secure fit - even without the tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_U6jzFN\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"true\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv class=\"flex cursor-pointer items-center justify-between bg-gray-100 px-3 py-3 sm:px-6 sm:py-4\" data-testid=\"product-accordion-header\" x-ref=\"header\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Waveform","offers":[{"title":"Single Lightning Arrestor Kit","offer_id":41266932875367,"sku":"WF-LSP-SFM","price":39.99,"currency_code":"USD","in_stock":true},{"title":"2x Lightning Arrestor Kits (For 2x2 setups)","offer_id":41266932908135,"sku":"WF-LSP-SFM-2","price":74.99,"currency_code":"USD","in_stock":true},{"title":"4x Lightning Arrestor Kits (For 4x4 setups)","offer_id":41266932940903,"sku":"WF-LSP-SFM-4","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/SMA-LSP-Hero-Image-v2.jpg?v=1749210967"},{"product_id":"amphenol-rf-ad-nj225p-1","title":"Amphenol RF N-Female to 2.2-5-Male Straight Adapter","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eThese N-Female to \u003cmeta charset=\"utf-8\"\u003e2.2-5 Male adapters are constructed of a white bronze-plated brass body, a PTFE dielectric, and a silver plated beryllium-copper conductor, \u003cmeta charset=\"utf-8\"\u003eto minimize insertion loss and ensure optimal performance up to 6 GHz. \u003c\/span\u003e\u003cspan\u003eThey are low PIM adapters with an impedance of 50 ohm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThey are primarily used for connecting \u003cmeta charset=\"utf-8\"\u003eequipment \u003cmeta charset=\"utf-8\"\u003ewith the more common N-Male connector t\u003cmeta charset=\"utf-8\"\u003ehe \u003cmeta charset=\"utf-8\"\u003e2.2-5-Female ports of the new \u003ca href=\"https:\/\/www.waveform.com\/products\/verizon-5g-network-extender-for-enterprise\"\u003e5G Verizon Network Extender\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eN-Female to 2.2-5-Male connectors\u003c\/li\u003e\n\u003cli\u003e35.25 mm (1.388 inch) long with 16 mm (0.630 inch) diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eW\u003cspan\u003ehite bronze-plated brass body, a PTFE dielectric, and a silver plated beryllium-copper conductor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRated for use at frequencies of up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amphenol RF","offers":[{"title":"Default Title","offer_id":41083033092199,"sku":"AD-NJ225P-1","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/AD-NJ225P-1_F.jpg?v=1731532216"},{"product_id":"coax-window-entry-cable-v2","title":"Waveform Coax Window Entry Cable v2: Low-Loss, Ultra-Thin Passthrough Cable","description":"\u003cp\u003eEasily route cables outside through nearly any window with the Waveform Window Entry Cable. Designed for convenience and minimal intrusion, it simplifies connecting your router to an outdoor antenna—no drilling or complex installations required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility:\u003c\/strong\u003e The slim, flexible 9.6” ribbon works with a wide range of window types, including sliding, awning, hung, casement, and hopper windows. It's crafted for both functionality and ease of use, making it a versatile solution for various setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Cables in One:\u003c\/strong\u003e Equipped with four low-loss, ultra-thin 1.13 cables, the Window Entry Cable enables easy, efficient routing of multiple connections through a single window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular and Versatile:\u003c\/strong\u003e Featuring reinforced SMA connectors, the Window Entry Cable v2 integrates seamlessly with a variety of routers with external antenna ports. It pairs perfectly with our QuadPro and QuadMini antennas, as well as the UltraFlex-Quad Cable, providing a modular, flexible solution for all your connectivity needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Setup:\u003c\/strong\u003e Installation is hassle-free, requiring no specialized tools. Adjustable cable exits on both the indoor and outdoor enclosures make managing your cables straightforward, ensuring a clean and efficient setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eNew \u0026amp; Improved\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWe’ve refined the design of the Window Entry Cable to make the v2 more \u003cstrong\u003edurable, easier to use, and compatible with more windows\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Ribbon Length\u003c\/strong\u003e: Now 9.6” (previously 5.3”), offering greater compatibility with thicker windows, including storm windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Indoor Pigtails\u003c\/strong\u003e: With thicker yet equally flexible cables, and reinforced SMA connectors for added durability without compromising ease of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlready have the v1 and need an upgrade? Reach out to us at \u003ca title=\"mailto:help@waveform.com\" href=\"mailto:help@waveform.com\"\u003ehelp@waveform.com\u003c\/a\u003e, and we’ll exchange your Window Entry Cable for the v2 at no cost.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Quad","offer_id":41153529249895,"sku":"WF-113WP-SFM-4-V2","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Twin","offer_id":41153529282663,"sku":"WF-113WP-SFM-2-V2","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/CoaxWindowEntryCablev2-01Hero_Quad.jpg?v=1737414379"},{"product_id":"2-2-5-male-to-n-female-adapter","title":"2.2-5-Male to N-Female Adapter","description":"\u003cp\u003eThese 2.2-5-Male to N-Female adapters are built with a silver-plated brass body, a PTFE dielectric, and a silver-plated brass conductor, ensuring low insertion loss and optimal performance across frequencies up to 6 GHz.\u003c\/p\u003e\n\u003cp\u003eWith a VSWR of ≤ 1.15 and a 50-ohm impedance, and a robust design rated for temperatures from -40°C to +85°C, they provide a dependable solution for minimizing signal loss and maintaining network integrity.\u003c\/p\u003e\n\u003cp\u003eThey are primarily used for connecting equipment with the more common N-Male connector to the 2.2-5-Female ports of the new \u003ca href=\"https:\/\/www.waveform.com\/products\/verizon-5g-network-extender-for-enterprise\"\u003e5G Verizon Network Extender\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN-Female to 2.2-5-Male connectors\u003c\/li\u003e\n\u003cli\u003e42 mm (1.65 inches) long, 16 mm (0.630 inch) diameter\u003c\/li\u003e\n\u003cli\u003e50 Ohm impedance and ≤ 1.15\u003c\/li\u003e\n\u003cli\u003eLess than 0.22 dB insertion loss and low PIM\u003c\/li\u003e\n\u003cli\u003eMade of silver-plated brass body and conductor with a PTFE dielectric\u003c\/li\u003e\n\u003cli\u003eRated for use at frequencies up to 6 GHz.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":41153827012711,"sku":"ADT-2M-NF","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/2.2-5MaletoNFemaleAdapter-Side_bd2637e9-81e4-405d-a343-52228443f040.jpg?v=1736291748"},{"product_id":"2-watt-n-male-50-ohm-termination-load","title":"Waveform 2 Watt N-Male 50 Ohm Termination Load, DC-6GHz","description":"\u003cp data-start=\"239\" data-end=\"526\" class=\"\"\u003eA compact, high-performance 2 Watt dummy load designed to terminate 50 Ohm RF ports with minimal signal reflection. With an N-Male connector and coverage from 0 to 6 GHz, it’s ideal for DAS installations, test benches, and RF system maintenance.\u003c\/p\u003e\n\u003cp data-start=\"528\" data-end=\"809\" class=\"\"\u003eBuilt with robust materials, including a black anodized aluminum heat sink and white bronze\/brass plating, this termination load ensures reliability in demanding indoor environments. \u003cbr\u003e\u003cbr\u003eIt is an ideal choice for technicians and integrators who need a reliable termination solution with excellent electrical and mechanical stability. Whether you're performing system tuning or terminating unused ports, it delivers consistent performance and long-term durability\u003c\/p\u003e","brand":"RF Industries","offers":[{"title":"Default Title","offer_id":41381891440743,"sku":"RFDL-2W-NM","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/RFRFDL-2W-NM-full.jpg?v=1748011186"},{"product_id":"waveform-dual-sma-lightning-arrestor-with-bracket-sma-female-to-sma-male","title":"Waveform Dual SMA Lightning Arrestor, with Bracket | SMA-Female to SMA-Male","description":"\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_EzwUtf\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"false\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv id=\"product-tab-2-body\" class=\"px-4 py-6 sm:px-6 sm:py-8 sm:hidden tw-hidden !block\" data-testid=\"product-accordion-body\" :id=\"$id('product-tab') + '-body'\" x-collapse=\"\" x-show.important=\"isOpen\" x-ref=\"body\" :class=\"{ '!block': isOpen }\"\u003e\n\u003cdiv class=\"w-full md:w-3\/4\"\u003e\n\u003cdiv class=\"mb-6 sm:mb-10 last-of-type:mb-0\"\u003e\n\u003cdiv class=\"rte-v2\" x-ignore=\"\"\u003e\n\u003cp\u003eGrounding your outdoor antennas is essential to safeguard your home and devices from power surges caused by lightning strikes. To simplify this process, we’ve designed a comprehensive lightning arrester kit tailored for our external MIMO antennas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Design:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur SMA-Female to SMA-Male connectors make it seamless to add surge protection anywhere along your cable path between your external antenna and device. It’s a perfect drop-in solution, enhancing your system’s protection without any hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Protection:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRated for up to 20 KA (2000 J), our lightning arrester provides top-tier protection for your sensitive equipment against powerful electrical surges and lightning strikes. With a wide frequency range of 0-6000 MHz and an ultra-low insertion loss of ≤ 0.25 dB, it ensures minimal signal interference, maintaining optimal performance for even the most sensitive RF applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Grounding Options:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eChoose how you ground your system - either connect to your antenna mast using the terminal lug and the included ground wire, or to a ground bar with the integrated bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof and Reliable:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur kit includes high-quality silicone weatherproofing tape, making it easy to protect your outdoor connections from the elements. Plus, if you're using a Waveform antenna, the extended stalk on the SMA-Female connector allows the weatherproofing boot to slip right over, ensuring a snug, secure fit - even without the tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_U6jzFN\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"true\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv class=\"flex cursor-pointer items-center justify-between bg-gray-100 px-3 py-3 sm:px-6 sm:py-4\" data-testid=\"product-accordion-header\" x-ref=\"header\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":42095298314343,"sku":"WF-LSP-SFM-2-BR","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/SMA-LSP-Hero-Image-v2.jpg?v=1749210967"},{"product_id":"2-watt-termination-load-dc-6ghz","title":"Ventev 2W Termination Load, DC-6GHz","description":"\u003cp\u003eThis ultra-wideband 2-Watt termination load is designed to terminate 50 Ohm RF ports, covering a \u003cmeta charset=\"utf-8\"\u003efrequency range from DC to 6000 MHz . Available in both N-Male and 4.3-10 Male connector options, it’s commonly used in public safety and commercial DAS environments.\u003c\/p\u003e\n\u003cp\u003eIts compact and reliable design ensures low return loss and provides IP65-rated protection for both indoor and outdoor installations. Whether commissioning, tuning, or maintaining a DAS system, this termination is a practical option for stable electrical performance with 50 Ohm impedance and provides consistent, long-lasting durability in demanding installations.\u003c\/p\u003e","brand":"Ventev Terrawave","offers":[{"title":"N-Male","offer_id":42127904374887,"sku":"611511","price":59.99,"currency_code":"USD","in_stock":true},{"title":"4.3-10 Male","offer_id":42127904407655,"sku":"611512","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/Ventev2WTerminationLoad.jpg?v=1769184552"},{"product_id":"2w-termination-load-n-male","title":"Waveform 2W Termination Load, N-Male, DC-6GHz","description":"\u003cp\u003eThis 2-Watt termination load is designed to terminate 50 Ohm RF ports across a wide frequency range from DC to 6000 MHz, making it ideal for public safety and commercial DAS deployments, network commissioning, tuning, and capping unused ports during maintenance.\u003c\/p\u003e\n\u003cp\u003eWith an N-Male connector, this termination delivers a VSWR ≤ 1.2, minimizing signal reflection and helping maintain consistent network performance. The termination is also UV-rated for outdoor use.\u003c\/p\u003e\n\u003cp\u003eThis termination load provides reliable performance across DAS systems by maintaining proper impedance and reducing reflections, helping ensure stable operation during both deployment and ongoing maintenance.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":42257498013799,"sku":"RTL-2W-NM","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/RTL-2W-NM.jpg?v=1773846491"},{"product_id":"2w-termination-load-4-3-10-male","title":"Waveform 2W Termination Load, 4.3-10 Male, DC-6GHz","description":"\u003cp\u003eThis 2-Watt termination load is designed to terminate 50 Ohm RF ports across a wide frequency range from DC to 6000 MHz, making it ideal for public safety and commercial DAS deployments, network commissioning, tuning, and capping unused ports during maintenance.\u003c\/p\u003e\n\u003cp\u003eWith a 4.3-10 Male connector, this termination delivers a VSWR ≤ 1.2, minimizing signal reflection and helping maintain consistent network performance. It's additionally PIM-rated ≤ -160 dBc @ 2×43 dBm, a strong choice for interference-sensitive installations where signal integrity is critical. The termination is also UV-rated for outdoor use.\u003c\/p\u003e\n\u003cp\u003eThis termination load provides reliable performance across DAS systems by maintaining proper impedance and reducing reflections, helping ensure stable operation during both deployment and ongoing maintenance.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44546649161831,"sku":"RTL-2W-4M","price":24.99,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.waveform.com\/collections\/connectors-and-adapters\/waveform.oembed?page=2","provider":"Waveform","version":"1.0","type":"link"}