{"title":"Surge Protectors","description":"","products":[{"product_id":"polyphaser-tsx-nff-p","title":"PolyPhaser TSX-NFF-P RF Low-PIM Lightning Surge Protector","description":"\n\u003cp\u003eThe PolyPhaser TSX-NFF-P lightning surge protector offers \u003cstrong\u003ebi-directional protection\u003c\/strong\u003e from 698-2700 MHz. It offers excellent surge performance based on its patented coil inductor design. It is \u003cstrong\u003eweatherproof\u003c\/strong\u003e when installed. It is RoHS compliant.\u003c\/p\u003e\n\u003cp\u003eThe TSX-NFF-P is a \u003cstrong\u003elow-PIM\u003c\/strong\u003e lightning surge protector. PIM, or passive intermodulation, is form of distortion that occurs in devices like antennas as a result of nonlinearities in the system. It can be caused by dissimilar materials, design flaws, or corrosion by weather or age. PIM can cause significant disruption to system performance. The TSX-NFF-P has been designed with all these factors in mind to minimise PIM.\u003c\/p\u003e\n\n\u003cp\u003eWe recommend using a lightning surge protector in most cases, but particularly if you are installing your signal booster kit in an area with frequent lightning. The outside antenna is positioned high on your building, made of metal and exposed to the elements - very attractive to lightning! We recommend placing the surge protector between the outside antenna and the amplifier unit to protect the amplifier.\u003c\/p\u003e\n\n","brand":"PolyPhaser","offers":[{"title":"Default Title","offer_id":7534711937,"sku":"TSX-NFF-P","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/1434572.jpg?v=1521058046"},{"product_id":"ventev-terrawave-lightning-surge-protector","title":"Ventev Lightning Surge Protector","description":"\u003cp\u003eVentev's Lightning Arrestor is a bi-directional gas discharge tube suppressor that features wide-band operation up to 7 GHz and is rated at IP67.\u003c\/p\u003e\n\u003cp\u003eSimply attach the lightning protector to an access point to help protect an entire network, outdoor antennas, and other wireless equipment from the build-up of static electricity. It is recommended to use 18 American Wire Gauge (AWG) ground wire.\u003c\/p\u003e\n\u003cp\u003eVentev lightning arrestors are RoHS compliant. Ventev's lightning arrestors have been evaluated for compliance with the Reduction of Hazardous Substances, RoHS 3 Directive 2015\/863\/EU and have been determined to not contain substances in excess of RoHS 3 Maximum Concentration Levels.\u003c\/p\u003e\n\u003cp\u003eEvery Ventev lightning arrestor is covered by the company's one-year warranty program.\u003c\/p\u003e","brand":"Ventev Terrawave","offers":[{"title":"Default Title","offer_id":42346709642,"sku":"V-LP-N-P-BHJ","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/Screenshot2021-11-04233054.png?v=1636061546"},{"product_id":"rsrf-75-ohm-lightning-surge-protector-with-f-connectors","title":"75 Ohm Lightning Surge Protector Kit with F-Type Connectors, DC - 3000 MHz","description":"\n\u003cp\u003eA lightning surge protector (LSP) protects the signal booster system if lightning strikes the donor antenna. A lightning surge protector is highly recommended anytime the system's donor antenna is installed outdoors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVSWR: 1.2:1 Max Rating Voltage: 230V\u003c\/li\u003e\n\u003cli\u003eFrequency Range: DC - 3000 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe lightning surge protector should be connected to ground using solid copper grounding wire. It should be installed between the amplifier and the outdoor antenna.\u003c\/p\u003e\n\u003cp\u003eThis protector is for 75 ohm signal booster systems, which typically utilizes F-type connectors. This Lightning Surge Protector kit includes a 5' jumper cable and a copper grounding wire.\u003c\/p\u003e\n\n\u003cp\u003eAccording to the National Electric Code (NEC), a surge protector should be installed as near as possible to the point where the cable enters the house, but not near combustible materials. Since many attic crawl spaces contain combustible material, we suggest installing the surge protector outside the building, near the point of entry. We have included a 5' jumper cable in case the cable needs to be crimped to accommodate this.\u003c\/p\u003e\n\u003cp\u003eThe NEC also requires grounding the antenna mast. Tall antenna masts are a prime target for lightning strikes because of their height and tendency to accumulate static electricity. The kits includes a grounding cable. If your antenna mast is painted, you should make sure that you scrape off any paint before attaching this grounding wire.\u003c\/p\u003e\n\u003cp\u003ePlease see our detailed guide to grounding and using a Lightning Surge Protector \u003ca href=\"\/pages\/signal-booster-antenna-grounding\" title=\"grounding a signal booster antenna with a lightning surge protector\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":19838300553319,"sku":"RSRF-LSP-75-KIT","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00570x1024.jpg?v=1557185044"},{"product_id":"pair-of-rsrf-50-ohm-lightning-surge-protector-kits-with-n-connectors","title":"2x 50 Ohm Lightning Surge Protector Kits with N-Connectors","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003eA pair of 50 Ohm Lightning Surge protectors, for custom MIMO Antenna Kits only.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA lightning surge protector protects your cellular amplifier system in case lightning strikes the donor antenna. A lightning surge protector is highly recommended anytime the system's donor antenna is installed outdoors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVSWR: 1.2:1 \u003c\/li\u003e\n\u003cli\u003eN-Female to N-Female connectors\u003c\/li\u003e\n\u003cli\u003eFrequency Range: DC ~ 3GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYour lightning surge protector should be connected to ground using solid copper grounding wire. It should be installed between the amplifier and the outdoor antenna.\u003c\/p\u003e\n\u003cp\u003eThis protector is for 50 ohm signal booster systems, which typically utilizes N-type connectors. This Lightning Surge Protector kit includes a 5' jumper cable and a copper grounding wire.\u003c\/p\u003e\n\n\u003cp\u003eAccording to the National Electric Code (NEC), a surge protector should be installed as near as possible to the point where the cable enters the house, but not near combustible materials. Since many attic crawl spaces contain combustible material, we suggest installing the surge protector outside the building, near the point of entry. We have included a 5' jumper cable in case the cable needs to be crimped to accommodate this.\u003c\/p\u003e\n\u003cp\u003eThe NEC also requires grounding the antenna mast. Tall antenna masts are a prime target for lightning strikes because of their height and tendency to accumulate static electricity. The kits includes a grounding cable. If your antenna mast is painted, you should make sure that you scrape off any paint before attaching this grounding wire.\u003c\/p\u003e\n\u003cp\u003ePlease see our detailed guide to grounding and using a Lightning Surge Protector \u003ca href=\"\/pages\/signal-booster-antenna-grounding\" title=\"grounding a signal booster antenna with a lightning surge protector\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"A pair of Lightning Surge protectors; for MIMO Antenna Kits only","offer_id":39945376268391,"sku":"2-WF-LSP-50-KIT","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00553x1024_360e5ea2-5595-4265-86f4-d705b9b81d23.jpg?v=1600300614"},{"product_id":"50-ohm-surge-protector","title":"50 Ohm Lightning Surge Protector Kit with N-Female Connectors, DC - 6000 MHz","description":"\n\u003cp\u003eA lightning surge protector protects your cellular amplifier system in case lightning strikes the donor antenna. A lightning surge protector is highly recommended anytime the system's donor antenna is installed outdoors.\u003c\/p\u003e\n\u003cp\u003eThis protector is for 50 Ohm signal booster systems, which typically utilize N-type connectors. This Lightning Surge Protector kit includes a 5 ft RS240 jumper cable with N-Male connectors and a 5 ft copper grounding wire with ring terminals.\u003c\/p\u003e\n\u003cp\u003ePlease see our detailed guide to grounding and using a Lightning Surge Protector \u003ca title=\"grounding a signal booster antenna with a lightning surge protector\" href=\"\/pages\/signal-booster-antenna-grounding\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstalling a Lightning Surge Protector\u003c\/h2\u003e\n\u003cp\u003eYour lightning surge protector should be connected to the ground using solid copper grounding wire. It should be installed outdoors, between the amplifier and the outdoor antenna.\u003c\/p\u003e\n\u003cp\u003eAccording to the National Electric Code (NEC), a surge protector should be installed as near as possible to the point where the cable enters the house, but not near combustible materials. Since many attic crawl spaces contain combustible material, we suggest installing the surge protector outside the building, near the point of entry. We have included a 5ft jumper cable in case the cable needs to be crimped to accommodate this.\u003c\/p\u003e\n\u003ch2\u003eGrounding the Antenna Mast\u003c\/h2\u003e\n\u003cp\u003eThe NEC also requires grounding the antenna mast. Tall antenna masts are a prime target for lightning strikes because of their height and tendency to accumulate static electricity. This kit includes a grounding cable to ground your lightning surge protector to your antenna mast. You should additionally ground your antenna mast using 8 AWG or higher ground wire.\u003c\/p\u003e\n\u003cp\u003eIf your antenna mast is painted, you should make sure that you scrape off any paint before attaching this grounding wire.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e50 Ohm N-Female Lightning Surge Protector, DC - 6GHz\u003c\/li\u003e\n\u003cli\u003e5 ft copper ground wire with ring terminals\u003c\/li\u003e\n\u003cli\u003e5 ft RS240 jumper cable with N-male connectors\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveform.com\/surge-protector-manual\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eImpedance: 50 Ohm\u003c\/li\u003e\n\u003cli\u003eFrequency Range: DC - 6GHz\u003c\/li\u003e\n\u003cli\u003eVSWR: \u0026lt; 1.20\u003c\/li\u003e\n\u003cli\u003eInsertion Loss: ≤ 0.5 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Impulse Discharge Current (8\/20 μs): 20 KA, 2000 J\u003c\/li\u003e\n\u003cli\u003eN-Female to N-Female Bulkhead Connector\u003c\/li\u003e\n\u003cli\u003eCopper Ground Wire:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGauge: 10 AWG\u003c\/li\u003e\n\u003cli\u003eLength: 5 ft\u003c\/li\u003e\n\u003cli\u003eRing Terminal Diameter: 4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRS240 Jumper Cable:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eCable Type: N-Type\u003c\/li\u003e\n\u003cli\u003eLength: 5 ft\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector Type: N-Male to N-Male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\n","brand":"Waveform","offers":[{"title":"Default Title","offer_id":39720709455975,"sku":"WF-LSP-50-KIT","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC02457_v2_All_1024x_05e23431-4dcd-4773-90ce-4cb3db1245d3.png?v=1675465251"},{"product_id":"4x-rsrf-50-ohm-lightning-surge-protector-kits-with-n-connectors","title":"4x 50 Ohm Lightning Surge Protector Kits with N-Connectors","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003eTwo pairs of 50 Ohm Lightning Surge protectors, for custom MIMO Antenna Kits only.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA lightning surge protector protects your cellular amplifier system in case lightning strikes the donor antenna. A lightning surge protector is highly recommended anytime the system's donor antenna is installed outdoors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVSWR: 1.2:1 \u003c\/li\u003e\n\u003cli\u003eN-Female to N-Female connectors\u003c\/li\u003e\n\u003cli\u003eFrequency Range: DC ~ 3GHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYour lightning surge protector should be connected to ground using solid copper grounding wire. It should be installed between the amplifier and the outdoor antenna.\u003c\/p\u003e\n\u003cp\u003eThis protector is for 50 ohm signal booster systems, which typically utilizes N-type connectors. This Lightning Surge Protector kit includes a 5' jumper cable and a copper grounding wire.\u003c\/p\u003e\n\n\u003cp\u003eAccording to the National Electric Code (NEC), a surge protector should be installed as near as possible to the point where the cable enters the house, but not near combustible materials. Since many attic crawl spaces contain combustible material, we suggest installing the surge protector outside the building, near the point of entry. We have included a 5' jumper cable in case the cable needs to be crimped to accommodate this.\u003c\/p\u003e\n\u003cp\u003eThe NEC also requires grounding the antenna mast. Tall antenna masts are a prime target for lightning strikes because of their height and tendency to accumulate static electricity. The kits includes a grounding cable. If your antenna mast is painted, you should make sure that you scrape off any paint before attaching this grounding wire.\u003c\/p\u003e\n\u003cp\u003ePlease see our detailed guide to grounding and using a Lightning Surge Protector \u003ca title=\"grounding a signal booster antenna with a lightning surge protector\" href=\"\/pages\/signal-booster-antenna-grounding\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Four Lightning Surge protectors; for MIMO Antenna Kits only","offer_id":39945376006247,"sku":"4-WF-LSP-50-KIT","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/products\/DSC00553x1024_4ac0cd27-07f3-4582-9ae2-55f0307f828e.jpg?v=1667507056"},{"product_id":"sma-lightning-arrestor","title":"SMA Lightning Arrestor Kit","description":"\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_EzwUtf\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"false\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv id=\"product-tab-2-body\" class=\"px-4 py-6 sm:px-6 sm:py-8 sm:hidden tw-hidden !block\" data-testid=\"product-accordion-body\" :id=\"$id('product-tab') + '-body'\" x-collapse=\"\" x-show.important=\"isOpen\" x-ref=\"body\" :class=\"{ '!block': isOpen }\"\u003e\n\u003cdiv class=\"w-full md:w-3\/4\"\u003e\n\u003cdiv class=\"mb-6 sm:mb-10 last-of-type:mb-0\"\u003e\n\u003cdiv class=\"rte-v2\" x-ignore=\"\"\u003e\n\u003cp\u003eGrounding your outdoor antennas is essential to safeguard your home and devices from power surges caused by lightning strikes. To simplify this process, we’ve designed a comprehensive lightning arrester kit tailored for our external MIMO antennas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Design:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur SMA-Female to SMA-Male connectors make it seamless to add surge protection anywhere along your cable path between your external antenna and device. It’s a perfect drop-in solution, enhancing your system’s protection without any hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Protection:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRated for up to 20 KA (2000 J), our lightning arrester provides top-tier protection for your sensitive equipment against powerful electrical surges and lightning strikes. With a wide frequency range of 0-6000 MHz and an ultra-low insertion loss of ≤ 0.25 dB, it ensures minimal signal interference, maintaining optimal performance for even the most sensitive RF applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Grounding Options:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eChoose how you ground your system - either connect to your antenna mast using the terminal lug and the included ground wire, or to a ground bar with the integrated bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof and Reliable:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur kit includes high-quality silicone weatherproofing tape, making it easy to protect your outdoor connections from the elements. Plus, if you're using a Waveform antenna, the extended stalk on the SMA-Female connector allows the weatherproofing boot to slip right over, ensuring a snug, secure fit - even without the tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_U6jzFN\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"true\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv class=\"flex cursor-pointer items-center justify-between bg-gray-100 px-3 py-3 sm:px-6 sm:py-4\" data-testid=\"product-accordion-header\" x-ref=\"header\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Waveform","offers":[{"title":"Single Lightning Arrestor Kit","offer_id":41266932875367,"sku":"WF-LSP-SFM","price":39.99,"currency_code":"USD","in_stock":true},{"title":"2x Lightning Arrestor Kits (For 2x2 setups)","offer_id":41266932908135,"sku":"WF-LSP-SFM-2","price":74.99,"currency_code":"USD","in_stock":true},{"title":"4x Lightning Arrestor Kits (For 4x4 setups)","offer_id":41266932940903,"sku":"WF-LSP-SFM-4","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/SMA-LSP-Hero-Image-v2.jpg?v=1749210967"},{"product_id":"waveform-dual-sma-lightning-arrestor-with-bracket-sma-female-to-sma-male","title":"Waveform Dual SMA Lightning Arrestor, with Bracket | SMA-Female to SMA-Male","description":"\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_EzwUtf\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"false\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv id=\"product-tab-2-body\" class=\"px-4 py-6 sm:px-6 sm:py-8 sm:hidden tw-hidden !block\" data-testid=\"product-accordion-body\" :id=\"$id('product-tab') + '-body'\" x-collapse=\"\" x-show.important=\"isOpen\" x-ref=\"body\" :class=\"{ '!block': isOpen }\"\u003e\n\u003cdiv class=\"w-full md:w-3\/4\"\u003e\n\u003cdiv class=\"mb-6 sm:mb-10 last-of-type:mb-0\"\u003e\n\u003cdiv class=\"rte-v2\" x-ignore=\"\"\u003e\n\u003cp\u003eGrounding your outdoor antennas is essential to safeguard your home and devices from power surges caused by lightning strikes. To simplify this process, we’ve designed a comprehensive lightning arrester kit tailored for our external MIMO antennas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Design:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur SMA-Female to SMA-Male connectors make it seamless to add surge protection anywhere along your cable path between your external antenna and device. It’s a perfect drop-in solution, enhancing your system’s protection without any hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Protection:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRated for up to 20 KA (2000 J), our lightning arrester provides top-tier protection for your sensitive equipment against powerful electrical surges and lightning strikes. With a wide frequency range of 0-6000 MHz and an ultra-low insertion loss of ≤ 0.25 dB, it ensures minimal signal interference, maintaining optimal performance for even the most sensitive RF applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Grounding Options:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eChoose how you ground your system - either connect to your antenna mast using the terminal lug and the included ground wire, or to a ground bar with the integrated bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeatherproof and Reliable:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOur kit includes high-quality silicone weatherproofing tape, making it easy to protect your outdoor connections from the elements. Plus, if you're using a Waveform antenna, the extended stalk on the SMA-Female connector allows the weatherproofing boot to slip right over, ensuring a snug, secure fit - even without the tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"shopify-section mb-4 section-accordion\" id=\"shopify-section-template--15470296858727__accordion_generic_U6jzFN\"\u003e\n\u003cdiv class=\"rounded-md border border-solid border-[#ededed] sm:scroll-mt-20\" data-default-open-mobile=\"false\" data-default-open-desktop=\"true\" data-testid=\"product-accordion\" x-id=\"['product-tab']\" x-init=\"isOpen = !!($refs.body.offsetWidth || $refs.body.offsetHeight || $refs.body.getClientRects().length)\" x-data=\"{ isOpen: false }\"\u003e\n\u003cdiv class=\"flex cursor-pointer items-center justify-between bg-gray-100 px-3 py-3 sm:px-6 sm:py-4\" data-testid=\"product-accordion-header\" x-ref=\"header\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":42095298314343,"sku":"WF-LSP-SFM-2-BR","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0358\/5537\/files\/SMA-LSP-Hero-Image-v2.jpg?v=1749210967"},{"product_id":"waveform-quadmini-low-profile-4x4-mimo-window-antenna-kit-10-ft-getwireless","title":"Waveform QuadMini: Low-Profile 4x4 MIMO Window Antenna Kit | 10 ft | GetWireless","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44255835422823,"sku":"WF-QMIN-1-GW","price":174.0,"currency_code":"USD","in_stock":true}]},{"product_id":"waveform-dualmini-low-profile-2x2-mimo-window-antenna-complete-kit-one-10-ft-getwireless","title":"Waveform DualMini: Low-Profile 2x2 MIMO Window Antenna Complete Kit One 10 ft | GetWireless","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44255893749863,"sku":"WF-DMIN-1-GW","price":105.0,"currency_code":"USD","in_stock":true}]},{"product_id":"waveform-dualplus-2x2-mimo-ultra-directional-log-periodic-antenna-20-ft-getwireless","title":"Waveform DualPlus: 2x2 MIMO Ultra-Directional Log Periodic Antenna | 20 ft | GetWireless","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44255908364391,"sku":"WF-DPLU-2-GW","price":209.0,"currency_code":"USD","in_stock":true}]},{"product_id":"waveform-quadpro-4x4-mimo-panel-outdoor-antenna-kit-20-ft-getwireless","title":"Waveform QuadPro: 4x4 MIMO Panel Outdoor Antenna Kit | 20 ft | GetWireless","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44255920848999,"sku":"WF-QPRO-2-GW","price":192.0,"currency_code":"USD","in_stock":true}]},{"product_id":"moso-4gid1-indoor-cbrs-radio","title":"Moso 4GID1: Indoor CBRS Radio","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44303890808935,"sku":"SCE4255-B48","price":1344.99,"currency_code":"USD","in_stock":true}]},{"product_id":"moso-4god1-outdoor-cbrs-radio","title":"Moso 4GOD1: Outdoor CBRS Radio","description":"\u003ch2\u003eQUOTE ONLY PRODUCT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waveform","offers":[{"title":"Default Title","offer_id":44303904047207,"sku":"SCO4255P-BC-A10","price":1899.99,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.waveform.com\/collections\/surge-protectors\/over-1000.oembed","provider":"Waveform","version":"1.0","type":"link"}