This is an open box item. The product will contain all original parts and accessories. Open Box items may contain superficial scratches that do not affect performance. Open box units can be returned within 30 days from receipt of the product for a full refund (not including any expedited shipping costs).
If you're looking to get the absolute best data rates for your LTE or 5G hotspot, using cross-polarized MIMO external antennas is often the best option.
Our MIMO Log Periodic 11 dBi Hotspot/Router External Antenna kits include everything you need, including the adapters necessary to connect the MIMO antennas to your hotspot or LTE router.
Our Log Periodic antennas offer up to 11 dBi gain between 1710 and 2700 MHz, and 10 dBi gain between 600 MHz and 900 MHz.
These antennas are also sometimes referred to as "yagi antennas" by they are technically log periodic antennas.
MIMO Log Periodic vs MIMO Panel
We also sell a MIMO Panel Antenna Kit for Hotspots/Routers that is very similar to this kit but with slightly lower gain and directivity. We recommend using the MIMO Log Periodic Antennas if you have line-of-sight to your nearest cell towers. If you're surrounded by trees, buildings, or hills, the MIMO Panel Antenna Kit will likely perform somewhat better than the configuration on this page.
- 2x Wideband Log Periodic Antenna including pole-mount hardware
- 2x 30 ft Ultra-Low Loss RS400 N-Male to N-Male Coaxial Cable
- 2x SMA-Male to N-Female or TS9-Male to N-Female or U.FL-Male to N-Female Pigtail Adapters
- 2x N-Male to N-Male Barrel Adapters (for setup and testing only)
- 1x Universal J-Mount Antenna Mount
- Optional: 2x Lightning Surge Protector Kit including 5 ft RS200 cable and grounding cable
- User manual
Lightning Surge Protectors
We highly recommend using our RSRF Lightning Surge Protector Kits to product your hotspot or 4G LTE/5G router from electrical surges due to lightning. Our Lightning Surge Protector Kits include a 5 ft RS200 Jumper and a short length of grounding cable.
Our RSRF SMA-Male to N-Female, TS9-Male to N-Female and U.FL-Male to N-Female adapters allow our MIMO antennas to be connected to almost any hotspot or LTE router. Please choose the correct adapter based on the hotspot type you are using.
LTE routers like devices by Cradlepoint, MoFi, and Pepwave typically make use of SMA connectors. Battery-powered hotspots like the Verizon MiFi Jetpack and the Netgear Nighthawk M1 MR1100 may have TS9 connectors. Some devices without external antenna ports like the T-Mobile High Speed 5G Internet Gateway may have internal U.FL connectors.
Our detailed guide for your hotspot or 4G LTE/5G router
Every hotspot and router is different, so we’ve written up detailed guides for some of the most common devices here.
We suggest reading our guide for your router, or referring to your user manual. We know, there’s a lot of information out there and this can get very technical. Don’t be afraid to reach out to us for support!
Frequency bands support
Our wideband log-periodic antennas support almost every 3G, 4G LTE, and low/mid-band 5G service in use in the US and across the world today:
US 4G LTE Bands:
- AT&T: B2, B4, B5, B12, B17, B29, B30, B66
- Verizon: B2, B4, B5, B13, B66
- T-Mobile: B2, B4, B5, B12, B66, B71
- Sprint: B25 B26, B41
All supported US Frequency Bands:
- Band 2 (1900 MHz)
- Band 4 (1700/2100 MHz)
- Band 5 (850 MHz)
- Band 12 (700 MHz)
- Band 13 (700 MHz)
- Band 14 (700 MHz)
- Band 17 (700 MHz)
- Band 25 (1900 MHz)
- Band 26 (850 MHz)
- Band 30 (2100 MHz)
- Band 66 (2100 MHz)
- Band 71 (600 MHz)
All supported LTE Bands: Band 1-10, Band 12-20, Band 23, Band 25-30, Band 33-41, Band 65-71, B85
Supported 5G Bands in use today:
- AT&T: n5
- T-Mobile: n71
- Sprint: n41
All supported 5G Bands: n1, n2, n3, n5, n7, n8, n12, n14, n18, n20, n25, n26, n28, n29, n30 n34, n38, n39, n40, n41, n65, n66, n70, n71, n80, n81, n82, n83, n84, n86, n89, n90, n95