The weBoost (Wilson) 10 dB Signal Taps allows you to split the signal from an amplifier with negligible signal loss. These splitters are wide-band and cover frequencies between 700-2700 MHz, and will work with all amplifiers available on our website.

The weBoost (Wilson) Signal Taps we offer are a 10 dB Tap with a 0.5 dB Pass-Thru. They splits the input signal into 90% down one side (-5 dB Passthru), and 10% down the other side (-10 dB Tap).

They are used to split the amplified signal for multiple indoor antennas in signal distribution system with minimum signal loss, or for controlling the amount of signal to small and large areas. 

Unlike a conventional splitter, a tap does not split the signal equally in half. Instead more signal is sent down one side than the other. You can use this splitter if you wish to cover two areas which are different in size. Alternatively, when used with other splitters, it can be used to create a system of many internal antennas with customized coverage areas.

Typically a 2ft cable is used to connect the splitter to the amplifier. Any cable length can be used, but the total cable length in the system should be kept to a minimum to minimize attenuation. Lengths of coaxial cable can then connect the splitter to the internal antennas. It has a weatherproof case suitable for indoor or outdoor use.

Product options

There are two different tap options and which one you need depends on which system you currently have. If you are unsure which tap is best suited for your system please contact us and we can help.

• 50 ohm - N-Female Connector (859907). For 50 ohm systems only.
• 75 ohm - F-Female Connector (859976). For 75 ohm systems only.

Warranty

Wilson Electronics warranties all of their home amplifiers, vehicle amplifiers, antennas, and RF components for 2 years and all of their business amplifiers for 3 years against any workmanship or material defects.

Read more about Wilson Electronics’s warranty policy via their weBoost subsidiary.